collapse

Advertisement


Author Topic: Rifle Beding any good ideas  (Read 2588 times)

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Rifle Beding any good ideas
« on: May 17, 2018, 04:33:45 PM »
Was thinking about useing jb weld for rifle Beding ,
What you guys think.
I rather piss in the wind,then have piss down my back.

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8964
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: Rifle Beding any good ideas
« Reply #1 on: May 17, 2018, 04:39:00 PM »
Works fine.
Kindly do not attempt to cloud the issue with too many facts.

Offline 2labs

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Dec 2012
  • Posts: 2299
  • Location: Graham
Re: Rifle Beding any good ideas
« Reply #2 on: May 17, 2018, 05:29:56 PM »
Wheeler engineering has a nice kit. Everything you need, and directions. Called miles Gilbert bed rock
Dino was robbed
Habitual Rock Poacher
Do these "attack" pants make my ass look big?

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6445
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Rifle Beding any good ideas
« Reply #3 on: May 17, 2018, 05:45:03 PM »
I like devcon metal plastic myself. Job weld will work. Toilet bowl wax has been the best release agent I’ve ever used. Cheap too
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Rifle Beding any good ideas
« Reply #4 on: May 17, 2018, 06:19:07 PM »
90% of bedding pro’s imo are using devcon or marinetex.  The marinetex worked fine for me but you can’t go wrong with the standard - devcon.   

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Rifle Beding any good ideas
« Reply #5 on: May 17, 2018, 06:22:05 PM »
Used jb weld
Snow seal boot wax
With a light coat of rem oil
I will let you know at 9 or 9:30 when I pull it apart I will post pic

I rather piss in the wind,then have piss down my back.

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Rifle Beding any good ideas
« Reply #6 on: May 17, 2018, 06:26:03 PM »
I'm only doing front recoil lug not the whole action.
I rather piss in the wind,then have piss down my back.

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Rifle Beding any good ideas
« Reply #7 on: May 17, 2018, 08:34:06 PM »
JB weld works pretty well if you get your ratios right and mix it well. I'm partial to Devcon but it's pretty expensive if you only have 1 or 2 rifles to bed. I've done 10 or 12 guns with 1# of Devcon.

I've had good luck with Kiwi shoe polish as a release agent combined with some of the kids' clay to fill any voids in the action. I haven't glued a gun yet, but I was a little nervous on one or two of them. :chuckle:

What action are you bedding?

Offline Bill W

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1942
  • Location: Moses Lake
  • Groups: NRA, CBA
Re: Rifle Beding any good ideas
« Reply #8 on: May 17, 2018, 08:50:21 PM »
JB weld works pretty well if you get your ratios right and mix it well. I'm partial to Devcon but it's pretty expensive if you only have 1 or 2 rifles to bed. I've done 10 or 12 guns with 1# of Devcon.

I've had good luck with Kiwi shoe polish as a release agent combined with some of the kids' clay to fill any voids in the action. I haven't glued a gun yet, but I was a little nervous on one or two of them. :chuckle:

What action are you bedding?

I got one I'm going to "bed" with no release agent.  It shot real good until I had to pull the action from the stock.  I found out that the previous owner bedded it with no release agent and I decided when I returned it to the stock I'd do it the same way.  It was about the same as a glue in but also using the action screws.

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Rifle Beding any good ideas
« Reply #9 on: May 17, 2018, 09:41:25 PM »
Here's the pic , not as good looking as I expected,but it did take the slip out,i will clean up with dreamel tomorrow.
This is my first attempt so not good looking,but will work.
Glad I took it apart cause I think it might of been glued if I waited any longer.
I rather piss in the wind,then have piss down my back.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Rifle Beding any good ideas
« Reply #10 on: May 17, 2018, 10:40:16 PM »
Marinetex  or Devcon give a much nicer finish. 

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Rifle Beding any good ideas
« Reply #11 on: May 17, 2018, 10:55:38 PM »
Marinetex  or Devcon give a much nicer finish. 

Ya I think I will try devcon or marintex on my next rifle project. :tup:
I rather piss in the wind,then have piss down my back.

Offline CAMPMEAT

  • CAMPMEAT
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 13347
  • Location: ARIZONA, A PLACE WHERE I DON'T WANT YOU LIVING !!
  • I love my gun rights in Arizona..
Re: Rifle Beding any good ideas
« Reply #12 on: May 18, 2018, 06:58:06 AM »
Put it in a chassis.
I couldn't care less about what anybody says..............

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8964
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: Rifle Beding any good ideas
« Reply #13 on: May 18, 2018, 07:16:40 AM »
With JB, I let it sit overnight and pop it loose after 12-14 hrs, that seems about perfect for the temps in my shop.isn't going to lift or change shape but I can still clean it up with a sharp knife and drill out the hole for the action screws.  All I've bedded is the front/recoil lug but it makes a positive difference. 

For those factory stocks that I notice vertical stringing, sand down the contact points, dremel out the recoil lug area so I get more epoxy in there, then bed it.  Reduced the fliers to almost nil and turned a totally factory 700 into an excellent shooting rifle, same with two Savages and a Ruger.  Some people frown on the finish but I think it looks great when done carefully, plus you can't even see it unless the action is taken out  :tup:
Kindly do not attempt to cloud the issue with too many facts.

Offline jackelope

  • Administrator
  • Trade Count: (+27)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 49015
  • Location: Duvall, WA
  • Groups: jackelope
Re: Rifle Beding any good ideas
« Reply #14 on: May 18, 2018, 07:26:14 AM »
Put it in a chassis.

Not really practical for hunting.
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

 


* Advertisement

* Recent Topics

Springer 2024 Columbia River by Blacklab
[Today at 02:35:54 PM]


Springer Fishing Opportunity 3/29 & 3/30 by Blacklab
[Today at 12:48:56 PM]


Long Beach Clamming Tides by dilleytech
[Today at 12:39:19 PM]


Let’s see your best Washington buck by abhold87
[Today at 12:03:27 PM]


Bearpaw Season - Spring 2024 by bearpaw
[Today at 11:45:41 AM]


Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Average by lhrbull
[Today at 07:31:56 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal