collapse

Advertisement


Author Topic: Christensen arms question?  (Read 2620 times)

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 859
  • Location: Lynden
Christensen arms question?
« on: December 14, 2019, 11:40:10 AM »
Anybody know if you can convert the Christensen Arms Ridgeline to a detachable magazine?
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3159
  • Location: Spokane Wa.
Re: Christensen arms question?
« Reply #1 on: December 14, 2019, 10:25:41 PM »
I don't know for certain, just speculating here, but aren't the CA actions Rem 700 clones and share the same footprint?  If that is true, just about any DM system should work, but like I said, I'm just speculating on that so maybe someone will know for sure.

Offline smdave

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1560
  • Location: WA
    • My Photobooth
Re: Christensen arms question?
« Reply #2 on: December 14, 2019, 10:36:18 PM »
I would email them, they sell a detachable magazine bottom on their accessory page.
When I pass, do not let my wife sell the guns for what I told her they cost.

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 859
  • Location: Lynden
Re: Christensen arms question?
« Reply #3 on: December 15, 2019, 05:25:03 AM »
Thanks for the feed back- just checking to se if anybody knew for sure on here. It is based on the 700 action, on their website I only saw it for the Mesa - I will contact them direct
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline teanawayslayer

  • Non-Hunting Topics
  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 3833
  • Location: Eastside
Re: Christensen arms question?
« Reply #4 on: December 15, 2019, 07:23:33 AM »
They offer the detachable mag on there online store. Pretty sure you can convert it
Happiness is being in the woods!!!

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 859
  • Location: Lynden
Re: Christensen arms question?
« Reply #5 on: December 15, 2019, 08:11:27 AM »
Gonna call them tomorrow and get it ordered up if everything is a go
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+14)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8050
Re: Christensen arms question?
« Reply #6 on: December 15, 2019, 08:30:54 AM »
It looks like it is possibly m5 inlet pattern. If so your stock would need inlet to accept it.

Just a heads up there are much cheaper m5 aics bottom metals out there.

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 859
  • Location: Lynden
Re: Christensen arms question?
« Reply #7 on: January 19, 2020, 05:36:07 AM »
So ended up talking with Christensen a couple times about this - it ends up that they have the mag bottom metal on their website , but they don’t actually sell it. They said it was a mistake that needs to be corrected.
My rifle is currently at Benchmark Barrels for the conversion and should be finished next week. They are converting it to HS Precision bottom metal and mag
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline teanawayslayer

  • Non-Hunting Topics
  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 3833
  • Location: Eastside
Re: Christensen arms question?
« Reply #8 on: January 19, 2020, 07:40:16 AM »
So ended up talking with Christensen a couple times about this - it ends up that they have the mag bottom metal on their website , but they don’t actually sell it. They said it was a mistake that needs to be corrected.
My rifle is currently at Benchmark Barrels for the conversion and should be finished next week. They are converting it to HS Precision bottom metal and mag
[/quote what’s that setting you back? If you don’t mind me asking
Happiness is being in the woods!!!

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 859
  • Location: Lynden
Re: Christensen arms question?
« Reply #9 on: January 19, 2020, 07:45:09 AM »
$400.00 for parts and labor
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline teanawayslayer

  • Non-Hunting Topics
  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 3833
  • Location: Eastside
Re: Christensen arms question?
« Reply #10 on: January 19, 2020, 07:46:35 AM »
That’s not to bad.
Happiness is being in the woods!!!

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 859
  • Location: Lynden
Re: Christensen arms question?
« Reply #11 on: January 19, 2020, 07:52:20 AM »
I didn’t think so either - coulda went with cheaper parts, but the HS parts seemed solid!
Going to be much happier with it now
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline Wetwoodshunter

  • Non-Hunting Topics
  • Trade Count: (+8)
  • Sourdough
  • *****
  • Join Date: Dec 2014
  • Posts: 1163
  • Location: Sekiu, WA
Re: Christensen arms question?
« Reply #12 on: January 19, 2020, 08:23:26 AM »
Tag, please show us the work when it is finished.

  :)

Offline teanawayslayer

  • Non-Hunting Topics
  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 3833
  • Location: Eastside
Re: Christensen arms question?
« Reply #13 on: January 19, 2020, 08:23:30 AM »
I didn’t think so either - coulda went with cheaper parts, but the HS parts seemed solid!
Going to be much happier with it now
I’m going to end up doing the same thing with mine. What caliber are you shooting. I currently have the 300 rum. I bought the side babble brake for it as well. Do most of my shooting from the prone position. No bench shooting. That radial brake blows shat everywhere.
Happiness is being in the woods!!!

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 859
  • Location: Lynden
Re: Christensen arms question?
« Reply #14 on: January 19, 2020, 08:26:15 AM »
Mine is a 300wsm - yours?
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

 


* Advertisement

* Recent Topics

Let’s see your best Washington buck by jjhunter
[Today at 09:12:44 PM]


Hunting Dog Memorial by ghosthunter
[Today at 08:55:30 PM]


Pairs by Dan-o
[Today at 08:15:34 PM]


World Record Archery Blacktail by pd
[Today at 07:31:15 PM]


Let’s see your best Washington bull by trophyhunt
[Today at 07:20:21 PM]


Springer 2024 Columbia River by Blacklab
[Today at 06:50:06 PM]


Holster for FNS 40C by bb76
[Today at 06:37:56 PM]


Bangers and mash by elkrack
[Today at 04:32:06 PM]


Fishing with kids in Wenatchee by elkhunter00
[Today at 04:12:45 PM]


Wenatchee Hydro Park Fishing by Jake Dogfish
[Today at 03:40:17 PM]


Owners of Ireland Farms Dogs by ASHQUACK
[Today at 12:24:39 PM]


1x scopes vs open sights by andersonjk4
[Today at 09:23:28 AM]


2024 sheds…..let’s see em’ by NOCK NOCK
[Today at 07:59:18 AM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal