collapse

Advertisement


Author Topic: Long range for beginners  (Read 60721 times)

Offline CAMPMEAT

  • CAMPMEAT
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 13347
  • Location: ARIZONA, A PLACE WHERE I DON'T WANT YOU LIVING !!
  • I love my gun rights in Arizona..
Re: Long range for beginners
« Reply #15 on: March 14, 2018, 07:44:13 AM »
what I'd like to see is long range shooting without the personal computers or wind meters and doing it by evaluating conditions and range estimation.


We used to do that. Take a look at targets without any rangefinders etc and have to shoot at the distance YOU thought it was. A lot of misses by hardcore shooters.
I couldn't care less about what anybody says..............

Offline Bill W

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1942
  • Location: Moses Lake
  • Groups: NRA, CBA
Re: Long range for beginners
« Reply #16 on: March 14, 2018, 07:49:40 AM »
what I'd like to see is long range shooting without the personal computers or wind meters and doing it by evaluating conditions and range estimation.


We used to do that. Take a look at targets without any rangefinders etc and have to shoot at the distance YOU thought it was. A lot of misses by hardcore shooters.

sorta changes the playing field, doesn't it?

Offline h20hunter

  • Trade Count: (+16)
  • Legend
  • ******
  • Join Date: Jan 2010
  • Posts: 20873
  • Location: Lake Stevens
Re: Long range for beginners
« Reply #17 on: March 14, 2018, 08:02:44 AM »
My plan as a novice that will soon have much longer range capability is to practice both ways. Good thread. Some chatter Id like to see om this topic would be using ffp and sfp scopes, how magnification affects retical hold over, and best practices in the field.  IE, hold over vs dialing and holding dead on.

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6445
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Long range for beginners
« Reply #18 on: March 14, 2018, 08:09:55 AM »
When I first started I had no ballistic calculator or range finder. I didn't reload. Only place I had to shoot was the family farm. I measured my ranges with 100' tape,  I figured out my dope by just walking it out 25-50 yards at a time.
But I also "wasted" a lot of rounds having no clue where I was missing due to heavy vegetation. Couldn't spot my misses. Started using huge targets which helped.

You don't need all the fancy gadgets to get started but I think they will help you practice better.
Sure any time behind the rifle is not wasted but if your not learning from that time it is wasted.

I use a ballistic calc, range finder, and custom loads because it has improved my practice. Learning how to properly use these tools makes even better practice.  I don't need these tools to shoot.  I learned with out them.  I only want them when working with a new load cause once I've learned my dope I don't use them,  But I think if I had these tools and the knowledge to use them when I started I would have learned faster.  I would have had less frustrations.

Practice dose not make perfect. Perfect practice makes perfect. 




Parallax was my second eye opener.  I always thought it was for focus.

What is Parallax?
By Earl Hines, Best of the West Master Gunsmith

When we talk about the accuracy of a shooting system, there is one element that most people know little about, don't understand, don't know how to apply, or don't recognize. Many people have indicated that they understand it but when asked, they give an inaccurate response. What I am referring to is that thing called parallax. What is it? How does it work? How do I adjust it? Is it important? How do I know when it's correct? And where do I start? All important questions. I will try to answer all these and more.

First, what is parallax? Parallax is having both the cross hairs and the target in the same focal plane so that no matter where your eye looks through the rear lens, the cross hairs do not change position on the target. How can that be accomplished? Well, modern scope manufacturers provide us with an adjustment mechanism on the opposite side of the right and left windage adjuster. Older scopes without this adjustable feature were parallaxed at a given distance. Depending on the manufacturer, they would parallax their scope between approximately 75 yards to 150 yards. At normal hunting ranges of the time, maximum of 3 or 4 hundred yards, the small amount of parallax was minimal (but still there).



Let’s look at understanding the concept of parallax. Look at the simple drawing in figure 1. In the center of the scope we have a cross, representing the reticle or cross hair inside your scope. On the left we have the part of the scope you look through, and on the right is our target. This being a simple drawing, we have no internal lenses or way to adjust for anything. If my position on the stock causes me to be absolute centered, then I would see along line “A” through the scope. If, for some reason my position causes me to look through the bottom portion of the scope I would see my cross hair on the upper part of the target, line “B”. That would be exactly opposite if I looked through the top of the scope, my cross hair would appear to be on the bottom of the target, line “C”.



So as you can see, by looking through the scope in different positions the cross hair would appear in different locations on the target. Now to apply this to shooting this simple system on a rifle, you can also see that if you were exactly in the center for 5 shots with a perfect rifle, your group would be acceptable and in the center of the target. Look at figure 2. Same rifle but this time your eye is at the bottom line “B”, and you fired 5 shots, again your group would be acceptable but at the bottom of the target because you would see the cross hair at the top of the target and compensate by moving your rifle cross hairs into the center of the target. Same for position “C”. But if you are not in the same position or on the same line every time, as illustrated in figure 2, your group would be much larger and you would be wondering where your accuracy was. That is why modern scopes have parallax adjustment capabilities.



When correctly adjusted, the internal workings of the scope will be able to focus both the target and cross hairs at the same time (on the same focal plane) without movement no matter where your eye is located. This would be correct parallax. Look at figure 3. Most scopes have this adjustable knob on the left side or your scope. There are numbers, varying anywhere from 25 ft. to the lazy 8, indicating infinity. These are “not” and I repeat “not” exact ranges that you can rely on to be accurate. They are approximations. So now you must focus the rear ocular (the lens that you look through to see the target) so that these numbers are close to the distance you want the parallax to be “free”. The term used when your scope is adjusted free of error or movement.



Start with your brand new scope. Turn the parallax knob to the lazy 8 position. Now go outside, with a clear blue sky preferably, point your scope towards the sky and turn your rear eye piece clockwise until it stops. Next, while looking through your scope, turn the ring counter clockwise. Turn the ring until the cross hair becomes crystal clear. Go slightly past this point and then back to insure that it is at the clearest point. At that point your scope is now adjusted to you and only you. The cross hair, being in focus, has been adjusted for your vision requirements to be correct for you. Now you can mount your scope on your highly accurate rifle and head to your favorite shooting spot and finish adjusting things.

If you are sighting in at 200 yards you need to secure your rifle on a bench using sand bags or a very steady bench rest and adjust your parallax knob to 200 yard setting. Position your rifle so that it is pointing at the center of the target when you let go of it. Now without touching your rifle, position your eye at a point so that you are looking through the very center part of the scope. This would be line “A” in figure 1. Now move your eye, not the rifle, up and down, side to side and 45 degrees in all directions. If the cross hairs move in the opposite direction on the target from your eye position, you are “out” of adjustment. To correct or to verify that you are in adjustment, turn the parallax knob either clockwise or counterclockwise a little. This does not take a great amount of adjustment. The cross hair will stop moving if you were out of parallax, or have greater movement if you were already in correct adjustment. The thing that you are looking for is no movement of the cross hair on the target.

If you have a rifle capable of shooting 1 inch groups at 200 yards, even with the most expensive scope in the world, your group size and consistency cannot be realized until your scope is adjusted for you and you understand parallax and adjust for it. Is parallax important? You bet ya. Your bullets will not go where you want them to until you have perfect parallax.

It is all very simple once you have seen improperly adjusted parallax and a parallax free scope setting. Remember, your rifle can shoot no more accurately than your parallax capabilities.
Just a thought for you. How many rifles have been taken to a gunsmith because the rifle “would not group”? You can bet many rebarrels, bedding jobs and such have been sold or charged for that only need parallax adjustment.
« Last Edit: March 14, 2018, 08:28:30 AM by jasnt »
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline CaNINE

  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jul 2015
  • Posts: 1362
  • Location: Gig Harbor
Re: Long range for beginners
« Reply #19 on: March 14, 2018, 08:50:31 AM »
I've learned a lot from Sam over the years. 

http://panhandleprecision.com/

The lazy do not roast any game, but the diligent feed on the riches of the hunt.

Proverbs 12:27

Offline Netminder01

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jul 2009
  • Posts: 1161
Re: Long range for beginners
« Reply #20 on: March 14, 2018, 08:51:21 AM »
tag

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34514
  • Location: NE Corner
Re: Long range for beginners
« Reply #21 on: March 14, 2018, 08:59:48 AM »

Offline h20hunter

  • Trade Count: (+16)
  • Legend
  • ******
  • Join Date: Jan 2010
  • Posts: 20873
  • Location: Lake Stevens
Re: Long range for beginners
« Reply #22 on: March 14, 2018, 09:02:02 AM »
I've learned a lot from Sam over the years. 

http://panhandleprecision.com/

Recently found him....good vids.

