collapse

Advertisement


Author Topic: Glock 44  (Read 2515 times)

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Glock 44
« on: February 25, 2020, 05:16:22 PM »
This new wait period is dumb!  First time picking up another handgun since the new laws went into effect.
Had to get the new Glock 44.  Been wanting them to build one of these for a long time.  Went to the range and looked over one of the rentals as well.  Wanted to see how they were holding up with several thousand rounds ran through it.  Seems to be holding up well and cycling well.  Figured this would be a good compliment to my Walther P22, Ruger R22, Ruger Mark 3 and S&W .22.
Cut em!
It's not the shells!  It's the shooter!

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12950
  • Location: Arlington
Re: Glock 44
« Reply #1 on: February 25, 2020, 05:21:30 PM »
Sounds like you need a cooling off period.   :chuckle:

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: Glock 44
« Reply #2 on: February 25, 2020, 05:32:41 PM »
Sounds like you need a cooling off period.   :chuckle:

I should submit my mileage and time for reimbursement from Inslee.
Cut em!
It's not the shells!  It's the shooter!

Offline huntandjeep

  • Trade Count: (+13)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 2899
  • Location: West Valley , Yakima
Re: Glock 44
« Reply #3 on: February 25, 2020, 05:56:33 PM »
Wanted to see how they were holding up with several thousand rounds ran through it.  Seems to be holding up well and cycling well. 
I've read of 3 blowing up with less than 500 rds through them . All went back to Glock , were replaced , with no explanation as to why from Glock :dunno:
 
Anyone that thinks a Glock is better than a 1911 paints his toenails.
Yakima Valley Mountaineers

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: Glock 44
« Reply #4 on: February 26, 2020, 07:41:29 AM »
Wanted to see how they were holding up with several thousand rounds ran through it.  Seems to be holding up well and cycling well. 
I've read of 3 blowing up with less than 500 rds through them . All went back to Glock , were replaced , with no explanation as to why from Glock :dunno:

I watched a few of those videos.  Hopefully I don't experience the same.
Cut em!
It's not the shells!  It's the shooter!

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: Glock 44
« Reply #5 on: February 26, 2020, 07:43:06 AM »
Sounds like you need a cooling off period.   :chuckle:

:chuckle:

Looking forward to the review.

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: Glock 44
« Reply #6 on: February 26, 2020, 06:00:36 PM »
Sounds like you need a cooling off period.   :chuckle:

:chuckle:

Looking forward to the review.

Should get my call to pick it up next Wednesday.  :o :o
Cut em!
It's not the shells!  It's the shooter!

Offline Jpmiller

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: May 2016
  • Posts: 4052
  • Location: Martin, ND
Re: Glock 44
« Reply #7 on: February 28, 2020, 06:47:49 AM »
If it was a "common sense" gun law couldn't you pull your concealed carry pistol out and explain you would just use that for a crime if that was your purpose and then they could just hand you your new pistol? Stupid law.

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: Glock 44
« Reply #8 on: February 28, 2020, 07:43:10 AM »
Yep. Thus the carry permit exception in the past. It is idiotic.  It is paid for by Bloomberg's Everytown, wasn't it?

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: Glock 44
« Reply #9 on: February 28, 2020, 08:34:26 AM »
Yep. Thus the carry permit exception in the past. It is idiotic.  It is paid for by Bloomberg's Everytown, wasn't it?

Bloomberg, Gates, Balmer and one other billionaire all put in a chunk of change.  What's crazy is the last two votes have gone almost exact 60/40.  They target the markets that make up most of the voters as well.  Unfortunate part is that I think the turnout was less than 40%.  non-voters are handing these wins to the dems.
Cut em!
It's not the shells!  It's the shooter!

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12950
  • Location: Arlington
Re: Glock 44
« Reply #10 on: February 28, 2020, 09:09:36 AM »
I get that they don't want guns.  I don't agree, but I understand their position.

What I don't understand is that zero has been done to improve the database.  All kinds of people that shouldn't have guns aren't in the database because of government bureaucracy, lack of funding, old systems and a host of other reasons that can easily be fixed with some money.  That would absolutely prevent bad guys from getting guns yet it isn't even on the list of things to do.

We're so entrenched that they refuse to do anything both sides agree on, it has to be confrontational or they aren't interested.

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: Glock 44
« Reply #11 on: March 02, 2020, 08:52:32 AM »
I was supposed to get a call this Wednesday to pick it up.  They called on Friday.  I picked it up on Sunday.  Ran a through mags through it without issue.  I will have another chance this weekend to take it out and run a few hundred round through it.

Side note.  When I purchased the gun, I had not heard of any of the issues they were having.  Also the same guy that sold it to me had not mentioned any issues as well.  When I went to pick it up, they guy that originally sold it to me said have you heard of the issues they are having with this.  Would have been nice to know prior.  Then he tried to sell me their 1 year coverage plan for $40.  I said nope.

Hopefully I don't run into the issues they are seeing with these G44.  If I do, it will be sent back to Glock to have them fixed.  They have had good customer service in the past, so hopefully that continues.
Cut em!
It's not the shells!  It's the shooter!

Offline Fl0und3rz

  • Forum Sponsor
  • Trade Count: (+7)
  • Legend
  • *****
  • Join Date: Oct 2010
  • Posts: 51553
  • Location: E. WA
Re: Glock 44
« Reply #12 on: March 02, 2020, 09:29:38 AM »
Congratulations.  Pics?

 


* Advertisement

* Recent Topics

2025 Quality Chewuch Tag by Schmalzfam
[Today at 10:16:24 PM]


Need information on having a gunsmith thread a barrel for thin walled chokes. by elkslayer069
[Today at 09:51:42 PM]


erronulvin trail cam photos by actionshooter
[Today at 09:04:17 PM]


1st Quality Deer tag in Washington and its a muzzleloader tag by greenhead_killer
[Today at 08:32:48 PM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by ghosthunter
[Today at 07:44:01 PM]


2024 Quality Buck coming home by Kingofthemountain83
[Today at 07:17:01 PM]


2025 Washington Rocky Mountain Bighorn Sheep Raffle by GurrCentral
[Today at 06:50:57 PM]


KODIAK06 2025 trail cam and personal pics thread by Kingofthemountain83
[Today at 06:39:14 PM]


Blue Mtn Foothills West Rifle Tag by SEWA509
[Today at 06:18:20 PM]


Ten Years, and still plugging along by buglebuster
[Today at 05:27:01 PM]


Sockeye Numbers by Stein
[Today at 05:12:28 PM]


Colockum Archery Bull Tag by SkookumHntr
[Today at 04:15:27 PM]


Public Land Sale Senate Budget Reconciliation by Tbar
[Today at 03:47:14 PM]


Asking for Gift of Knowledge by Silversands
[Today at 02:48:58 PM]


What bull would you pick? by Gentrys
[Today at 11:34:17 AM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by hunter399
[Today at 11:29:38 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by Gentrys
[Today at 11:21:15 AM]


White River MF Bull Permit by TimbersEdge
[Today at 10:59:45 AM]


Observatory quality bull rifle by yakimanoob
[Today at 08:32:46 AM]


3 days for Kings by brocka
[Today at 08:29:39 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal