collapse

Advertisement


Author Topic: WARNING: Uncle Mike's nylon holsters are TRASH!!!  (Read 12984 times)

Offline Calvin Rayborn

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2013
  • Posts: 1383
  • Location: Columbia Basin
  • Groups: NRA Life Member, ATA Gold-Card Life Member
Re: WARNING: Uncle Mike's nylon holsters are TRASH!!!
« Reply #75 on: August 12, 2018, 07:17:11 PM »
Aren't the orange logo ones the older models ? Like years ago ?

Yep, looks like the manufacturing processes changed at some point...no unusual corrosion issues noted with these older holsters like Bearpaw’s (commented on page 1).

Offline CAMPMEAT

  • CAMPMEAT
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 13347
  • Location: ARIZONA, A PLACE WHERE I DON'T WANT YOU LIVING !!
  • I love my gun rights in Arizona..
Re: WARNING: Uncle Mike's nylon holsters are TRASH!!!
« Reply #76 on: August 13, 2018, 07:01:21 AM »
Aren't the orange logo ones the older models ? Like years ago ?

Yep, looks like the manufacturing processes changed at some point...no unusual corrosion issues noted with these older holsters like Bearpaw’s (commented on page 1).



Cheaper materials for a bigger profit margins.
I couldn't care less about what anybody says..............

Offline ctwiggs1

  • Non-Hunting Topics
  • Trade Count: (+10)
  • Frontiersman
  • *****
  • Join Date: Mar 2009
  • Posts: 4178
Re: WARNING: Uncle Mike's nylon holsters are TRASH!!!
« Reply #77 on: August 13, 2018, 08:53:46 AM »
Pretty common in manufacturing.  You hit a certain point and realize that the cost to grow capacity is enormous, so you shift gears and send it overseas.  A common problem is that if don't maintain process control while outsourcing, you tend to get "equivalent" product in.  Oftentimes in plastics, I've seen "equivalent" measured in many, many different ways.

Sending product offshore can be very lucrative, but you MUST stay on top of it.

Offline baker5150

  • Past Sponsor
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Feb 2012
  • Posts: 3207
  • Groups: Loser's Lounge - Lifetime Member
Re: WARNING: Uncle Mike's nylon holsters are TRASH!!!
« Reply #78 on: August 13, 2018, 09:25:29 AM »
Off gassing of chemicals can happen for years after a product is applied.

VOC's leach out of carpet for close to a decade after installation, longer if the pad is of cheaper quality.
Indoor paint averages 3 years before fully "Cured" and VOC's are no longer emitted.
All of which are terrible for us to be breathing.

I can see this adhesive causing an issue.
If the safe is dry, as in low humidity, any moisture in the adhesive will evaporate quicker in that environment as the dry air pulls the moisture out.


Offline Calvin Rayborn

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2013
  • Posts: 1383
  • Location: Columbia Basin
  • Groups: NRA Life Member, ATA Gold-Card Life Member
Re: WARNING: Uncle Mike's nylon holsters are TRASH!!!
« Reply #79 on: August 14, 2018, 10:21:13 PM »
Off gassing of chemicals can happen for years after a product is applied.

VOC's leach out of carpet for close to a decade after installation, longer if the pad is of cheaper quality.
Indoor paint averages 3 years before fully "Cured" and VOC's are no longer emitted.
All of which are terrible for us to be breathing.

I can see this adhesive causing an issue.
If the safe is dry, as in low humidity, any moisture in the adhesive will evaporate quicker in that environment as the dry air pulls the moisture out.

Wow, that would make even more sense with the low humidity scenario factored in. Dry storage environment in the driest part of the state out here in the basin.

Offline Calvin Rayborn

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2013
  • Posts: 1383
  • Location: Columbia Basin
  • Groups: NRA Life Member, ATA Gold-Card Life Member
Re: WARNING: Uncle Mike's nylon holsters are TRASH!!!
« Reply #80 on: August 14, 2018, 10:26:22 PM »
Aren't the orange logo ones the older models ? Like years ago ?

Yep, looks like the manufacturing processes changed at some point...no unusual corrosion issues noted with these older holsters like Bearpaw’s (commented on page 1).

Cheaper materials for a bigger profit margins.

No kidding - Found out yesterday that even good ole (formerly) American Stanley thermos bottles are now made in the People's Republic...What is this nation coming to?
« Last Edit: August 14, 2018, 10:32:45 PM by Calvin Rayborn »

Offline ctwiggs1

  • Non-Hunting Topics
  • Trade Count: (+10)
  • Frontiersman
  • *****
  • Join Date: Mar 2009
  • Posts: 4178
Re: WARNING: Uncle Mike's nylon holsters are TRASH!!!
« Reply #81 on: August 15, 2018, 07:01:26 AM »
Manufacturing in China isn’t really the problem.  Nobody wants to spend $100 on a thermos and Chinese labor helps us keep the consumer price low. 

The problem is the companies that aren’t controlling the manufacturing process when they send the work to China.


 


* Advertisement

SimplePortal 2.3.7 © 2008-2024, SimplePortal