collapse

Advertisement


Author Topic: AR Accuracy  (Read 1149 times)

Offline Jingles

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2011
  • Posts: 2205
  • Location: 98862
  • Life is short so enjoy it to the MAX
AR Accuracy
« on: April 02, 2020, 05:27:36 AM »
Hopefully an Owner out there that is more versed in AR accuracy than myself. Been a long time since I had to worry about hitting the target with an AR style rifle and then it was an honest to god M16 where targets were marked by person stuck in the butts and targets were raised and lowered.
 Maybe I'm expecting to much from a gas gun but shouldn't an AR at least be able to produce .5 to .75 groups @ 100 yds. Using a factory built rifle have tried loads using various powders and bullet weights.. About ready to say screw it and rig it for spray and pray only
HMC/USN/RET
1969 -1990

Offline 300rum

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1952
Re: AR Accuracy
« Reply #1 on: April 02, 2020, 05:36:14 AM »
Buy a couple boxes of 69gr Federal GMM and see what it does. 

Offline hunter399

  • Political Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Feb 2014
  • Posts: 2509
  • Location: In your hunting spot
  • Groups: NRA RMEF
Re: AR Accuracy
« Reply #2 on: April 02, 2020, 05:44:12 AM »
Tell us what kind of groups your getting exactly.
How many rounds through your barrel.
Twist rate.
More info on ammo you have tried ,and I'm sure you'll get more advise.
Two birds in the Bush is always better than one in the hand-that way you can always go to the Bush and hunt another day .conservation=Better hunting.
Wrote by hunter399

Offline luvmystang67

  • Past Sponsor
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Oct 2010
  • Posts: 1762
  • Location: Snohomish
Re: AR Accuracy
« Reply #3 on: April 02, 2020, 06:05:31 AM »
I don't know that I expect a cheap factory rifle to hit that.

Some of those barrels are pretty cheap.  With a decent barrel this should be doable.  If you can't find a load that this likes, get an 18" $200 barrel and you should be good to go.

 :twocents:

Offline Jingles

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2011
  • Posts: 2205
  • Location: 98862
  • Life is short so enjoy it to the MAX
Re: AR Accuracy
« Reply #4 on: April 02, 2020, 06:41:17 AM »
Tell us what kind of groups your getting exactly.
How many rounds through your barrel.
Twist rate.
More info on ammo you have tried ,and I'm sure you'll get more advise.

Factory rifle is a Stag Retro 15L, yea a lefty
 1:8 twist probably 300 rounds downrange, tried 55 gr  SBT, FMJBT to 65 gr SBT and FMJBT loaded with everything from 1.5 gr below to recommended max in .5 gr increments for each, using sight vice and best group so far has been 1.5 inches @ 100yds  with 62 gr FMJBT(SS109's) 26.5 gr H335 CCI400  have also tried IMR 4835, RE7, IMR 4064 loaded max. using a vortex Diamondback HD 6.5 - 20 X44 
was using the 4 corners in the picture for targets
« Last Edit: April 02, 2020, 06:47:05 AM by Jingles »
HMC/USN/RET
1969 -1990

Offline zwickeyman

  • Past Sponsor
  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Nov 2014
  • Posts: 796
  • Location: North Bend
Re: AR Accuracy
« Reply #5 on: April 02, 2020, 07:00:35 AM »
Im with luvmystang67

Get a better barrel


 Im building an AR pistol right now. 3 places not to skimp. Barrel, BCG an lower kit

Offline Hilltop123

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2011
  • Posts: 1500
  • Location: Up on the Ump
Re: AR Accuracy
« Reply #6 on: April 02, 2020, 07:06:38 AM »
Yup, looks to be a minute of center mass

Offline hunter399

  • Political Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Feb 2014
  • Posts: 2509
  • Location: In your hunting spot
  • Groups: NRA RMEF
Re: AR Accuracy
« Reply #7 on: April 02, 2020, 07:07:32 AM »
Maybe bump your charge down to 24-24.5 hodgdon load data says your pretty hot right now.
« Last Edit: April 02, 2020, 07:14:30 AM by hunter399 »
Two birds in the Bush is always better than one in the hand-that way you can always go to the Bush and hunt another day .conservation=Better hunting.
Wrote by hunter399

Offline hunter399

  • Political Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Feb 2014
  • Posts: 2509
  • Location: In your hunting spot
  • Groups: NRA RMEF
Re: AR Accuracy
« Reply #8 on: April 02, 2020, 07:18:17 AM »
I can't say much I'm always over max on my loads too .
But if I'm not getting good loads ,I'll move my powder charge just to see if there is room to improve .I would say start moving your powder charge down if no improvement ,then maybe barrel issue.
Two birds in the Bush is always better than one in the hand-that way you can always go to the Bush and hunt another day .conservation=Better hunting.
Wrote by hunter399

Offline Wanttohuntmore

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1510
Re: AR Accuracy
« Reply #9 on: April 02, 2020, 07:26:29 AM »
Try some Sierra match kings, they always seem to shoot well.   1moa should be attainable.  I have issues shooting at green bullseye if the lighting is off, maybe use a black 1" dot inside?

Offline Jingles

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2011
  • Posts: 2205
  • Location: 98862
  • Life is short so enjoy it to the MAX
Re: AR Accuracy
« Reply #10 on: April 02, 2020, 08:32:44 AM »
I have been basing my loads off the Sierra and Lyman books so did not think I was loading hot compared to what I have my 06 loaded to 58gr 4350 180 gr SBT
HMC/USN/RET
1969 -1990

Offline h20hunter

  • Global Moderator
  • Trade Count: (+10)
  • Explorer
  • *****
  • Join Date: Jan 2010
  • Posts: 19181
  • Location: Lake Stevens
Re: AR Accuracy
« Reply #11 on: April 02, 2020, 08:38:09 AM »
Imo, I would replace every factory ar trigger I've personally handled.

Offline konradcountry

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: May 2016
  • Posts: 708
  • Location: SouthWest
Re: AR Accuracy
« Reply #12 on: April 02, 2020, 08:51:12 AM »
Buy a couple boxes of 69gr Federal GMM and see what it does.

I'm gonna second this. Run a match 68 or 69.

Should be able to get an inch with that rifle.


Offline Cougartail

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2012
  • Posts: 1396
  • Location: Eastern Washington
Re: AR Accuracy
« Reply #13 on: April 02, 2020, 09:31:54 AM »
Hopefully an Owner out there that is more versed in AR accuracy than myself. Been a long time since I had to worry about hitting the target with an AR style rifle and then it was an honest to god M16 where targets were marked by person stuck in the butts and targets were raised and lowered.
 Maybe I'm expecting to much from a gas gun but shouldn't an AR at least be able to produce .5 to .75 groups @ 100 yds. Using a factory built rifle have tried loads using various powders and bullet weights.. About ready to say screw it and rig it for spray and pray only

I have 3 ARs. Two are for self defense and one for hunting As long as I get "minute of dirtbag" with the two self defense rifles I'm fine. For hunting I bought a Rock River ATH. Guaranteed .75 inch groups but will shoot 3/8 inch groups. My cheaper ARs won't do that regardless of ammo.
All illegal immigrants should be deported with a liberal under each arm.

Offline konradcountry

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: May 2016
  • Posts: 708
  • Location: SouthWest
Re: AR Accuracy
« Reply #14 on: April 02, 2020, 01:20:55 PM »
I think it is reasonable to expect 1 MOA from an off the shelf Stag. They aren't a low end brand.

If you have a bad barrel that kind of sucks because they aren't known for their customer service.

Nothing wrong with a minute of zombie rifle.

If you really want to get into accuracy you probably want a free floated barrel anyways.

 


* Advertisement

* Recent Topics

WTS Marlin SBL 45-70 by bankwalker
[Today at 12:16:12 AM]


My first turkey by Shooting Stix
[Yesterday at 11:59:40 PM]


Wdfw survey by Bango skank
[Yesterday at 11:54:31 PM]


Cold weather gear by MtnMuley
[Yesterday at 11:33:56 PM]


Wild Turkey Recipes.... by MtnMuley
[Yesterday at 11:22:05 PM]


What to do with cape by BlackRiverTaxidermy
[Yesterday at 10:51:19 PM]


17 year wait {nooksack archery } by jk78
[Yesterday at 10:36:53 PM]


cost of a hair on Tan, and who will do these now???? by bobcat
[Yesterday at 10:25:50 PM]


WTS Hoyt Powermax (SOLD) by slbrija10
[Yesterday at 10:19:42 PM]


Yearly mighty Columbia asault !! by HUNTINCOUPLE
[Yesterday at 10:18:47 PM]


wts nikon monarch 5-25x50 scope by RightPlace-RightTime
[Yesterday at 10:17:20 PM]


Kapowsin and Eatinville open but NOT White River??? by Rookie24
[Yesterday at 10:07:53 PM]


Looking for a Fawn distress call - mouth only. by bearmanric
[Yesterday at 10:05:13 PM]


Trail cam pics 2020( updated 7-7) by huntnnw
[Yesterday at 09:58:23 PM]


Archery Target by idaho guy
[Yesterday at 09:46:00 PM]


WTS- Toyo M/T Open Country 275/70R18 mud terrain tires by mtn.goat
[Yesterday at 09:36:33 PM]


Buying a pistol in Idaho by 724wd
[Yesterday at 09:35:20 PM]


Blacktails a few bear by Smith_22
[Yesterday at 09:34:22 PM]


2020 Sheds....post them here!!! by Birdguy
[Yesterday at 09:26:08 PM]


Getting a Pup! by Birdguy
[Yesterday at 09:23:45 PM]