collapse

Advertisement


Author Topic: Striped Screw  (Read 910 times)

Offline spadebit

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Apr 2015
  • Posts: 20
Striped Screw
« on: November 20, 2019, 12:09:29 AM »
May be a dumb question....Does anyone have experience with dealing with/finding a solution for striped screws for the pad on a synthetic shotgun?

In order to replace a recoil spring I have to get two screws off the pad, but they are striped.  Even if they are removed I am unsure if a bigger screw would be a quick fix to hold the pad.  I have seen the fix for wood stocks, but never for synthetic shotguns.

Thanks.

Offline andersonjk4

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2010
  • Posts: 931
  • Location: Spangle, WA
Re: Striped Screw
« Reply #1 on: November 20, 2019, 05:47:42 AM »
If the threads are stripped you may be able to use a flat screwdriver between the stock and the pad to pry against the pad. The added pressure should allow the threads to catch and back out. Once the pad is off you can use some epoxy or something similar to attach some new screws.

Offline Encore 280

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1680
  • Location: Poulsbo
Re: Striped Screw
« Reply #2 on: November 20, 2019, 08:03:31 AM »
I don't think I would be using a flat head screwdriver between the pad and stock. I'm sure it would leave an indent on the stock then it's there forever. Place the gun in a padded vice and while backing the screw out pull on the pad. :twocents: Good luck.

Offline h20hunter

  • Global Moderator
  • Trade Count: (+10)
  • Explorer
  • *****
  • Join Date: Jan 2010
  • Posts: 19195
  • Location: Lake Stevens
Re: Striped Screw
« Reply #3 on: November 20, 2019, 08:48:32 AM »
How about an easy out or reverse thread bit.....go slow, low torque, it should bite and back them right out.

Offline bhawley76

  • Political Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 771
  • Location: curlew wa
Re: Striped Screw
« Reply #4 on: November 20, 2019, 09:08:17 AM »
What kind of shotgun I have a stock for a Mossberg that I had swapped for a pistol grip.

Offline Evil_EdwardO

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2012
  • Posts: 974
  • Location: Albion, WA
  • Groups: NRA, LPC, ASF
Re: Striped Screw
« Reply #5 on: November 20, 2019, 09:24:59 AM »
How about an easy out or reverse thread bit.....go slow, low torque, it should bite and back them right out.

 :yeah:

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 41769
  • Location: E. WA
Re: Striped Screw
« Reply #6 on: November 20, 2019, 10:28:47 AM »
Head stripped or stock threads stripped.

Head stripped, easy out or clamp down stock and use a screwdriver pushing really hard on the head, while not trying to let the driver slip off the head, and use a crescent on the handle of the driver.


Threads stripped on the stock, I might try an epoxy or other hard cure glue that is compatible with the stock material, then re-drill a pilot hole for the screw.

Offline Buckmark

  • Washington For Wildlife
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Oct 2008
  • Posts: 4721
  • Location: GPS is searching
Re: Striped Screw
« Reply #7 on: November 20, 2019, 10:29:31 AM »
Worse case you cant get them out take a hack saw and cut through them.
To hunt and butcher an animal is to recognize that meat is not some abstract form of protein that springs into existence tightly wrapped in cellophane and styrofoam.

Offline jackelope

  • Administrator
  • Trade Count: (+23)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 42646
  • Location: Duvall, WA
  • Groups: WSB RMGA NRA RMEF BHA
Re: Striped Screw
« Reply #8 on: November 20, 2019, 10:32:47 AM »
Are the heads of the screws themselves stripped or the threads in the stock stripped?
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Offline h20hunter

  • Global Moderator
  • Trade Count: (+10)
  • Explorer
  • *****
  • Join Date: Jan 2010
  • Posts: 19195
  • Location: Lake Stevens
Re: Striped Screw
« Reply #9 on: November 20, 2019, 10:34:12 AM »
Hold on everyone.....clear,  easy,  obvious solution.

New shotgun time!

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 41769
  • Location: E. WA
Re: Striped Screw
« Reply #10 on: November 20, 2019, 10:38:48 AM »
:chuckle:

It was so clear and easy that I missed it.

Offline spadebit

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Apr 2015
  • Posts: 20
Re: Striped Screw
« Reply #11 on: November 20, 2019, 07:31:18 PM »
All great replies.

Thanks for the ideas.

I will start with the less intrusive methods and work from there.   

 


* Advertisement

* Recent Topics

Chanterelles by grundy53
[Today at 12:06:14 AM]


Good tripods? by wheels
[Yesterday at 11:25:45 PM]


MA 10 Coho by funkster
[Yesterday at 10:46:52 PM]


Hey all...I Drew the 49 Degrees North Early Bull Moose tag. Looking for pointers by huntnnw
[Yesterday at 10:37:50 PM]


WTS Alaska Fishing Trips (3) that we can't go on.... by kenzmad
[Yesterday at 10:34:58 PM]


What would you consider the best for a meat packing frame/pack? by CastleRocker
[Yesterday at 10:31:25 PM]


2019 Wyoming High Country Deer Hunt by MerriamMagician
[Yesterday at 10:23:54 PM]


Here’s my sign by Blacklab
[Yesterday at 10:05:47 PM]


Amount of raffle tickets sold? by Ridgeratt
[Yesterday at 10:01:39 PM]


Big Blacktails on this thread? by JakeLand
[Yesterday at 09:59:30 PM]


7 calves attacked yesterday by bornhunter
[Yesterday at 09:58:06 PM]


Berry picking by Night goat
[Yesterday at 09:50:18 PM]


Iso room to rent chehalis/ centrailia area by kramman
[Yesterday at 09:33:50 PM]


Cabela's Alaknak 12-ft. x 12-ft. Tent by big wood
[Yesterday at 09:27:17 PM]


Need both some Googlefoo and a talk off the ledge..... by h20hunter
[Yesterday at 09:13:44 PM]


Ladder Test how-to by jasnt
[Yesterday at 09:07:08 PM]


Opportunity for bowhunting for blacktails, Port Angeles - Sequim area by carlyoungs
[Yesterday at 09:04:41 PM]


17 year wait {nooksack archery } by jk78
[Yesterday at 08:50:53 PM]


Wts: marlin 22 mag by parnelli
[Yesterday at 08:48:38 PM]


2021 Ford Bronco by Jellymon
[Yesterday at 08:29:37 PM]