collapse

Advertisement


Author Topic: 2014 F150 Fuel Filter Replacement  (Read 1192 times)

Offline elksnout

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1278
  • Location: Washougal, Wash
2014 F150 Fuel Filter Replacement
« on: April 19, 2018, 12:26:27 PM »
Where would I look to relieve the fuel pressure prior to replacing the fuel filter? I have the 5.0.

Thanks
Elksnout
Can't we all just get along?

Online Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+12)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 12051
  • Location: Walla Walla
  • HuntWA Woodblock
Re: 2014 F150 Fuel Filter Replacement
« Reply #1 on: April 19, 2018, 12:29:29 PM »
Fuel System Pressure Release

Pressure release

 1. With the vehicle in NEUTRAL, position it on a hoist.
    Refer to: Jacking and Lifting - Overview See: Vehicle Lifting > Procedures > Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).


 2. NOTE: The Fuel Pump Control Module is located on the frame rail above the fuel tank.

    Disconnect the Fuel Pump Control Module electrical connector.
 3. Start the engine and allow it to idle until it stalls.


 4. After the engine stalls, crank the engine for approximately 5 seconds to make sure the fuel rail pressure has been released.


 5. Turn the ignition switch to the OFF position.


 6. When the fuel system service is complete, reconnect the Fuel Pump Control Module electrical connector.

Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline elksnout

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1278
  • Location: Washougal, Wash
Re: 2014 F150 Fuel Filter Replacement
« Reply #2 on: April 19, 2018, 09:04:31 PM »
Thanks Woodchuck.    :tup:

Elksnout
Can't we all just get along?

 


* Advertisement

* Recent Topics

SimplePortal 2.3.7 © 2008-2024, SimplePortal