collapse

Advertisement


Author Topic: Propane forge  (Read 1886 times)

Offline fast60eddie

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2010
  • Posts: 430
Propane forge
« on: March 30, 2019, 11:37:02 PM »
Okay so I almost have a good setup. Just need to figure out the air and fuel mixture. I can get it to around 18 to 1900 degrees I hope to see at least 2150. I put 2” of Cerafelt 2 coats of satanite and bricks on the bottom. It sure eats the propane though. I think I am going to find old bbq or steel table to modify so I can close the door with bricks.

Offline gramps

  • Non-Hunting Topics
  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Dec 2007
  • Posts: 788
  • Location: Wahkpa Chu'gn
Re: Propane forge
« Reply #1 on: March 31, 2019, 06:04:13 AM »
Good Job.
Any details on the burner build and the two propane hoses?  What is the pressure on the regulator in the photo?
Thanks
It never changes, but it is always different.

Offline fast60eddie

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2010
  • Posts: 430
Re: Propane forge
« Reply #2 on: March 31, 2019, 08:14:12 AM »
I don’t know much about the burner. I picked this stuff up at a garage sale. I had to find stuff to insulate it and put it together. The red hose is air from a compressor, Black is propane. I think the pressure gauge is on the wrong side I am going to try moving it up by the burner. In the pile I purchased was theses scary tubes that I have not used. If I can’t get a high temperature I might try one l just don’t understand what their purpose is. The pictures might help. I don’t know what size hole is up inside the burner.

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6445
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Propane forge
« Reply #3 on: July 14, 2019, 09:17:21 AM »
Flame looks good but 10 psi is a bit low in my experience.  Get an adjustable regulator you can get to 20psi. Get some fire bricks to close up the front some.  Should be able to get 2600

Bright dragons breath is due to forge welding. Borax makes for a very yellow flame
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

 


* Advertisement

* Recent Topics

Let’s see your best Washington buck by high_hunter
[Yesterday at 10:31:08 PM]


Bearpaw Season - Spring 2024 by actionshooter
[Yesterday at 09:43:51 PM]


Walked a cougar down by MADMAX
[Yesterday at 08:31:53 PM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]


Long Beach Clamming Tides by Encore 280
[Yesterday at 05:16:00 PM]


WTS Suppressors I Can Get by dreadi
[Yesterday at 03:30:33 PM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by Longfield1
[Yesterday at 03:27:51 PM]


Straight on by kentrek
[Yesterday at 03:04:53 PM]


2024-2026 Hunting Season Proposals by trophyhunt
[Yesterday at 01:51:40 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal