Author Topic: new M/L hunter advice  (Read 536 times)

Offline brew

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: May 2010
  • Posts: 1170
  • Location: yelm
new M/L hunter advice
« on: May 03, 2020, 06:53:14 PM »
so I received my optima V2 for my birthday and am looking forward to trying it this year elk hunting.  I have thousands of questions...starting out do I need "season" the barrel like regular firearm's and clean the rifle after each shot ?  The breech plug that comes with the rifle is for pellets.  do I need to buy a different breech plug and try loose powder?  thinking of using powerbelts .  Have read some of the threads but it seems like everyone has their own way of cleaning...have read a lot about using boiling water to clean the barrel ?  can you do this or use a manufactured bore cleaner ?   Way to many questions to start with but just looking for a starting point.  Great thing about my situation is that I have a way of shooting it at the house so I can try many different things to get something going without spending a lot of time going to the range.
beer---it's whats for dinner

Offline usmc74

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Mar 2009
  • Posts: 1247
  • Location: North Bend
  • Groups: NRA (Life), RMEF, SAF (Life)
Re: new M/L hunter advice
« Reply #1 on: May 03, 2020, 06:58:22 PM »
I clean with hot water, I don't shoot powerbelts (I use Barnes TMZ), no seasoning required.

Offline haftard

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2020
  • Posts: 55
  • Location: vancover
Re: new M/L hunter advice
« Reply #2 on: August 04, 2020, 11:30:44 AM »
I hope you have gotten out to shoot sice you posted. With my optima i clean,every 5 or 6 shots. Normaly just a dry patch or a boar snake. Clean its realy realy well when your done shooting or hunting m. Get in there with qtips and clean thr action realy well.
For loads i would stay away from power belts. I shot the blood line bullets. The tmz are realy good also. The hornady sst's are a good option. I shot my elk last year with 150g of 777 pellets with a 350g bloodline bullet. I dont forsee any issues you could have with a all coper or brass bullet. Good luck.

Offline James

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2009
  • Posts: 217
  • Location: Washington
Re: new M/L hunter advice
« Reply #3 on: August 04, 2020, 11:48:54 AM »
My Accura MR shoots Federal BOR Lock MZ's really well, and they load like butter. Almost don't need a bullet starter, I would recommend them over powerbelts.

Check with CVA but I think the only loose powder that takes a special breach plug is Blackhorn, all others (meant for muzzys) should be fine.

I use the CVA cleaning kit, but there are cheaper options (hot water, windex, etc.)

You will never shoot a camp bull by spending all your time hunting in the woods.

Offline callturner

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2020
  • Posts: 118
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: new M/L hunter advice
« Reply #4 on: August 04, 2020, 02:02:28 PM »
My Accura V2 shoots awesome! 77 weighed gr of Blackhorn 209 in a Blackhorn breech plug under a 300 gr Speer Deep Curl .452 in a Harvester crush rib black sabot fired off by a 209 primer. I clean with Windex w/ ammonia and DO NOT swab between shots.

Online MountainDevil54

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2012
  • Posts: 540
  • Location: Boncarbo Colorado


* Advertisement

* Recent Topics

1969 GTO by Sutherland
[Today at 01:44:55 PM]

Idaho 2021 Cost Increase for Non Res by Karl Blanchard
[Today at 01:44:10 PM]

Rendered Bear Grease by buckfvr
[Today at 01:28:03 PM]

Merwin Muskies by Skyvalhunter
[Today at 01:05:53 PM]

Kuiu Crazyelk shirts. by rosscrazyelk
[Today at 01:03:31 PM]

2020 Blacktail rut/pre-rut thread by cavemann
[Today at 01:01:26 PM]

Buddy looking to buy, big game rifle.... by Bill W
[Today at 12:58:07 PM]

My first ever big game animal harvested! by grundy53
[Today at 12:47:10 PM]

generator help by blackpowderhunter
[Today at 12:38:00 PM]

Leupold VX-3 4.5 x 14 x 40 CDS Dial Help by HntnFsh
[Today at 12:16:18 PM]

WTB Glock 19 lower frame. 80% is fine by farfrompar28
[Today at 11:59:18 AM]

2020 Deer post em here by Timberstalker
[Today at 11:58:30 AM]

Breadcrumb Nocks by MR5x5
[Today at 11:58:16 AM]

Lots Of Commercial Fishing Boats Fishing By The Hood Canal Bridge by SeatoSummit88
[Today at 11:50:46 AM]

How is the northern end of 251 Mission for deer? by Skyvalhunter
[Today at 11:48:37 AM]

Beaver & Muskrat Carcasses by Norman89
[Today at 11:39:47 AM]

Beginner elk questions by WSU
[Today at 11:15:17 AM]

FS: Remington 870 20g by solomtnhunter
[Today at 10:51:07 AM]

First Hunt Meat Care by birddogdad
[Today at 10:48:11 AM]

HUNT JR's Peaches Ridge Bull Hunt by HUNT JR
[Today at 10:48:09 AM]