collapse

Advertisement


Author Topic: Christensen arms question?  (Read 1387 times)

Offline Sakko300wsm

  • Political Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Dec 2015
  • Posts: 422
  • Location: Lynden
Christensen arms question?
« on: December 14, 2019, 11:40:10 AM »
Anybody know if you can convert the Christensen Arms Ridgeline to a detachable magazine?
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline b23

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 2382
  • Location: Spokane Wa.
Re: Christensen arms question?
« Reply #1 on: December 14, 2019, 10:25:41 PM »
I don't know for certain, just speculating here, but aren't the CA actions Rem 700 clones and share the same footprint?  If that is true, just about any DM system should work, but like I said, I'm just speculating on that so maybe someone will know for sure.

Offline smdave

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1563
  • Location: WA
    • My Photobooth
Re: Christensen arms question?
« Reply #2 on: December 14, 2019, 10:36:18 PM »
I would email them, they sell a detachable magazine bottom on their accessory page.
When I pass, do not let my wife sell the guns for what I told her they cost.

Offline Sakko300wsm

  • Political Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Dec 2015
  • Posts: 422
  • Location: Lynden
Re: Christensen arms question?
« Reply #3 on: December 15, 2019, 05:25:03 AM »
Thanks for the feed back- just checking to se if anybody knew for sure on here. It is based on the 700 action, on their website I only saw it for the Mesa - I will contact them direct
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline teanawayslayer

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 2746
  • Location: Eastside
Re: Christensen arms question?
« Reply #4 on: December 15, 2019, 07:23:33 AM »
They offer the detachable mag on there online store. Pretty sure you can convert it
Happiness is being in the woods!!!

Offline Sakko300wsm

  • Political Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Dec 2015
  • Posts: 422
  • Location: Lynden
Re: Christensen arms question?
« Reply #5 on: December 15, 2019, 08:11:27 AM »
Gonna call them tomorrow and get it ordered up if everything is a go
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline BULLBLASTER

  • Chris McCarthy
  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+13)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 7475
  • Volleyfire brigade
Re: Christensen arms question?
« Reply #6 on: December 15, 2019, 08:30:54 AM »
It looks like it is possibly m5 inlet pattern. If so your stock would need inlet to accept it.

Just a heads up there are much cheaper m5 aics bottom metals out there.

Offline Sakko300wsm

  • Political Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Dec 2015
  • Posts: 422
  • Location: Lynden
Re: Christensen arms question?
« Reply #7 on: January 19, 2020, 05:36:07 AM »
So ended up talking with Christensen a couple times about this - it ends up that they have the mag bottom metal on their website , but they donít actually sell it. They said it was a mistake that needs to be corrected.
My rifle is currently at Benchmark Barrels for the conversion and should be finished next week. They are converting it to HS Precision bottom metal and mag
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline teanawayslayer

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 2746
  • Location: Eastside
Re: Christensen arms question?
« Reply #8 on: January 19, 2020, 07:40:16 AM »
So ended up talking with Christensen a couple times about this - it ends up that they have the mag bottom metal on their website , but they donít actually sell it. They said it was a mistake that needs to be corrected.
My rifle is currently at Benchmark Barrels for the conversion and should be finished next week. They are converting it to HS Precision bottom metal and mag
[/quote whatís that setting you back? If you donít mind me asking
Happiness is being in the woods!!!

Offline Sakko300wsm

  • Political Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Dec 2015
  • Posts: 422
  • Location: Lynden
Re: Christensen arms question?
« Reply #9 on: January 19, 2020, 07:45:09 AM »
$400.00 for parts and labor
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline teanawayslayer

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 2746
  • Location: Eastside
Re: Christensen arms question?
« Reply #10 on: January 19, 2020, 07:46:35 AM »
Thatís not to bad.
Happiness is being in the woods!!!

Offline Sakko300wsm

  • Political Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Dec 2015
  • Posts: 422
  • Location: Lynden
Re: Christensen arms question?
« Reply #11 on: January 19, 2020, 07:52:20 AM »
I didnít think so either - coulda went with cheaper parts, but the HS parts seemed solid!
Going to be much happier with it now
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

Offline Wetwoodshunter

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Dec 2014
  • Posts: 746
  • Location: Sekiu, WA
Re: Christensen arms question?
« Reply #12 on: January 19, 2020, 08:23:26 AM »
Tag, please show us the work when it is finished.

  :)

Offline teanawayslayer

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 2746
  • Location: Eastside
Re: Christensen arms question?
« Reply #13 on: January 19, 2020, 08:23:30 AM »
I didnít think so either - coulda went with cheaper parts, but the HS parts seemed solid!
Going to be much happier with it now
Iím going to end up doing the same thing with mine. What caliber are you shooting. I currently have the 300 rum. I bought the side babble brake for it as well. Do most of my shooting from the prone position. No bench shooting. That radial brake blows shat everywhere.
Happiness is being in the woods!!!

Offline Sakko300wsm

  • Political Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Dec 2015
  • Posts: 422
  • Location: Lynden
Re: Christensen arms question?
« Reply #14 on: January 19, 2020, 08:26:15 AM »
Mine is a 300wsm - yours?
VELOCITY MARINE- ALUMINUM BOATS
I hunt fur and fins!!
23' X 9' custom jet in the works
Haxby 550hp 496"
Hammi 241
Stick steer

 


* Advertisement

* Recent Topics

LEUPOLD SX-4 Pro Guide 15-45x65mm HD Angled Spotting Scope And tripod by j_h_nimrod
[Today at 11:03:07 PM]


Lake Wenatchee by Wazntme
[Today at 10:30:34 PM]


Ok BEST bullet in general for elk. by callturner
[Today at 10:29:00 PM]


Putting a bear to bef by huntnnw
[Today at 10:19:20 PM]


Crayfish Mania-2020 by TheStovePipeKid
[Today at 10:18:41 PM]


2020 bears by WildW00d
[Today at 10:16:17 PM]


Shameless crabbing request by h20hunter
[Today at 10:10:37 PM]


Economical training collar with continuous vibrate. by WildW00d
[Today at 10:09:49 PM]


ISO: single shot 20 gauge by Irishbackwoods
[Today at 09:57:47 PM]


Affordable tall tripod by Camo
[Today at 09:55:36 PM]


River fishing, anyone out? by deerlick
[Today at 09:51:52 PM]


Multiseason sale? by Pinetar
[Today at 09:28:23 PM]


FS fire pit by erk444
[Today at 09:25:40 PM]


Rock Creek Archery by Katmai Guy
[Today at 09:16:13 PM]


Weyerhaeuser fire season by The Gobble-stopper
[Today at 08:59:30 PM]


WTB quiver by Katmai Guy
[Today at 08:52:08 PM]


Who's hunted Green River 485? by lonedave
[Today at 08:28:26 PM]


WTS 6.5prc ammo by teanawayslayer
[Today at 08:07:39 PM]


Wife wants a Taurus Judge. Opinions requested by BD1
[Today at 07:37:31 PM]


Garden thief by Fl0und3rz
[Today at 07:28:33 PM]