collapse

Advertisement


Author Topic: Mounting Scope - who uses a level?  (Read 4006 times)

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Mounting Scope - who uses a level?
« on: March 31, 2020, 10:12:03 PM »
I was carefully mounting buddy’s scope then realized - why bother?  Just adjust til it sits and looks level when you shoulder it.  The only important thing is that the level indicator ( you have one right?) matches up with the scope crosshairs. 

If I naturally shoulder the stock canted 3 degrees then leave it there just make sure scope is vertical at that point. 

Does anyone level their scope to where they naturally shoulder their stock instead trying to get stock perfectly level?   Seems like a novel concept.


Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4821
  • Location: Puyallup
Re: Mounting Scope - who uses a level?
« Reply #1 on: March 31, 2020, 10:50:06 PM »
I try to get it close with the leveling kit that came with my scope mounting kit.  Double check if off a kitchen cabinet that I know is level.  This is off the bipod. 

Offline Skillet

  • Business Sponsor
  • Trade Count: (+42)
  • Old Salt
  • *****
  • Join Date: Jun 2009
  • Posts: 5624
  • Location: Sitka, AK
Re: Mounting Scope - who uses a level?
« Reply #2 on: March 31, 2020, 10:55:15 PM »
Won't a 3 degree cant alter the drop relative to the crosshairs?  In a zero sidewind environment, I expect my bullets to drop exactly along the vertical crosshairs.

To illustrate the point,  mount a scope at 45 degrees to the right and go shooting. On zero it wouldn't matter, but if you needed to hold over at all you're going to send the bullet to the right of the target (assuming you use the lower half of the vertical crosshair to determine where bullet will drop).

There's another issue if you have CDS dials.  The vertical drop is calculated assuming a straight drop.  But if your scope is canted, you're vertical calculation is actually the hypotenuse of a right triangle, and the actual bullet drop is the long leg.  There's some trigonometry involved now, and you could actually calculate it for each shot using the angle of cant. In your 3 degree scenario, the bullet will drop a factor of .99863 of what they CDS dials predict. still trying to figure it how to relate this to real-world results  :chuckle:

This isn't taking into account the additional windage introduced because of the 3 degree cant of the pipe relative to the line of sight either.  The more offset the line of sight is from the bore, the more introduced windage you'll see. 

At most common hunting ranges, it won't matter. But at 1000 yards, it could.

Interesting thought exercise.   :tup:
KABOOM Count - 1

"The ocean is calling, and I must go."

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Mounting Scope - who uses a level?
« Reply #3 on: March 31, 2020, 11:04:41 PM »
Yes scope needs to be vertical at the shot - but stock/action/barrel can be anywhere.  Doesn’t matter - right???

Offline Skillet

  • Business Sponsor
  • Trade Count: (+42)
  • Old Salt
  • *****
  • Join Date: Jun 2009
  • Posts: 5624
  • Location: Sitka, AK
Re: Mounting Scope - who uses a level?
« Reply #4 on: March 31, 2020, 11:13:17 PM »
*Ok, I figured it out. Using the 3 degree tilt to to the right and CDS dial scenario, your bullet will hit a factor of .137% low from CDS calculated drop and 5.23% of the calculated drop to the right of the target. 

So at 1000 yards, if the round you're shooting is calculated on the dials to drop 100 inches from line of sight, you will actually hit .137 inches lower and 5.23 inches to the right.
KABOOM Count - 1

"The ocean is calling, and I must go."

Offline Skillet

  • Business Sponsor
  • Trade Count: (+42)
  • Old Salt
  • *****
  • Join Date: Jun 2009
  • Posts: 5624
  • Location: Sitka, AK
Re: Mounting Scope - who uses a level?
« Reply #5 on: March 31, 2020, 11:24:10 PM »
Yes scope needs to be vertical at the shot - but stock/action/barrel can be anywhere.  Doesn’t matter - right???

Practically, it doesn't. But let's say you're shooting a 45-70 at 1000 yards, and need 45 degrees of difference between line of sight and barrel.

If you imagine another triangle (this will be a right triangle) one leg is the scope and the hypotenuse is the barrel. If you rotate the triangle along the scope 10 degrees to the right, the barrel (hypotenuse) rotates as well. As it does so it "swings" out of line with the scope, and is now pointing to the right of the scope's line of sight. 

It's not much, but it's there. If you had some data we could calculate actual numbers.  We'd need the zero yardage, angle of scope cant, height of scope mounted from barrel, and bullet trajectory/drop at various yardages.

KABOOM Count - 1

"The ocean is calling, and I must go."