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34514
  • Location: NE Corner
Re: Long range for beginners
« Reply #23 on: March 14, 2018, 09:06:36 AM »
I really like this thread idea  :tup:

Offline N7XW

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2011
  • Posts: 1091
  • Location: Westport, WA
Re: Long range for beginners
« Reply #24 on: March 14, 2018, 09:10:07 AM »
As a long range newbie, I have a question. 

At what range do you typically need to do all these calculations?  I'd like to get into long range hunting and I'm thinking my shots should be limited to 600 yards.  Do I need to go through atmospheric pressure and other calculations/compensation or is drop and wind compensation sufficient for deer hunting at 600 yards?

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8964
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: Long range for beginners
« Reply #25 on: March 14, 2018, 09:31:21 AM »
As a long range newbie, I have a question. 

At what range do you typically need to do all these calculations?  I'd like to get into long range hunting and I'm thinking my shots should be limited to 600 yards.  Do I need to go through atmospheric pressure and other calculations/compensation or is drop and wind compensation sufficient for deer hunting at 600 yards?

If you're setting your equipment at Westport sea level and hunting in high, dry, mountainous areas, it sure wouldn't hurt to make some little adjustments based on altitude and pressure.
Kindly do not attempt to cloud the issue with too many facts.

Offline SilkOnTheDrySide

  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Jun 2011
  • Posts: 1532
  • Location: West Richland
Re: Long range for beginners
« Reply #26 on: March 14, 2018, 09:35:16 AM »
As a long range newbie, I have a question. 

At what range do you typically need to do all these calculations?  I'd like to get into long range hunting and I'm thinking my shots should be limited to 600 yards.  Do I need to go through atmospheric pressure and other calculations/compensation or is drop and wind compensation sufficient for deer hunting at 600 yards?


With a kestrel and a ballistics app on my phone I input all the data at the start of the shoot and you’re done. The only thing that TYPICALLY changes enough to matter is wind. Dope is math. Wind reads are what separates the men from the boys.

But wind is linear.

If you have a 1 MIL dial at 10mph, you’ll have a 1.5 MIL dial at 15 MPH.

Also, I’ve come to the realization that most people (myself included) are terrible at judging wind speed before I saw actual wind speed through a wind meter.

Usually people drastically over estimate wind.


Sent from my iPhone using Tapatalk

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6445
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Long range for beginners
« Reply #27 on: March 14, 2018, 09:36:37 AM »
At <600 preasure won't make a huge difference, not near as much as wind can.  I did a quick run of number with a 30/06 load and 180's. From 27.92-29.92 inHG was only half moa diff.  Problem with your thoughts is thinking that after you've shot 600y enough times that you won't want to shoot farther :chuckle: 
Wind will always be the biggest hurdle for long range.  Drop is the easy part. Learn to read and shoot in the wind well and you can shoot at any range.  Don't stay home when it's windy. Go shoot in the wind and rain. It will teach you far more than fair weather shooting
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8964
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: Long range for beginners
« Reply #28 on: March 14, 2018, 10:01:05 AM »
Wind will always be the biggest hurdle for long range.  Drop is the easy part. Learn to read and shoot in the wind well and you can shoot at any range.  Don't stay home when it's windy. Go shoot in the wind and rain. It will teach you far more than fair weather shooting

Shot a .223 cross canyon last weekend.  Only shot at 220 and later at 400.  Zero wind where I was and very little at the target but considerable wind that was hard to read in the open air between shooter and target.  Lighter bullets sure get thrown around in the wind!
Kindly do not attempt to cloud the issue with too many facts.

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8964
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: Long range for beginners
« Reply #29 on: March 14, 2018, 10:07:02 AM »
Shooting "coyote sized" targets all winter for the past several years has really helped me get to know my weapons better. 

Range time is great but nothing builds your confidence like making it happen in the field and under crappy conditions.  This is particularly true for ranges where the action is typically fast.  That 350-500 yard range where I don't have time to consult dope charts is easily memorable. 
Kindly do not attempt to cloud the issue with too many facts.

 


* Advertisement

* Recent Topics

Let’s see your best Washington buck by Deadeyety
[Today at 05:12:44 PM]


Springer 2024 Columbia River by HntnFsh
[Today at 05:12:42 PM]


Springer Fishing Opportunity 3/29 & 3/30 by Blacklab
[Today at 12:48:56 PM]


Long Beach Clamming Tides by dilleytech
[Today at 12:39:19 PM]


Bearpaw Season - Spring 2024 by bearpaw
[Today at 11:45:41 AM]


Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Average by lhrbull
[Today at 07:31:56 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal