collapse

Advertisement


Author Topic: ruger 3 screw 357 mag  (Read 1061 times)

Offline 7mm ed

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: May 2008
  • Posts: 143
  • Location: chehalis
ruger 3 screw 357 mag
« on: January 15, 2018, 12:26:16 PM »
i found old ruger three screw for 350 . it has holster wear and a few sratches . dose not have the transfer bar kit in it . is this a good deal on it ?

Offline Encore 280

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1947
  • Location: Poulsbo
  • Groups: Encore 280
Re: ruger 3 screw 357 mag
« Reply #1 on: January 15, 2018, 12:51:59 PM »
You got screwed big time!!! :chuckle: :chuckle: I think you done really good! :tup: Check with Mudflat Mike. Go online and find out when it was made. I have one that was shipped from the factory in '57 and another that was shipped in the '70s, can't remember what year.

Offline Encore 280

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1947
  • Location: Poulsbo
  • Groups: Encore 280
Re: ruger 3 screw 357 mag
« Reply #2 on: January 15, 2018, 12:58:46 PM »
What barrel length? You can shoot 38spec. through it and if you have the convertible with the cylinder then 9mm also.

Offline 7mm ed

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: May 2008
  • Posts: 143
  • Location: chehalis
Re: ruger 3 screw 357 mag
« Reply #3 on: January 17, 2018, 04:03:13 AM »
I bought the ruger got it for 300.00 and went on the web sight it was made in 1967 it has a 6 1/2 inch barrel .

 


* Advertisement

* Recent Topics

SimplePortal 2.3.7 © 2008-2024, SimplePortal