collapse

Advertisement


Author Topic: Who else has a hot rod project? lets see em!  (Read 71432 times)

Offline BoomWhop

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Dec 2008
  • Posts: 894
  • Location: Snohomish
Re: Who else has a hot rod project? lets see em!
« Reply #195 on: October 28, 2021, 02:52:34 PM »
Just finished this project this summer. 1st time on the road after 60 years.
If your gonna be Dumb you better be Tough

Offline Dan-o

  • Global Moderator
  • Trade Count: (+24)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 16716
Re: Who else has a hot rod project? lets see em!
« Reply #196 on: October 28, 2021, 04:08:52 PM »
Just finished this project this summer. 1st time on the road after 60 years.

AWESOME
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Offline Badhabit

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: May 2007
  • Posts: 1208
Re: Who else has a hot rod project? lets see em!
« Reply #197 on: October 28, 2021, 05:22:44 PM »
I need to find a 71 442 convertible for a project car.

Offline Alchase

  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Apr 2007
  • Posts: 19873
  • Location: Tinker AFB, OK
Re: Who else has a hot rod project? lets see em!
« Reply #198 on: October 28, 2021, 07:19:41 PM »
Just finished this project this summer. 1st time on the road after 60 years.

Very cool!
Is it stock? If not I would Rat that bad boy out,  :chuckle:
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

Offline RugerRay

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2016
  • Posts: 238
  • Location: Colville
Re: Who else has a hot rod project? lets see em!
« Reply #199 on: October 29, 2021, 07:25:34 AM »
Awesome, I drove a fire truck red 67 in high school.  Man, do I wish I didn't have to sell it.  Same engine, I got tired of people telling me I was an idiot and it was a 351.
[/quote]

Those trucks sure look good in red. I'm sure a lot of us wish we could go back in time and grab our high school vehicle. For me it was a '71 FJ40. Haha. I've had to explain the 352 motor several times already.

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 5552
  • Location: Toledo
Re: Who else has a hot rod project? lets see em!
« Reply #200 on: October 29, 2021, 07:24:23 PM »
I was recently gifted this one owner, 1967 Ford with a 352 from a very generous coworker and towed it home last night. My coworker's parents bought it brand new, and has been parked since they were no longer able to drive in 2000. Been garage kept for the past 21 years and ran when it was parked. My oldest son turns 16 next April and I'll be surprising him with it this weekend. It's going to be our winter project together and I hope to have it road worthy for him to start driving next spring. Main goal is to get it to start, stop and safely roll down the road for now before getting all fancy. I'm thinking a clear coat over the original paint would be pretty sweet though.

Very cool. Had a 67 in blue and white with a 352 and 4 speed that my former father in law gave me. He paid $2700 for it brand new!

Online bigmacc

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Oct 2012
  • Posts: 4576
  • Location: the woods
Re: Who else has a hot rod project? lets see em!
« Reply #201 on: October 30, 2021, 07:45:12 PM »
Awesome, I drove a fire truck red 67 in high school.  Man, do I wish I didn't have to sell it.  Same engine, I got tired of people telling me I was an idiot and it was a 351.

Those trucks sure look good in red. I'm sure a lot of us wish we could go back in time and grab our high school vehicle. For me it was a '71 FJ40. Haha. I've had to explain the 352 motor several times already.
[/quote]

I would love to have my High school rig back, I kick myself everytime I think of it, 48 Willys, had it for years, put in a 327 and sold it for college money. My dad brought it back from Alaska,  it was an old Army surplus rig with an arctic cab they used up there to deliver mail. He brought it down and it turned into a project, wish I still had it, sold it for a fraction of what I could of.  :bash: :bash: Showed a picture of it to someone years ago, he said I was sitting on a gold mine, I sold it along with the original motor that only had 33,009 miles on it for......Way less than I should have :chuckle:, young and dumb :tup:

Offline ASHQUACK

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 744
Re: Who else has a hot rod project? lets see em!
« Reply #202 on: February 08, 2022, 04:45:19 AM »
Looks salvageable  :chuckle:

We did a job in north Seattle in what was a vacant lot next to an auto repair shop. Probably dug about thirty in similar shape out of the ground. They were laying all over and it'd freak me out every time, my first thought was always it had shot out of the machine.