Offline dreadi

  • Business Sponsor
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Aug 2016
  • Posts: 1066
  • Location: Tacoma
    • http://www.facebook.com/blackhammerarms
    • Black Hammer Arms
Re: Mounting Scope - who uses a level?
« Reply #6 on: March 31, 2020, 11:51:26 PM »
I use multiple levels.
BLACK HAMMER ARMS
Buy A Suppressor http://www.silencershop.com/blackhammerarms
1911 Pistolsmithing
Firearm Refinishing
GLOCK Certified Armorer
CMMG Authorized Dealer
NEMO Arms Authorized Dealer
http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms/

Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 392
  • Location: JBLM
Re: Mounting Scope - who uses a level?
« Reply #7 on: April 01, 2020, 12:04:38 AM »
I mount a bipod on the gun and set it down on the ground
Then behind the gun use a plumb line as close to the wall as possible
I max out the eyepiece and use a surefire light at the objective lens to project the cross hairs onto the wall..

I then adjust it to match up with the plumb line and tighten up checking often.

Not all crosshairs are level with the scope tube it sits in.

This is just the method I use and it's worked for me. However I'm sure there are better ways.

Happy shooting and stay safe 👍

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Mounting Scope - who uses a level?
« Reply #8 on: April 01, 2020, 06:31:00 AM »
I mount a bipod on the gun and set it down on the ground
Then behind the gun use a plumb line as close to the wall as possible
I max out the eyepiece and use a surefire light at the objective lens to project the cross hairs onto the wall..

I then adjust it to match up with the plumb line and tighten up checking often.

Not all crosshairs are level with the scope tube it sits in.

This is just the method I use and it's worked for me. However I'm sure there are better ways.

Happy shooting and stay safe 👍

I like this!  Gonna try it.

Offline Alan K

  • Political & Covid-19 Topics
  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Sep 2008
  • Posts: 2953
  • Location: Lewis County, WA
  • University of Idaho Alumni
Re: Mounting Scope - who uses a level?
« Reply #9 on: April 01, 2020, 06:49:25 AM »
Skillet illustrated it pretty well, but it absolutely does matter that your crosshairs are perfectly vertical to your barrel. Your scope and barrel are not on the same plane, so if there is any cant, adjusting a vertical turret accounts for less vertical than it should, and adjusts left or right depending on your cant. It will make you second guess your wind calls.

If it's a brush gun, in all reality eyeballing it is fine. For any 'long range' shooting you need to be vertical.

https://www.cabelas.com/product/Wheeler-Pro-Reticle-Level-System/1168205.uts

This is what I use. I wouldn't even know how many scopes I've mounted with it. Pretty cheap in the big picture for the assurances it gives.

Offline Katmai Guy

  • Retired
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jul 2014
  • Posts: 1436
  • Location: Covington
Re: Mounting Scope - who uses a level?
« Reply #10 on: April 01, 2020, 07:23:32 AM »
When you clamp the level on the barrel, how do you make sure the action is level side to side, level across the bottom half of the bottom half of the scope rings?
"Keep shootin, when there's lead in the air, there's hope"

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Mounting Scope - who uses a level?
« Reply #11 on: April 01, 2020, 07:51:47 AM »
When you clamp the level on the barrel, how do you make sure the action is level side to side, level across the bottom half of the bottom half of the scope rings?
On the Mark V I couldn’t find a level spot except the ring halves and those didn’t match exactly.

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3171
  • Location: Spokane Wa.
Re: Mounting Scope - who uses a level?
« Reply #12 on: April 01, 2020, 07:53:50 AM »
The scope leveling kit from Defensive Edge is a pretty slick setup. 
list=RDCMUCtf8DnvqxrKa9w10dyXSopA&start_radio=1&t=714

http://defensiveedge.net/index.php/products/137-scope-leveling-kit

Offline bustedoldman

  • Business Sponsor
  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Jul 2015
  • Posts: 542
  • Location: Moses Lake
  • TEAM Potbelly Stallions
Re: Mounting Scope - who uses a level?
« Reply #13 on: April 01, 2020, 07:58:24 AM »
Not only do i use levels but an angle finder as well..........Works fantastic.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Mounting Scope - who uses a level?
« Reply #14 on: April 01, 2020, 08:03:25 AM »
Not only do i use levels but an angle finder as well..........Works fantastic.

Angle finder ?  How?   April 1st ?   :chuckle:

 


* Advertisement

* Recent Topics

Springer Fishing Opportunity 3/29 & 3/30 by Blacklab
[Today at 12:48:56 PM]


Long Beach Clamming Tides by dilleytech
[Today at 12:39:19 PM]


Let’s see your best Washington buck by abhold87
[Today at 12:03:27 PM]


Bearpaw Season - Spring 2024 by bearpaw
[Today at 11:45:41 AM]


Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Springer 2024 Columbia River by WSU
[Today at 08:31:10 AM]


Average by lhrbull
[Today at 07:31:56 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal