collapse

Advertisement


Author Topic: Quick review: Silencerco Harvester 300  (Read 876 times)

Offline h20hunter

  • Global Moderator
  • Trade Count: (+13)
  • Legend
  • *****
  • Join Date: Jan 2010
  • Posts: 20108
  • Location: Lake Stevens
Quick review: Silencerco Harvester 300
« on: October 19, 2019, 03:09:38 PM »
Got it after a 10 month wait. Cost was $600 plus the stamp. Very light can and will work from 22 up to 300 wm. Not full ato rated so gotta watch temps. Various thread adapters available for different threads. Easy as can be. Only tried it on the 25 06 Kimber as that is one of two Kimbers I have with the same thread pitch. 6.5 man bun is number two. Sound suppression is very good and recoil further reduced. I shot a few without any ear protection and yes it's still kinda loud but nowhere near without it or especially nowhere near it with the break on. Regarding Silencerco as a company they were great to deal with. I screwed up and used the wrong zip on my thread adapter order and it got sent back to them. Once there they turned it around next day air at no charge even though it was totally my screw up.

First group had a point of impact shift 10 inches low but group stayed nice and tight. 100 yards,  115 gr berger, 25-06.

Offline Pnwrider

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Aug 2014
  • Posts: 516
  • Location: Renton
Re: Quick review: Silencerco Harvester 300
« Reply #1 on: October 19, 2019, 09:40:34 PM »
Does that one break down?

Offline fowl smacker

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2013
  • Posts: 1226
  • Location: Castle Rock
  • Groups: DU, Delta Waterfowl, RMEF, Friends of the Cowlitz
Re: Quick review: Silencerco Harvester 300
« Reply #2 on: October 19, 2019, 11:04:38 PM »
Still waiting on my Silencerco Omega 300 to get out of jail, been 9 months now.

Offline Bango skank

  • Political Topics
  • Trade Count: (+9)
  • Old Salt
  • ******
  • Join Date: May 2014
  • Posts: 5876
  • Location: colville
Re: Quick review: Silencerco Harvester 300
« Reply #3 on: October 20, 2019, 12:50:34 AM »
Should be getting the call to go get my .22wmr suppressor any time now.  And im about to start the proccess to get one for a .45-70, should have that one in time for 2021 spring bear season.

Offline h20hunter

  • Global Moderator
  • Trade Count: (+13)
  • Legend
  • *****
  • Join Date: Jan 2010
  • Posts: 20108
  • Location: Lake Stevens
Re: Quick review: Silencerco Harvester 300
« Reply #4 on: October 21, 2019, 08:06:09 AM »
@Pnwrider  Not fully sure what you mean. Break down as in disassembly? Not that I know of but no reason to do so. I'll be toting it this weekend and knowing that if i get a shot I won't get my bell rung from the noise is very comforting.

Offline Angry Perch

  • Past Sponsor
  • Trade Count: (+5)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 4700
  • Location: Sammamish
Re: Quick review: Silencerco Harvester 300
« Reply #5 on: October 21, 2019, 08:53:15 AM »
Got it after a 10 month wait. Cost was $600 plus the stamp. Very light can and will work from 22 up to 300 wm. Not full ato rated so gotta watch temps. Various thread adapters available for different threads. Easy as can be. Only tried it on the 25 06 Kimber as that is one of two Kimbers I have with the same thread pitch. 6.5 man bun is number two. Sound suppression is very good and recoil further reduced. I shot a few without any ear protection and yes it's still kinda loud but nowhere near without it or especially nowhere near it with the break on. Regarding Silencerco as a company they were great to deal with. I screwed up and used the wrong zip on my thread adapter order and it got sent back to them. Once there they turned it around next day air at no charge even though it was totally my screw up.

First group had a point of impact shift 10 inches low but group stayed nice and tight. 100 yards,  115 gr berger, 25-06.

Ten inches?!

Offline h20hunter

  • Global Moderator
  • Trade Count: (+13)
  • Legend
  • *****
  • Join Date: Jan 2010
  • Posts: 20108
  • Location: Lake Stevens
Re: Quick review: Silencerco Harvester 300
« Reply #6 on: October 21, 2019, 08:56:51 AM »
Yup.. .moved impact point pretty far.  Have not tested other guns but this one is a very light profile barell....add 10 ounces and length and I'm not suprised.

 


* Advertisement

* Recent Topics

Chainsaws chainsaws chainsaws by WRENCHMAN
[Yesterday at 11:40:49 PM]


Multi season draw results by carpsniperg2
[Yesterday at 11:18:50 PM]


Small vs. Large Munsterlander by munsterlander
[Yesterday at 10:55:01 PM]


F/S Black Gold Ascent Verdict Assault. 5-pin Custom built With Blind man's light by BLDtraLR
[Yesterday at 10:30:06 PM]


JOBS: Looking for work/Looking to hire by JTB
[Yesterday at 10:04:58 PM]


2021 Turkeys!!! Let see those birds. by Mulie87
[Yesterday at 09:53:25 PM]


SWFA rifle scope (price drop) by craigapphunt
[Yesterday at 09:41:29 PM]


WTS bullets by swanderek
[Yesterday at 09:38:51 PM]


Trade/Co-op reloading stuff by hunter399
[Yesterday at 09:38:05 PM]


Wts wtt brand new in box razor Gen ll 4x27x56 riflescope by wrchinook
[Yesterday at 09:05:35 PM]


Finding hoof rot dead elk shed hunting by High Climber
[Yesterday at 08:50:26 PM]


Alaska North Slope ( Please comment) by fishngamereaper
[Yesterday at 08:33:36 PM]


Swakane by scoutdog346
[Yesterday at 08:31:27 PM]


Galliformes of the world by Birdguy
[Yesterday at 08:20:06 PM]


Powder for primers by bugs n bones
[Yesterday at 08:17:58 PM]


WTT/ Rl26 for cci200 by big wood
[Yesterday at 08:12:27 PM]


For sale 2014 Harley Ultra limited by MADMAX
[Yesterday at 07:28:19 PM]


Buffalo Bore 9mm outdoorsman by jdb
[Yesterday at 06:54:27 PM]


Montana results??? by gasman
[Yesterday at 06:48:46 PM]


Letís see your throwback pictures by Buck Rub Jr
[Yesterday at 05:49:06 PM]