collapse
GET THE MOST OUT OF YOUR GPS MAP

Author Topic: Foxpro Patriot  (Read 3331 times)

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 2037
  • Location: SULTAN
Re: Foxpro Patriot
« Reply #15 on: November 24, 2017, 01:36:00 PM »
Nice !!! 

Offline Blacktail Sniper

  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Oct 2009
  • Posts: 5141
  • Location: Rochester, Washington
  • Kill'em all...let the gravy sort'em out!!!
Re: Foxpro Patriot
« Reply #16 on: November 24, 2017, 01:45:06 PM »
Nice !!!

Thanks!

I had previously had it all ready to go, or so I thought... :bash:

Went to fire a few rounds after boresighting and it would not eject the empties.  Didn't matter how fast I tried working the bolt.  A little research and I found out that is a common issue with 788's, the ejector throws them at a pretty high angle and causes the shell to get knocked back in by hitting the scope.

Found two "cures" in my research:

1) Rotate the scope a quarter trun to the left... could not get that to look right no matter how hard I tried!!  Yeah, I'm one of those!  :chuckle:

2) Use tall rings.  Got a pair of them installed and now had proper ejection, but then not a comfortable cheek weld...hence the adjustible riser.

I guess the biggest cause of my putting it off was the drilling of the stock, kinda hard to come back from that if ya screw it up!!

But, there it is... 

It is better to be consistently incorrect than inconsistently correct...

Sarcasm: The ability to insult stupid people without them realizing it. 

My level of sarcasm depends on your level of stupidity...

Sarcasm makes smart people laugh and stupid people mad.

Offline sjhgraysage

  • Political Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2009
  • Posts: 143
  • Location: Spokane
Re: Foxpro Patriot
« Reply #17 on: December 08, 2017, 11:18:30 AM »
Cool model 788! What cartridge?  :tup:
I have one in .223 Remington, killed a few coyotes with it over the years. time for a few more I think.

Offline Blacktail Sniper

  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Oct 2009
  • Posts: 5141
  • Location: Rochester, Washington
  • Kill'em all...let the gravy sort'em out!!!
Re: Foxpro Patriot
« Reply #18 on: December 08, 2017, 11:39:19 PM »
Thanks, it is a 1967 model year in .22-250.
It is better to be consistently incorrect than inconsistently correct...

Sarcasm: The ability to insult stupid people without them realizing it. 

My level of sarcasm depends on your level of stupidity...

Sarcasm makes smart people laugh and stupid people mad.

Offline GurrCentral

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2008
  • Posts: 371
  • Groups: GurrCentral
Re: Foxpro Patriot
« Reply #19 on: December 10, 2017, 07:10:28 PM »
Has anyone compared the Foxpro Patriot to the Lucky Duck Rebel? Both 119.99.  The Rebel has a motion decoy attached. Just curious...thanks!

Offline bskredsvig

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: May 2010
  • Posts: 5
Re: Foxpro Patriot
« Reply #20 on: December 15, 2017, 10:22:15 PM »
I too am curious the difference in patriot and rebel. Less sounds in the rebel and can't load additional (it seems). But, rebel can play 2 sounds at once and includes decoy attachment.
I'm likely going to buy myself the rebel tomorrow for my bday, unless someone can lead me a different direction. Just getting into predator hunting so $120 is a lot easier to swallow than $200+.

Offline coop2424

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1440
  • Location: Spirit Lake, ID
Re: Foxpro Patriot
« Reply #21 on: January 03, 2018, 01:49:52 PM »
Any update on the callers?  I see they still have them on sale and thinking about picking one up.

Offline Baranouskas

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Mar 2017
  • Posts: 40
  • Location: Wenatchee
Re: Foxpro Patriot
« Reply #22 on: January 03, 2018, 03:38:44 PM »
Canít go wrong with Foxpro.  But the cheaper models constantly need fresh batteries, a real pain in the butt.  I have the Banshee and I hardly ever have to replace the batteries.  You get what you pay for with E callers

Offline KFhunter

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Jan 2011
  • Posts: 17383
  • Location: The Wedge
  • My posts do not reflect an official opinion of HW
Re: Foxpro Patriot
« Reply #23 on: January 03, 2018, 05:34:05 PM »
I'm still using an older foxpro CS24B from the custom shop, it works good. 

I've upgraded my decoy, I was using a jack in the box but I want a more frantic decoy so I'll be using Icotec PD200.  I like the MOJO spinners but I think their critter 2 went downhill. 
http://icotec.com/pd200-decoy/
Hopefully I picked out a good one, I'll bungie it up in a tree with the call, or spike it in a rotten stump most likely.



Decoy Features:
Works with ICOtec GC320, GC350 and GC500 remote controls
Works with other major brand calls with AUX port for decoy
Unit also runs on auto mode, no call connectivity required
2 quick change prey toppers
LED light for topper illumination
Speed dial control
Quiet motor, no gear noise
Intermittent motion
Connection cable included (3.5mm)
Aluminum stake included (8″ threaded)
Decoy requires 4 AA batteries (1.5 volt), not included
One year factory warranty

Offline KFhunter

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Jan 2011
  • Posts: 17383
  • Location: The Wedge
  • My posts do not reflect an official opinion of HW
Re: Foxpro Patriot
« Reply #24 on: January 07, 2018, 02:44:38 PM »
Ok I'm diggin the new icotec decoy


I can confirm that it does work with with the AUX port on the foxpro.   

I like that I can adjust the spin speed of the decoy topper

there is a slight motor noise, but the flapping of the decoy topper drowns it out I think, it's slight.  It's pretty quiet really, just as quiet as my jack in the box.  I like the flapping noise of the decoy, in fact I think I want to add a plastic strip to enhance the flapping noise with wood pecker sounds when I hang it in a tree....ya  ;)





coulple things I noticed, you'll need a good fingernail or knife to get the flex spring rod out of the decoy motor once you have the plastic bushing/clip in place. 
You can't just yank out the flex spring without removing that bushing, it somehow locks it in place even though the flex spring is magnetic mount, I dunno it won't come out and I didn't want to yank it any harder.  Not a big deal I don't chew my finger nails  :chuckle:

below is a picture of the clip thingie you need to pry off before you remove the decoy rod from the motor part



 

* Recent Topics

Poaching on the Tucannon. by badnewskruse
[Yesterday at 10:54:33 PM]


She has arrived, her name is Pepper! by lokidog
[Yesterday at 10:52:06 PM]


Waterfowl Retriever Training Day - Feb 10th, Monroe, WA by lokidog
[Yesterday at 10:50:36 PM]


Burbot fishing today by lokidog
[Yesterday at 10:43:35 PM]


Pay it Forward by lokidog
[Yesterday at 10:34:23 PM]


Name the Cartridge by j_h_nimrod
[Yesterday at 10:32:56 PM]


Idaho elk hunting near WSU/ palouse zone 8,8A,11A by deerlick
[Yesterday at 10:11:51 PM]


Idaho wolf control board seeks $200,000 to kill wolves by Dan-o
[Yesterday at 10:06:20 PM]


WTS Variety of Cordless Ryobi Tools by Hankbest17
[Yesterday at 10:04:16 PM]


Winter in effect by bassquatch
[Yesterday at 09:53:43 PM]


Chemical Spraying by EmeraldBullet
[Yesterday at 09:31:12 PM]


The KETO thread by KFhunter
[Yesterday at 09:25:57 PM]


Long range bear cal/rifle help needed by mountainman
[Yesterday at 09:22:34 PM]


Need some gear suggestions for 2019 by HikerHunter
[Yesterday at 08:52:31 PM]


Trapping opportunity Gig Harbor area. by cem3434
[Yesterday at 08:50:56 PM]


Hunting coastal estuaries help by 7mmCoug
[Yesterday at 08:47:21 PM]


Norman89 18/19 season by Norman89
[Yesterday at 08:46:47 PM]


Big Jons 2018 - 2019 Trapping Season Nice Kitty by Turner89
[Yesterday at 08:37:45 PM]


Winchester Model 70 EW SS or Kimber Montana by Alchase
[Yesterday at 08:18:46 PM]


Field Day this weekend by TheYoungSelfStarter
[Yesterday at 08:17:18 PM]