collapse

Advertisement


Author Topic: Jasonís 338-375 Ruger Build  (Read 5619 times)

Offline Jason

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3203
  • Location: Camas
Re: Jasonís 338-375 Ruger Build
« Reply #75 on: March 27, 2020, 09:25:16 PM »
The little shop down in Cinebar has had a LOT of H4350 lately. I picked up a keg 2 weeks ago for a buddy, sent another guy in there to pick up a keg, then I went back by there and picked up a case (10) of 1 pounders last weekend for myself and any local folks who might need some down the road. I still have half a keg that I picked up a while back as well.

If you're every down around Hwy 12 outside of Mossyrock/Morton, check in with Firemasters Firearms and see what he's got for powder on hand. It's amazing what he'll have and how much he'll have sometimes!
Iíll call down there tomorrow.

Offline yorketransport

  • Business Sponsor
  • Trade Count: (+5)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3232
  • Location: Yelm
  • I'm sorry, it's my fault I'll try harder next time
    • https://www.facebook.com/scapegoatenterprises/
    • Scapegoat Enterprises
Re: Jasonís 338-375 Ruger Build
« Reply #76 on: March 27, 2020, 09:31:08 PM »
The little shop down in Cinebar has had a LOT of H4350 lately. I picked up a keg 2 weeks ago for a buddy, sent another guy in there to pick up a keg, then I went back by there and picked up a case (10) of 1 pounders last weekend for myself and any local folks who might need some down the road. I still have half a keg that I picked up a while back as well.

If you're every down around Hwy 12 outside of Mossyrock/Morton, check in with Firemasters Firearms and see what he's got for powder on hand. It's amazing what he'll have and how much he'll have sometimes!
Iíll call down there tomorrow.

It would be a pretty good run for you from down where you're at, but might be worth it. If nothing else, Ken is a great and he's got a lot of very cool guns in there at great prices. You'd probably end up leaving with powder and a couple guns. :chuckle:
Scapegoat Enterprises Custom Shirts and Decals

Offline Jason

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3203
  • Location: Camas
Re: Jasonís 338-375 Ruger Build
« Reply #77 on: March 28, 2020, 06:38:53 AM »
The little shop down in Cinebar has had a LOT of H4350 lately. I picked up a keg 2 weeks ago for a buddy, sent another guy in there to pick up a keg, then I went back by there and picked up a case (10) of 1 pounders last weekend for myself and any local folks who might need some down the road. I still have half a keg that I picked up a while back as well.

If you're every down around Hwy 12 outside of Mossyrock/Morton, check in with Firemasters Firearms and see what he's got for powder on hand. It's amazing what he'll have and how much he'll have sometimes!
Iíll call down there tomorrow.

It would be a pretty good run for you from down where you're at, but might be worth it. If nothing else, Ken is a great and he's got a lot of very cool guns in there at great prices. You'd probably end up leaving with powder and a couple guns. :chuckle:
I love to drive. Plus it gets me out of the house. Social distancing practices in full effect.

Offline Jason

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3203
  • Location: Camas
Re: Jasonís 338-375 Ruger Build
« Reply #78 on: March 28, 2020, 06:28:34 PM »
Out with the old in with the new primers.

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 3925
Re: Jasonís 338-375 Ruger Build
« Reply #79 on: March 28, 2020, 07:24:46 PM »
I was getting hangfires till I switched from CCI to the 215ís.  Was scary like blackpowder. 

Offline Jason

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3203
  • Location: Camas
Re: Jasonís 338-375 Ruger Build
« Reply #80 on: March 28, 2020, 09:42:22 PM »
I was getting hangfires till I switched from CCI to the 215ís.  Was scary like blackpowder.
Glad they worked out for you. Iím hoping these tighten up my speeds. I was getting the occasional speed drop or spike before and now Iím thinking it was the primers throwing inconsistent charges.

Offline jasnt

  • Predator hunter
  • Political Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 5873
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Jasonís 338-375 Ruger Build
« Reply #81 on: April 05, 2020, 07:44:32 AM »
Have you gotten her dialed in yet?
243Round ct. 107
338rc 773
338 lapua rc 200
37XC rc 213
2020 Rifle rc 337

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Jason

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3203
  • Location: Camas
Re: Jasonís 338-375 Ruger Build
« Reply #82 on: April 05, 2020, 07:54:54 AM »
Have you gotten her dialed in yet?
We will find out today. I got all the primers swapped out for the federal gm215m.
I picked up 4 more pounds of H4350 yesterday and I have some more projectiles coming. As long as we arenít in full canít go anywhere lockdown then I should be able to throw some lead for the next couple weekends.

Iím thinking of loading some up with H1000. What was your powder charge range on yours?

Offline jasnt

  • Predator hunter
  • Political Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 5873
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Jasonís 338-375 Ruger Build
« Reply #83 on: April 05, 2020, 09:47:44 AM »
With the 250gr Bergerís I started with 78gr h1000 and hit pressure at 85gr.  Keep in mind I have about 4-5% more capacity than the standard 338/375R. 
243Round ct. 107
338rc 773
338 lapua rc 200
37XC rc 213
2020 Rifle rc 337

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline Goshawk

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 370
  • Location: Lewis County
Re: Jasonís 338-375 Ruger Build
« Reply #84 on: April 05, 2020, 07:00:01 PM »
The little shop down in Cinebar has had a LOT of H4350 lately. I picked up a keg 2 weeks ago for a buddy, sent another guy in there to pick up a keg, then I went back by there and picked up a case (10) of 1 pounders last weekend for myself and any local folks who might need some down the road. I still have half a keg that I picked up a while back as well.  If you're every down around Hwy 12 outside of Mossyrock/Morton, check in with Firemasters Firearms and see what he's got for powder on hand. It's amazing what he'll have and how much he'll have sometimes!

Never, ever does any price gouging either.  Back when there was a hording of 22lr he kept bricks, one per customer at the same price as always.  A pretty good shop for chambering and gunsmithing too.

Offline Jason

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3203
  • Location: Camas
Re: Jasonís 338-375 Ruger Build
« Reply #85 on: April 08, 2020, 02:47:38 PM »
With the 250gr Bergerís I started with 78gr h1000 and hit pressure at 85gr.  Keep in mind I have about 4-5% more capacity than the standard 338/375R.
Thanks for the info. I have your case capacity memorized..lol

Offline Jason

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3203
  • Location: Camas
Re: Jasonís 338-375 Ruger Build
« Reply #86 on: April 08, 2020, 06:12:37 PM »
I was able to get some shooting in last weekend. I am happy to report that all my primers went bang. Iím finally getting some nice solid groups with the Bergerís now that Iím seating them to the lands.

Offline jasnt

  • Predator hunter
  • Political Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 5873
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Jasonís 338-375 Ruger Build
« Reply #87 on: April 08, 2020, 06:21:58 PM »
Thatís good to hear
243Round ct. 107
338rc 773
338 lapua rc 200
37XC rc 213
2020 Rifle rc 337

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

 


* Advertisement

* Recent Topics

Olympic National Park Goat Hunt Group Anyone? by Buckjunkie
[Today at 06:43:15 AM]


Pheasant Hunting with Tom Brokaw by bearpaw
[Today at 06:41:00 AM]


Kodiak Canvas flex bow by C-Money
[Today at 06:28:56 AM]


Trumps EPA says NO to Pebble Mine by nwmein199
[Today at 06:27:42 AM]


WTB: Retumbo by SilkOnTheDrySide
[Today at 06:08:51 AM]


WTB Polaris General by MHWASH
[Today at 06:02:02 AM]


WTB Remington 870 EM by TooTallMike
[Today at 02:16:00 AM]


FS New in Box Westin HDX brushguard for RAM 1500 09 or newer by BullMagnet76
[Yesterday at 11:15:37 PM]


Halibut fishing Area 7 by lokidog
[Yesterday at 10:43:43 PM]


WTB manual 4x4 truck/SUV by quackkiller
[Yesterday at 10:37:51 PM]


Nighttime kokes by Utah
[Yesterday at 10:33:24 PM]


Idaho deer elk antelope draw by Jimmy33
[Yesterday at 10:11:14 PM]


WTS Stainless Encore prohunter fluted 45-70 barrel by wrchinook
[Yesterday at 10:05:15 PM]


Kokanee! by Alchase
[Yesterday at 09:51:21 PM]


Share your 'Post-Ban' fish catches here! by Alchase
[Yesterday at 09:23:47 PM]


FS fire pit by teanawayslayer
[Yesterday at 09:11:04 PM]


Found lost phone Blue Mountains by sanctuary
[Yesterday at 09:06:31 PM]


Okanogon County camping by actionshooter
[Yesterday at 07:18:15 PM]


LH 338WM/7mm Rum by bustedoldman
[Yesterday at 07:14:46 PM]


WY - Applying? by bolsen
[Yesterday at 06:26:34 PM]