collapse

Advertisement


Author Topic: Knight Western Ulite in the Rock Pit  (Read 637 times)

Online Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2207
  • Location: Idaho, Northern
Knight Western Ulite in the Rock Pit
« on: July 07, 2020, 03:53:14 PM »
Well I finally got time to test shoot the Barnes bullet that I cut knurls in to increase the diameter of the bullet to fit my rifle.  So this morning I drove out to the Rock Pit and setup for a good morning of shooting.  And when it was over it was a good morning of shooting.

Got to the pit and got everything setup. When I started shooting I chose to shoot the Lehigh .458x275 in an Orange .457/.458x50 sabot to confirm that the rifle was sighted in. The first two shots at the Clays verified the rifle was sighted in. 

Some of you might remember a couple of weeks ago I took a handful of Barnes 50x275 MZ Expanders and using a tubing cutter and an Allen wrench and cut knurling lines in the bullet to increase the diameter of the bullet to fit the bore on my Western ULite.

This picture shows the knurling operation in progress.



Todays shooting was to verify the fit and accuracy of the bullet.  It was a good day! 





The last two shots of the morning really produced a feel good moment.  I found a Clay chip from a previous visit on the rock wall and decided to go after it.  My rifle is sighted in to shoot 2.97" , well three inches high at 100.  Knowing that I tried to hold the bead under the chip approximately 3" under the chip.  My first shot was high - I missed.  Loaded up again and held slightly lower and took the shot.  Chip left the wall.

Now I really wish I could use them during ML season here, but I will be able to use in our regular rifle season.



Keep shooting muzzleloaders - They are a blast!!

Offline haftard

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2020
  • Posts: 57
  • Location: vancover
Re: Knight Western Ulite in the Rock Pit
« Reply #1 on: August 04, 2020, 11:20:57 AM »
What sights are those on your muzzle stuffer.

Online Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2207
  • Location: Idaho, Northern
Re: Knight Western Ulite in the Rock Pit
« Reply #2 on: August 04, 2020, 04:24:44 PM »
I have removed the factory Knigh sights and replaced them with Williams sights

Williams FP Peep sight.



And a Williams ramp, Williams fiber Fire Sight Optic sight, with a Williams Fire Sight hood

I have found that I really like a Green fiber rod versus the Red rod



I have the part numbers if you want them

Keep shooting muzzleloaders - They are a blast!!

Offline Brushbuster

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2007
  • Posts: 727
Re: Knight Western Ulite in the Rock Pit
« Reply #3 on: August 04, 2020, 05:35:52 PM »
I have removed the factory Knigh sights and replaced them with Williams sights

Williams FP Peep sight.



And a Williams ramp, Williams fiber Fire Sight Optic sight, with a Williams Fire Sight hood

I have found that I really like a Green fiber rod versus the Red rod



I have the part numbers if you want them

Sabotloader: Did you need to modify the stock to get the Williams Sight to work? I have the same rifle but didn't think the Williams FP Peep would work without a mod to the stock. Thanks

Online Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2207
  • Location: Idaho, Northern
Re: Knight Western Ulite in the Rock Pit
« Reply #4 on: August 04, 2020, 08:10:04 PM »
I did have to modify the stock a little bit and I also had to modify the sight slightly also.  Not sure I have pictures but I will look and I do not I will get some.

This is what one forum member did but I didn't do quite as much cutting on the stock





This picture shows the stock modification I made.



Then with a metal file I filed the back side of the elevation bar to contour to fit over the stock. This filing takes patience and frequent testing for fit.





This is the view from underside of the sight.



Works very well for me - I have completed 4 of these operations.  Three and four were a lot easier than 1 & 2

One other filing operation will probably be need to keep the bolt handle from hitting the underside of the elevation bar as you lift the bolt handle up.

If you look at the pictures carefully you will see where I contoured the bottom of the so the bolt will not hit the bar... wait I think I have a pic of that also - just got to find it.



Really hope some of this helps

mike



Keep shooting muzzleloaders - They are a blast!!

Offline Brushbuster

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2007
  • Posts: 727
Re: Knight Western Ulite in the Rock Pit
« Reply #5 on: August 04, 2020, 08:46:13 PM »
Thank You Sabotloader. I got a great deal on my Ulite when I bought it during the Veteran's Day sale last year. I finally got all the Williams parts you have switched out for your Ulite except for the peep. I prefer the Williams FP cuz that is what I have on my Bighorn & Disc Extreme. I ended up getting a NECG WEAVER Peep Sight. I thought that I would just check to be sure Williams didn't have a peep I could use without doing the mods to my new gun. Thank you much for taking the time to respond.

I don't have any muzzy hunts planned for this fall so getting my new gun setup & range visits will probably need to wait until after the new year.

Thank you for all you do.

Online Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2207
  • Location: Idaho, Northern
Re: Knight Western Ulite in the Rock Pit
« Reply #6 on: August 05, 2020, 01:00:02 PM »
If you ever want to go for the FP installation - let me know I will help you all I can.
Keep shooting muzzleloaders - They are a blast!!

Offline Brushbuster

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2007
  • Posts: 727
Re: Knight Western Ulite in the Rock Pit
« Reply #7 on: August 05, 2020, 02:18:12 PM »
Thank you Sabotloader. I sent you a pm.  :tup:

 


* Advertisement

* Recent Topics

Moose selkirk by trophyhunt
[Today at 11:02:33 AM]


Road Hunters/Road-Hunting - does it spook deer? (new hunter) by Aeron
[Today at 11:01:55 AM]


Hearing protection still hunting by Stein
[Today at 11:00:39 AM]


Chewuch Quality Deer by bigmacc
[Today at 10:57:22 AM]


2020 Deer post em here by Tree Farmer
[Today at 10:51:29 AM]


Didnít see him staring at me....until it was too late by Aeron
[Today at 10:44:32 AM]


Mason County Buck tag Nov 1-18 by MtnMuley
[Today at 10:06:37 AM]


WTS primers by huntingfool7
[Today at 09:52:53 AM]


Cougar Quota 2020 by rainshadow1
[Today at 09:47:54 AM]


HUNT JR's Peaches Ridge Bull Hunt by C-Money
[Today at 09:42:49 AM]


Waterproof Glove Recommendations by andersonjk4
[Today at 09:34:30 AM]


Everything else has went to crap this year. Why not deer camp too. by turkeyfeather
[Today at 09:24:26 AM]


Euro Mount Help by Magnum_Willys
[Today at 09:22:27 AM]


Wenaha West Help by dvolmer
[Today at 09:17:24 AM]


Question on thermal scopes by LDennis24
[Today at 08:53:01 AM]


Need help aging a pheasant by MR5x5
[Today at 08:52:50 AM]


Over 65 Alkali GMU 371 Elk by teanawayslayer
[Today at 08:41:56 AM]


Buddy looking to buy, big game rifle.... by highside74
[Today at 08:31:15 AM]


Calling Bears ?? by dilleytech
[Today at 08:28:31 AM]


Is it time to make Bow Seasons same rules as Rifle and Muzzy? by Ironhead
[Today at 08:27:05 AM]