Everything inside that block was salvageable.  Went to the salvage yard. Block is headed to the machine shop for inspection and hopefully the needed work. Number 2 hole is cracked so at a minimum it's getting a sleeve. After the machine shop I'll know more about where I am at.
Time to move this post up again. An update Is needed.
After some down time and a few conversations we (I) decided that simply scrap the block an just start over. Found an unmolested 350 4 bolt main bare block. Purchased it and sent it off to be squared and honed out 10 over. Ordered a new set of Manley pistons and h beam connecting rods. A nice new set of aluminum 202 heads that'll have Manley valves. Pretty much the ou thing from the original motor will.be the crank. Here's a pic of the block after the machine shop did their thing and balanced all the internals. Should pump out around 550-575 ponies after all.is said and done.

Offline Ghost Hunter

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 5148
  • Location: SW <-> NE
  • Groups: NRA Patron Life Member, RMEF Life, Sponser Member
Re: Who else has a hot rod project? lets see em!
« Reply #203 on: February 08, 2022, 06:12:11 AM »
Just finished this project this summer. 1st time on the road after 60 years.

Very cool!
Is it stock? If not I would Rat that bad boy out,  :chuckle:

Looks like a little aftermarket work done to that.  Nice ride.   :tup:
Economy failure = Too many people spending money they don't have on things they don't need to impress people they don't like.

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32690
  • Location: Pacific NorthWest
Re: Who else has a hot rod project? lets see em!
« Reply #204 on: February 08, 2022, 11:56:53 PM »
Looks salvageable  :chuckle:

We did a job in north Seattle in what was a vacant lot next to an auto repair shop. Probably dug about thirty in similar shape out of the ground. They were laying all over and it'd freak me out every time, my first thought was always it had shot out of the machine.

Everything inside that block was salvageable.  Went to the salvage yard. Block is headed to the machine shop for inspection and hopefully the needed work. Number 2 hole is cracked so at a minimum it's getting a sleeve. After the machine shop I'll know more about where I am at.
Time to move this post up again. An update Is needed.
After some down time and a few conversations we (I) decided that simply scrap the block an just start over. Found an unmolested 350 4 bolt main bare block. Purchased it and sent it off to be squared and honed out 10 over. Ordered a new set of Manley pistons and h beam connecting rods. A nice new set of aluminum 202 heads that'll have Manley valves. Pretty much the ou thing from the original motor will.be the crank. Here's a pic of the block after the machine shop did their thing and balanced all the internals. Should pump out around 550-575 ponies after all.is said and done.
:tup:
The things that come to those who wait, may be the things left by those who got there first!

Online Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 860
  • Location: Lynden
Re: Who else has a hot rod project? lets see em!
« Reply #205 on: February 11, 2022, 06:17:01 AM »
My 69 Camaro is coming along - getting close to being ready for paint. Was going to just make it a driver, but turned into a full frame off resto
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline 2MANY

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Jun 2013
  • Posts: 4686
  • Location: Yup
Re: Who else has a hot rod project? lets see em!
« Reply #206 on: February 11, 2022, 08:24:04 AM »

Gonna be nice weather this weekend.




Online Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 860
  • Location: Lynden
Re: Who else has a hot rod project? lets see em!
« Reply #207 on: February 11, 2022, 08:57:36 AM »
My 69 Camaro is coming along - getting close to being ready for paint. Was going to just make it a driver, but turned into a full frame off resto
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Online Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 860
  • Location: Lynden
Re: Who else has a hot rod project? lets see em!
« Reply #208 on: February 11, 2022, 08:58:57 AM »
My 69 Camaro is coming along - getting close to being ready for paint. Was going to just make it a driver, but turned into a full frame off resto
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Online Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 860
  • Location: Lynden
Re: Who else has a hot rod project? lets see em!
« Reply #209 on: February 11, 2022, 09:00:01 AM »
My 69 Camaro is coming along - getting close to being ready for paint. Was going to just make it a driver, but turned into a full frame off resto
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

 


* Advertisement

* Recent Topics

Average by lhrbull
[Today at 07:31:56 AM]


Let’s see your best Washington buck by Pathfinder101
[Today at 07:22:11 AM]


Walked a cougar down by Loup Loup
[Today at 07:16:30 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]


Bearpaw Season - Spring 2024 by duckmen1
[Today at 06:52:09 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]


Long Beach Clamming Tides by Encore 280
[Yesterday at 05:16:00 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal