collapse

Advertisement


Author Topic: Replacing CV boots  (Read 2903 times)

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Replacing CV boots
« on: March 03, 2019, 03:49:34 PM »
I've got a torn CV boot on the right front corner of of my '05 Silverado 2500, and I'm trying to decide if there's any reason I shouldn't just replace the CV axles while I've got it torn apart. I don't have any reason to believe that the axles are worn or really need to be replaced other than I've got 145,000 miles on the truck and it probably wouldn't hurt to just replace them. Then I got to thinking that I should probably just do the bearings while I've got it torn apart that much. I'm finding myself quickly falling into the pit of "while I'm in there....." and soon I'll be redoing the whole front end just because I had a torn CV boot. :chuckle:

Any thoughts on other stuff I should just tear into while I'm in there? Or would you all just leave everything alone and only fix what's broken, the torn CV boot?

Offline MtnMuley

  • Site Sponsor
  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Aug 2009
  • Posts: 8635
  • Location: NCW
Re: Replacing CV boots
« Reply #1 on: March 03, 2019, 03:58:58 PM »
I personally would replace the CV axles while I had it tore apart.  :twocents:

Online JimmyHoffa

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 14351
  • Location: 150 Years Too Late
Re: Replacing CV boots
« Reply #2 on: March 03, 2019, 04:04:00 PM »
Easier and faster to just swap the CV axle.  It's something like 8 bolts on one end (need a torque wrench) and a big nut on the other, then it slides out.  The socket might be kind of a special size.  But you have to do all that anyways to replace the boot.  Some stores give you trade in credit if you bring them the old one after you've done the swap.

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12521
  • Location: Arlington
Re: Replacing CV boots
« Reply #3 on: March 03, 2019, 06:40:57 PM »
I would always do the entire axle, unless it was some freak think like you ran over a branch with 100 miles on a new truck and tore the boot and know there isn't dirt, mud, rocks or other stuff in the grease.

Offline jackelope

  • Administrator
  • Trade Count: (+27)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 49015
  • Location: Duvall, WA
  • Groups: jackelope
Re: Replacing CV boots
« Reply #4 on: March 03, 2019, 06:54:45 PM »
Do the axles. Pretty much nobody does just CV boots anymore.
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Replacing CV boots
« Reply #5 on: March 03, 2019, 07:07:28 PM »
Sound's like everybody's on the same page. I had a few guys suggest that I do just the boot to save a couple bucks, but it just seems pointless if I have to tear the whole axle off anyways. Besides, the complete axles are only about $70 each.

Offline syoungs

  • Political & Covid-19 Topics
  • Trade Count: (+8)
  • Sourdough
  • *****
  • Join Date: Aug 2012
  • Posts: 2201
  • Location: tri cities, WA
Re: Replacing CV boots
« Reply #6 on: March 03, 2019, 07:12:57 PM »
Only time I'll do a cv boot vs an axle is if I tear the boot myself while in the shop, which honestly only happens to me on quads now a days lol.

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 5552
  • Location: Toledo
Re: Replacing CV boots
« Reply #7 on: March 03, 2019, 07:20:21 PM »
Done my fair share of boots. Never again with the price of axles so cheap. Much easier to replace the axle.

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12521
  • Location: Arlington
Re: Replacing CV boots
« Reply #8 on: March 03, 2019, 07:26:34 PM »
Sound's like everybody's on the same page. I had a few guys suggest that I do just the boot to save a couple bucks, but it just seems pointless if I have to tear the whole axle off anyways. Besides, the complete axles are only about $70 each.

Good grief, how many times over the next few decades would you be second guessing that choice?  If for no other reason, I would be glad to know I had a new part there.  I hate running down the interstate wondering if I made the right choice.  On top of that, I sometimes do stuff just to teach the kids how things work and get them involved (that doesn't apply to everyone).

Offline thinkingman

  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 2364
Re: Replacing CV boots
« Reply #9 on: March 07, 2019, 04:51:33 PM »
Another for replacing axles, not boots.
I replaced the halfshaft on my VW myself. It required two specialty tools and a new axle bolt(torque to yield bolts-do not reuse!).  In total, it might have taken an hour and it was my first time doing it.
The only ‘fun’ part was obtaining the final torque value. 
200Nm plus 180 degrees meant a two foot breaker bar with my jack handle extension and my feet off the floor.
I earned that beer.
“The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser men so full of doubts.”
― Bertrand Russell

Offline Iveexcaped3

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Longhunter
  • *****
  • Join Date: Mar 2019
  • Posts: 671
  • Location: Yakima,WA
    • Riverside Construction, LLC
Re: Replacing CV boots
« Reply #10 on: March 07, 2019, 05:15:08 PM »
They do make a split cv boot so you can do it in 5 minutes.... just saying.... I’ve done that while I’m there to many times and it ends up costing way more than you think. Same time I’ve learned to put factory parts back on, not the autozone Napa crap

Offline thinkingman

  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 2364
Re: Replacing CV boots
« Reply #11 on: March 08, 2019, 12:19:01 PM »
Another for replacing axles, not boots.
I replaced the halfshaft on my VW myself. It required two specialty tools and a new axle bolt(torque to yield bolts-do not reuse!).  In total, it might have taken an hour and it was my first time doing it.
The only ‘fun’ part was obtaining the final torque value. 
200Nm plus 180 degrees meant a two foot breaker bar with my jack handle extension and my feet off the floor.
I earned that beer.
“The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser men so full of doubts.”
― Bertrand Russell

Offline highside74

  • Political & Covid-19 Topics
  • Trade Count: (+11)
  • Frontiersman
  • *****
  • Join Date: Oct 2009
  • Posts: 4484
  • Location: Eatonville wa
Re: Replacing CV boots
« Reply #12 on: March 08, 2019, 01:10:37 PM »
Do the axles. Pretty much nobody does just CV boots anymore.

 :yeah: you won't find a shop out there that just does boots anymore and there is a reason. You can get a brand new CV axle for less than $80. If you are doing it yourself just go get a new one and call it a day.

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 5552
  • Location: Toledo
Re: Replacing CV boots
« Reply #13 on: March 09, 2019, 07:27:52 AM »
They do make a split cv boot so you can do it in 5 minutes.... just saying.... I’ve done that while I’m there to many times and it ends up costing way more than you think. Same time I’ve learned to put factory parts back on, not the autozone Napa crap

Tried the split boot once. Not fun trying to line up the 2 sides with all the pleats. Got more of the glue on my hands than the boot. Tore the boot back off and went and bought an axle.

Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8928
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: Replacing CV boots
« Reply #14 on: March 09, 2019, 10:06:58 AM »
Replace the axles, you know if you just replace the boot your axle is going to fail on opening day this year  :chuckle:
Official hunt-wa bigfoot field researcher!

 


* Advertisement

* Recent Topics

Springer Fishing Opportunity 3/29 & 3/30 by xXLojackXx
[Today at 10:13:39 AM]


Bearpaw Season - Spring 2024 by Machias
[Today at 09:19:44 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Walked a cougar down by 2MANY
[Today at 08:56:26 AM]


Springer 2024 Columbia River by WSU
[Today at 08:31:10 AM]


Average by lhrbull
[Today at 07:31:56 AM]


Let’s see your best Washington buck by Pathfinder101
[Today at 07:22:11 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal