collapse

Advertisement


Author Topic: cva accura  (Read 277 times)

Offline oldschool

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 275
cva accura
« on: November 08, 2018, 10:27:57 AM »
 New accura loads easy first shot.But on second sabot comes up 2 inches short of full seating.Extremely hard to seat final 2 inches.I have a cva elkhorn with probably 300 rounds down pipe bergarra barrel. No problems100 grains loose and 250 grain hornnady.

Offline andersonjk4

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2010
  • Posts: 885
  • Location: Spangle, WA
Re: cva accura
« Reply #1 on: November 08, 2018, 10:48:47 AM »
What powder are you using?  What caps or primers are you using?  I have an Accura as well and noticed a definite "crud" ring that forms with Triple 7 and musket caps.  Not that bad after only 1 shot, but if you don't get the crud ring out it can build up over many shots and I could see it causing loading issues.  I shoot Hornady 250 gr SSTs in my Accura and don't have loading issues until about shot 4 or 5 without running a patch down between shots. 

Offline flyfishWA

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2018
  • Posts: 210
  • Location: Yacolt
Re: cva accura
« Reply #2 on: November 08, 2018, 08:51:38 PM »
You would probably get more advice in the muzzleoader section? :dunno: I usually run a cleaning patch down inbetween shots with my cva wolf shooting basically the same load and that works good.
"speak softly and carry a big stick" Theodore Roosevelt

Offline oldschool

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 275
Re: cva accura
« Reply #3 on: November 09, 2018, 08:27:34 AM »
 I'm using triple 7 powder with 209 primmers and hornady 250s

Offline Reidus

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 736
  • Location: Tri-Cities
Re: cva accura
« Reply #4 on: November 09, 2018, 08:41:39 AM »
Google Triple 7 crud ring. It builds up a ring of crud and prevents your bullet from seating all the way. Not sure how to fix this other than trying different powder. Could swab between shots. Some people say they have a problem with it and others say they don't.

Offline oldschool

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 275
Re: cva accura
« Reply #5 on: November 09, 2018, 11:58:29 AM »
 Thx for help.

 


* Advertisement

* Recent Topics

Activity by bigdave
[Today at 08:36:22 AM]


2019 Turkeys: Post them here by MerriamMagician
[Today at 08:34:53 AM]


Charcuterie by Angry Perch
[Today at 08:32:32 AM]


3-1/2Ē + bad shoulder by Henrydog
[Today at 08:28:24 AM]


Maven Optics by chiwawadan
[Today at 08:16:18 AM]


18' Fiberform & 115 outboard by CLARKTAR
[Today at 08:07:35 AM]


FS 2000 suburban by Stein
[Today at 08:00:55 AM]


Sneak peak at the 27 Boondoggle by jasnt
[Today at 07:48:29 AM]


McCall, Weiser units? by kball4
[Today at 07:31:36 AM]


2019 sheds: post them here! by Old Man Yager
[Today at 07:26:41 AM]


Am I shooting the correct arrow? by OltHunter
[Today at 07:22:59 AM]


May 1 st announcement for wolf relocation program in Washington by Special T
[Today at 07:13:08 AM]


Turkey hunting in Colville and places to eat. by EWUeagles
[Today at 07:12:46 AM]


Green dot map question by hunterofelk
[Today at 07:04:27 AM]


Thinking about going muzzle loader for elk by Reidus
[Today at 06:54:41 AM]


Jet Sled Manufacturers? by Parasite
[Today at 06:54:31 AM]


FS cutting edge maximus 375 300gr bullets by birddogdad
[Today at 06:34:45 AM]


F/S: Three non-working tractor sprinklers by Zuus
[Today at 05:48:02 AM]


Arsenal SLR107-61 by kukusya
[Today at 05:43:49 AM]


Letís see your 2019 hunting bow.... by Skyvalhunter
[Today at 05:29:30 AM]