collapse

Advertisement


Author Topic: Who else has a hot rod project? lets see em!  (Read 12454 times)

Offline Axle

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2009
  • Posts: 1946
  • Location: Issaquah
Re: Who else has a hot rod project? lets see em!
« Reply #75 on: April 21, 2019, 08:36:38 AM »
Another picture of it.
The plate is 1VM. Not a special ordered plate either but a collector edition. My mother said is stands for '1 vicious Mustang'. Pretty cool that they got that number.
I am the man what runs with the football: Jerry Clower

Offline Axle

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2009
  • Posts: 1946
  • Location: Issaquah
Re: Who else has a hot rod project? lets see em!
« Reply #76 on: April 21, 2019, 08:39:26 AM »
And here is one of the engine bay. Looks nice.
I am the man what runs with the football: Jerry Clower

Offline Blacktail Sniper

  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Oct 2009
  • Posts: 5414
  • Location: Rochester, Washington
  • Kill'em all...let the gravy sort'em out!!!
Re: Who else has a hot rod project? lets see em!
« Reply #77 on: April 21, 2019, 09:42:16 AM »
Latest project, it was passed on to me by some very old and close family friends.  It was last driven in 1985 and parked in a garage where it sat until I pulled it out a couple months ago.

It is better to be consistently incorrect than inconsistently correct...

Sarcasm: The ability to insult stupid people without them realizing it. 

My level of sarcasm depends on your level of stupidity...

Sarcasm makes smart people laugh and stupid people mad.

Offline Jpmiller

  • Political Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2016
  • Posts: 2597
  • Location: Wilkeson
Re: Who else has a hot rod project? lets see em!
« Reply #78 on: April 22, 2019, 07:52:42 AM »
My wife wants one of those old Chevy's so bad. What does it need done to it?

Offline Blacktail Sniper

  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Oct 2009
  • Posts: 5414
  • Location: Rochester, Washington
  • Kill'em all...let the gravy sort'em out!!!
Re: Who else has a hot rod project? lets see em!
« Reply #79 on: April 22, 2019, 08:20:18 AM »
I haven't had time to check if the engine is frozen from sitting, but at the least is a complete tune, oil change and have to get a battery. 

The brakes were not frozen, which surprised me, but they are also not working at all, so a complete brake redo.

Have to drain the "varnish" from the gas tank, may even need a new tank at this point.

Very little rust on it with a couple dime sized spots that have rusted through so far.  But I have just not had time to dig into it correctly. 
It is better to be consistently incorrect than inconsistently correct...

Sarcasm: The ability to insult stupid people without them realizing it. 

My level of sarcasm depends on your level of stupidity...

Sarcasm makes smart people laugh and stupid people mad.

Offline Jpmiller

  • Political Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2016
  • Posts: 2597
  • Location: Wilkeson
Re: Who else has a hot rod project? lets see em!
« Reply #80 on: April 22, 2019, 09:39:37 AM »
I haven't had time to check if the engine is frozen from sitting, but at the least is a complete tune, oil change and have to get a battery. 

The brakes were not frozen, which surprised me, but they are also not working at all, so a complete brake redo.

Have to drain the "varnish" from the gas tank, may even need a new tank at this point.

Very little rust on it with a couple dime sized spots that have rusted through so far.  But I have just not had time to dig into it correctly.

Somehow I didn't realize 85 was thirty some years ago lol hope it's all in good enough shape it doesn't take too much to get her running. I've always hated having to flush out the old bad gas but I've never had to do it that old. Good luck!

Offline JohnVH

  • Giggidy
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2011
  • Posts: 1879
  • Location: PNW
Re: Who else has a hot rod project? lets see em!
« Reply #81 on: April 22, 2019, 10:45:20 AM »
67 camaro, been working on it too long, but itll be cool when its done! Pic of what it looked like when I got it.

Offline Fish4Fun

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Sep 2007
  • Posts: 873
  • Location: Renton
Re: Who else has a hot rod project? lets see em!
« Reply #82 on: April 22, 2019, 11:11:12 AM »
And here is one of the engine bay. Looks nice.

Hope to see the car at the Spring Opener over at the XXX in May

Offline DRobnsn

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2009
  • Posts: 897
  • Location: wetside
Re: Who else has a hot rod project? lets see em!
« Reply #83 on: April 22, 2019, 02:50:31 PM »
I haven't had time to check if the engine is frozen from sitting, but at the least is a complete tune, oil change and have to get a battery. 

The brakes were not frozen, which surprised me, but they are also not working at all, so a complete brake redo.

Have to drain the "varnish" from the gas tank, may even need a new tank at this point.

Very little rust on it with a couple dime sized spots that have rusted through so far.  But I have just not had time to dig into it correctly.

Somehow I didn't realize 85 was thirty some years ago lol hope it's all in good enough shape it doesn't take too much to get her running. I've always hated having to flush out the old bad gas but I've never had to do it that old. Good luck!

85 30 some years ago  :bash:   :chuckle:

Might be worth trying to run it. That old 80s gas is far better than the junk we have now.

Offline DRobnsn

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2009
  • Posts: 897
  • Location: wetside
Re: Who else has a hot rod project? lets see em!
« Reply #84 on: April 22, 2019, 02:52:56 PM »
Latest project, it was passed on to me by some very old and close family friends.  It was last driven in 1985 and parked in a garage where it sat until I pulled it out a couple months ago.

That car wash is kinda handy. Just wish they had a bit more pressure. Nice project! 

Offline trophyelk6x6

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2008
  • Posts: 791
  • Location: Belfair WA
Re: Who else has a hot rod project? lets see em!
« Reply #85 on: April 22, 2019, 05:10:59 PM »
right up my alley, love restoring cars.  These are my last few projects I bought. Going to keep my red nova. It's going to get a disc ford 9" from Currie and a GM crate 350 425HP.

Offline BDildine

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Aug 2016
  • Posts: 323
  • Location: Tacoma
    • https://www.facebook.com/brian.dildine
  • Groups: TSC,, NRA Life, RMEF, PF
Re: Who else has a hot rod project? lets see em!
« Reply #86 on: April 23, 2019, 08:41:13 AM »
Not to much of a Hot Rod but a long time in the restoration. 
Thatís a beauty of an unstyled!

Offline JohnVH

  • Giggidy
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2011
  • Posts: 1879
  • Location: PNW
Re: Who else has a hot rod project? lets see em!
« Reply #87 on: April 23, 2019, 09:45:58 AM »
Awesome tractor, Id like an old one with a flywheel someday

Offline Axle

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2009
  • Posts: 1946
  • Location: Issaquah
Re: Who else has a hot rod project? lets see em!
« Reply #88 on: April 25, 2019, 05:50:52 PM »
Oh tractors....you just had to bring that one up!
Well, I did one of them a few years ago too.
It seemed like the parts would never end.
Sure looks nice now though.
It was a huge project for a buddy.
I also restored his dump truck a couple years before that.
I am the man what runs with the football: Jerry Clower

Offline WapitiTalk1

  • Past Sponsor
  • Trade Count: (+9)
  • Old Salt
  • *****
  • Join Date: Oct 2011
  • Posts: 5082
  • Location: The Evergreen State
  • Groups: RMEF, NRA, US Army (R)
Re: Who else has a hot rod project? lets see em!
« Reply #89 on: April 25, 2019, 05:52:07 PM »
Oh tractors....you just had to bring that one up!
Well, I did one of them a few years ago too.
It seemed like the parts would never end.
Sure looks nice now though.
It was a huge project for a buddy.
I also restored his dump truck a couple years before that.

How awesome it that!!
Darton Archery Maverick II
Traditions Vortek StrikeFire Smoke Pole
Weatherby VG-2 Boomstick
"Poking at a campfire with a stick is one of life's great satisfactions." Patrick F. McManus

 


* Advertisement

* Recent Topics

What Elk Management Change Proposals do you Support by huntnphool
[Today at 12:34:40 AM]


JP roller style AR trigger group by Quaka Wacka
[Today at 12:07:42 AM]


Should Washington Move to a Draw Only Management for Yakima, Colockum, and Blues by Colville
[Yesterday at 11:31:34 PM]


Kelly hill spring bear help??? asking for a friend by 270
[Yesterday at 10:46:30 PM]


Wts One of kind Ruger 77 tang safety 25-06 by huntnphool
[Yesterday at 10:31:53 PM]


Unit 1 Idaho Moose by Camo
[Yesterday at 10:31:31 PM]


InReach or Spot X Messager? Why? by buglebrush
[Yesterday at 10:25:04 PM]


Tag Drawing Results by luvmystang67
[Yesterday at 10:20:49 PM]


2020 Sheds....post them here!!! by Tbob
[Yesterday at 10:18:25 PM]


Any places to Shrimp or crab from shore or pier. by ligthouse7669
[Yesterday at 10:10:59 PM]


Morel report? by quackkiller
[Yesterday at 09:57:25 PM]


ElkShape Podcast by Special T
[Yesterday at 09:07:44 PM]


Knight Bighorn sale by Damnimissed
[Yesterday at 08:45:31 PM]


F/S- Smith & Wesson M&P .45 Shield with Holster." Final Price Drop" by BLDtraLR
[Yesterday at 08:13:27 PM]


Sell: X CALIBER 30 CAL 1/10 5R RIFLED BLANK by TooTallMike
[Yesterday at 07:47:30 PM]


Iver Johnson enforcer and browning bar for sale by treefarmer
[Yesterday at 07:36:55 PM]


Shad by Backstrap
[Yesterday at 07:34:30 PM]


Newbie Fishing Questions? by simondude
[Yesterday at 07:18:56 PM]


Idaho deer elk antelope draw by 2MANY
[Yesterday at 06:27:13 PM]