collapse

Advertisement


Author Topic: Fleshing.... how to, knives,etc  (Read 1319 times)

Offline Uncle Juju

  • WA State Trappers Association
  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Nov 2018
  • Posts: 11
  • Location: Bremerton
Fleshing.... how to, knives,etc
« on: November 18, 2019, 05:50:03 PM »
So I just fleshed and boarded 2 raccoons last night.... I totally feel like I did it all wrong!  :dunno:
The hides still appear to have grease on them and a super thin layer of red meat in places. I got off everything I could. There are some spots where it is super clean but there are black spots... hair follicles I believe.
I am using a cheap fleshing knife that I got in the kit from F&T..... It is super dull!

I will be at the Trapping Class with my buddy so who ever is doing the demo will be getting a lot of questions. But I figured other a eine the same boat.

Thanks for any advice.
Every day is a new day to prove how awesome you are!

The impossible just takes a little longer!

Offline Humptulips

  • Global Moderator
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: May 2010
  • Posts: 6132
  • Location: Humptulips
    • Washington State Trappers Association
  • Groups: WSTA, NTA, FTA, OTA, WWC, WFW, NRA
Re: Fleshing.... how to, knives,etc
« Reply #1 on: November 18, 2019, 05:58:52 PM »
So I just fleshed and boarded 2 raccoons last night.... I totally feel like I did it all wrong!  :dunno:
The hides still appear to have grease on them and a super thin layer of red meat in places. I got off everything I could. There are some spots where it is super clean but there are black spots... hair follicles I believe.
I am using a cheap fleshing knife that I got in the kit from F&T..... It is super dull!

I will be at the Trapping Class with my buddy so who ever is doing the demo will be getting a lot of questions. But I figured other a eine the same boat.

Thanks for any advice.

That would be me.
Big coon or small? Big coon I usually use something sharp on the back of the neck. A dull knife should work for the rest though.
I have some coons to flesh so I'll be prepared.
Bruce Vandervort

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4611
Re: Fleshing.... how to, knives,etc
« Reply #2 on: November 18, 2019, 05:59:19 PM »
Been a long time since I was fleshing them - they are greasy but I never got docked on $ for it.  Once the skin starts hardening up you can take the big stuff off. 

Offline lewy

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Dec 2008
  • Posts: 2813
  • Location: buckley
  • IBEW RMEF WSTA WCO NRA
Re: Fleshing.... how to, knives,etc
« Reply #3 on: November 18, 2019, 06:05:19 PM »
Get yourself a good fleshing knife itís worth it, learning to flesh and put up fur is a challenge and takes practice, keep after it :twocents:
Go hawks

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 2999
  • Location: Wet side
Re: Fleshing.... how to, knives,etc
« Reply #4 on: November 18, 2019, 06:16:14 PM »
Post fleshing knives are the best IMO and his skinning knives too
Coons are good for practicing

Offline lewy

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Dec 2008
  • Posts: 2813
  • Location: buckley
  • IBEW RMEF WSTA WCO NRA
Re: Fleshing.... how to, knives,etc
« Reply #5 on: November 18, 2019, 06:27:40 PM »
 :yeah:  I ordered one up after a recommendation from Jake and am very pleased with it
Go hawks

Offline Uncle Juju

  • WA State Trappers Association
  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Nov 2018
  • Posts: 11
  • Location: Bremerton
Re: Fleshing.... how to, knives,etc
« Reply #6 on: November 18, 2019, 08:30:28 PM »
I know there is a lot of opinion..... but would you run a sharp knife or dull? :dunno:
Raccoons aren't worth much but like ya said good practice, really don't want to screw up my first cat or coyote!
Every day is a new day to prove how awesome you are!

The impossible just takes a little longer!

Offline Turner89

  • WA State Trappers Association
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2011
  • Posts: 3127
  • Location: Startup, Wa
Re: Fleshing.... how to, knives,etc
« Reply #7 on: November 18, 2019, 08:46:25 PM »
Unfortunately your going to have some damaged furs while your learning. That's just how it is. Every time you put a pelt up you will get better.
  If you get some cats and coyotes either get someone to help you out or out them in the freezer until you get more confidence.
" if your a 20 year old and not a liberal, you don't have a heart. If your a 40 year old and not a conservative,  you don't have a brain"

Offline Carp Commander

  • WA State Trappers Association
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2012
  • Posts: 533
  • Location: Tri-Cities, WA
  • Groups: Washington Bowfishing Association
Re: Fleshing.... how to, knives,etc
« Reply #8 on: November 19, 2019, 06:58:46 AM »
I use a heavier fleshing knife for coon. Start with a sharp side, below the ears. Unless it is an old boar you should be push (dull knife) from mid neck to finish. Cold fat is much easier to deal with. All my coons go to the freezer just long enough to get the fat cold. Repetition is the key!
"Smoked carp taste just as good as smoked salmon, when you ain't got no salmon"

Rancid Crabtree

Offline DishBogget

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2013
  • Posts: 129
  • Location: Enumclaw
Re: Fleshing.... how to, knives,etc
« Reply #9 on: November 19, 2019, 06:02:18 PM »
The good news is in this market itís a great time to learn fur handling. Holes and tears arenít as painful at these prices.


Sent from my iPhone using Tapatalk

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4611
Re: Fleshing.... how to, knives,etc
« Reply #10 on: November 19, 2019, 06:24:24 PM »
Wow! Those are nice Carp!

Offline predatorpro

  • WA State Trappers Association
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: May 2010
  • Posts: 1713
  • Location: Wenatchee, WA
Re: Fleshing.... how to, knives,etc
« Reply #11 on: November 19, 2019, 09:43:28 PM »
I learned a secret a few years when it comes to coons....i hate to even share this its such a good tip but here it is...dont trap raccoons!  Well there it is! Thats the best trapping advice i got!

Offline Uncle Juju

  • WA State Trappers Association
  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Nov 2018
  • Posts: 11
  • Location: Bremerton
Re: Fleshing.... how to, knives,etc
« Reply #12 on: November 24, 2019, 09:36:28 AM »
After yesterday's trapping class and watching Bruce, I'm going to put some more Edge on my fleshing knife. Not super sharp but definitely more than it has now.
Every day is a new day to prove how awesome you are!

The impossible just takes a little longer!

 


* Advertisement

* Recent Topics

VXR 31.5 by blackveltbowhunter
[Today at 02:39:26 PM]


How rare are bearded hens in NE WA by jrebel
[Today at 02:37:21 PM]


Headed to Unit 39 Idaho Mule Deer by grundy53
[Today at 02:35:17 PM]


Early application numbers from Montana by Ridgerunner
[Today at 02:28:10 PM]


2021 Turkeys!!! Let see those birds. by Russ McDonald
[Today at 01:39:28 PM]


Seeking answers to colville turkey hunting by jrebel
[Today at 01:25:32 PM]


F/S: 18í flatbed trailer (Price reduced) by kidkodger
[Today at 01:00:16 PM]


Lake Stevens Doing Anything? by CP
[Today at 12:15:12 PM]


FS 6.5' canopy $10 by pd
[Today at 12:11:36 PM]


Salmon is set by TriggerMike
[Today at 11:57:07 AM]


WTT/ Rl26 for cci200 by BrandonWatts
[Today at 11:07:35 AM]


Multi season draw results by Ghost Hunter
[Today at 10:57:22 AM]


Best electric bike? by CP
[Today at 10:37:23 AM]


WTS update Threaded 6.5 Creedmore Rifle reduced $450 with scope Smith and Wesson by swanderek
[Today at 10:00:57 AM]


How old do you think this buck is? by mburrows
[Today at 09:25:39 AM]


WTS/WTT 300 WSM and .270 Win ammo by Emptyhanded
[Today at 08:28:38 AM]


WTS 300 wby ammo by Emptyhanded
[Today at 08:27:48 AM]


When do north cascade blacktails rut? by Elkfun12
[Today at 08:23:28 AM]


Buffalo Bore 9mm outdoorsman by dreadi
[Today at 08:16:44 AM]


WTB: Springfield xd, xdm, or possibly a shield by Kc_Kracker
[Today at 07:38:24 AM]