collapse

Advertisement


Author Topic: Bullet Starter Advice  (Read 2689 times)

Offline HAGEMANIAC

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2020
  • Posts: 241
  • Location: Northeast, WA
  • Groups: NRA, NWTF, RMEF, VFW
Bullet Starter Advice
« on: September 26, 2020, 08:04:27 PM »
New muzzy this year, Knight Bighorn. They have came a long way from last I hunted with one 20 years ago. Anyone have experience with a ball/bullet starter damaging the polymer tips of Barnes bullets? I bought the Barnes jag for my rod, but I'm worried I may damage the tips getting them started.  Any advice/experience/recommendations for this? Thanks
God made man, Samuel Colt made them equal.

Offline BigGoonTuna

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 2205
  • Location: Rainier
Re: Bullet Starter Advice
« Reply #1 on: September 26, 2020, 08:13:28 PM »
I have a bullet starter, but rarely use it. Itís threaded so you can use one of the Barnes jags if you felt so inclined.

I pretty much always use one of the aftermarket jags on my knight ramrod with any sort of tipped bullets; the threaded hole has a tendency to grab the gummy tips and pull them out of the sabot   :yike:
you can still get gas in heaven, and a drink in kingdom come,
in the meantime, i'll be cleaning my gun

Offline andersonjk4

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2010
  • Posts: 987
  • Location: Spangle, WA
Re: Bullet Starter Advice
« Reply #2 on: September 26, 2020, 09:08:03 PM »
 :yeah:

I use a threaded jag designed for the tipped bullets on both my starter and my rod. But be careful, I had one that was supposed to be for tipped bullets but was the wrong shape and would dig into the tips and pull the bullets a little ways out of the sabot. Not good.

Offline elkboy

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Dec 2010
  • Posts: 1337
  • Location: Whitman County
Re: Bullet Starter Advice
« Reply #3 on: September 27, 2020, 08:07:17 PM »
One thought related to this topic is changes in the ease with which bullets/sabots can be started in the barrel.  I found, over several years of shooting two of my muzzleloaders, that starting and ramrodding bullets was getting harder and harder.  Sabotloader put me onto J-B Bore Paste, which is a micro-abrasive paste to clean years' worth of hard barrel fouling accumulation from your bore.  It has worked wonders for me, reducing the need to even use a bullet starter (I do have one). 

A small amount of the J-B bore paste should be smeared in the center of a lightly oiled patch, then scoured up and down the barrel about 20 times with a good ramrod or range rod.  Repeat if bore is severely fouled.  Cleanup of the bore is best done with 90% isopropyl alcohol.  Then, finish with your normal bore cleaning operation.  Maybe Sabotloader can correct my memories of the procedure he taught me, but this has worked so well to restore my bores to like they were on day of purchase.  Cheers, -M

Offline The Big Game Hunter

  • Business Sponsor
  • Trade Count: (0)
  • Hunter
  • *****
  • Join Date: Jul 2013
  • Posts: 249
    • https://www.facebook.com/biggamehuntingadventures
    • Big Game Hunting Adventures
  • Groups: SCI, RMEF
Re: Bullet Starter Advice
« Reply #4 on: December 17, 2020, 02:14:52 PM »
New muzzy this year, Knight Bighorn. They have came a long way from last I hunted with one 20 years ago. Anyone have experience with a ball/bullet starter damaging the polymer tips of Barnes bullets? I bought the Barnes jag for my rod, but I'm worried I may damage the tips getting them started.  Any advice/experience/recommendations for this? Thanks
I had this issue when i first got started shooting those Barnes bullets in my muzzleloader. Using the right jag immediately fixed the problem and I haven't had any issues since.

Offline huntnfmly

  • Political Topics
  • Trade Count: (+20)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3708
Re: Bullet Starter Advice
« Reply #5 on: December 17, 2020, 02:28:21 PM »
Same as already mentioned we use the screw on jag for those
I'm your dam tour guide Arnie please donít wonder off the dam tour.
Take as many dam pictures as you want ....
Are there any dam questions ..

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+15)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 3044
  • Location: Wet side
Re: Bullet Starter Advice
« Reply #6 on: December 17, 2020, 04:39:51 PM »
Use a 5N1 speed loader itís got the starter built in

Offline 10thmountainarcher

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 761
  • Location: Buckley
Re: Bullet Starter Advice
« Reply #7 on: December 17, 2020, 04:52:15 PM »
I shoot Hornady ssts and have never used a bullet starter with them, with that said I had concerns about the tip being damaged while loading. I pushed one out after being loaded and there was zero damage.

Offline LDennis24

  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2010
  • Posts: 1381
  • Location: Revere
Re: Bullet Starter Advice
« Reply #8 on: December 17, 2020, 05:23:40 PM »
I use the copper jacketed Hornadys with a red polymer tip and most of the time it comes out with my starter or rod end stuck in the tiny hole. Never affected the shot. Just made it a hollow point
« Last Edit: December 17, 2020, 05:54:20 PM by LDennis24 »

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+115)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 27157
  • Location: Goldendale,WA
Re: Bullet Starter Advice
« Reply #9 on: December 17, 2020, 05:47:59 PM »
I'm with most the crowd. I use barnes bullets and I run their jag on starter and ram rod.
My new 700 this year has a good open style jag on it so didn't have to add that to that gun, but have done so to all my others.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline Wanttohuntmore

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1651
Re: Bullet Starter Advice
« Reply #10 on: December 18, 2020, 07:10:32 AM »
On a related note,  does anyone make a starter jag for polymer tips that also can be used for patches (knurled on the sides so they grab the patch)?  I like to run a few patches down the bore between shots,  in the field.   The Ssts fit so darn tight.

Online M_ray

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Oct 2007
  • Posts: 4406
  • Location: I'm takin the 5th on this one
Re: Bullet Starter Advice
« Reply #11 on: January 06, 2021, 07:30:03 PM »
My ram rod was damaging the tips of My TC shockwave bullets.  I use a speed loader with starter and it wasnít pulling them off but the threads left deep scratches in the tip. Never affected my groups but I corrected it by just screwing in a small jag that protects the tips from the threads now.
DISCLAIMER: The opinions expressed here are not those of HW Management, Admins, Mods or Myself... But they are the opinions of Elvis who has revealed them to me through the medium of my pet hamster, Lee Harvey Oswald...


MB

Growing old is mandatory ... Growing up is optional!

Offline jjhunter

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jul 2008
  • Posts: 1981
  • Location: Mule Deer Country
  • Aim small. Miss small.
Re: Bullet Starter Advice
« Reply #12 on: January 06, 2021, 08:34:27 PM »
I shoot lead powerbelts and donít need a starter.  Let the flogging begin.  :chuckle:

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+115)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 27157
  • Location: Goldendale,WA
Re: Bullet Starter Advice
« Reply #13 on: January 06, 2021, 09:42:30 PM »
I shoot lead powerbelts and donít need a starter.  Let the flogging begin.  :chuckle:


So you like syrup with those pancakes :chuckle: Sorry man had to :chuckle:
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Online M_ray

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Oct 2007
  • Posts: 4406
  • Location: I'm takin the 5th on this one
Re: Bullet Starter Advice
« Reply #14 on: January 07, 2021, 11:01:21 AM »
I shoot lead powerbelts and donít need a starter.  Let the flogging begin.  :chuckle:


So you like syrup with those pancakes :chuckle: Sorry man had to :chuckle:

He also likes pink hats and rainbow skirts  :chuckle:

JK

In all seriousness if you can get Powerbelts to group, then good for you. I was never happy with the occasional flyer that would be 6 ď off. Could never figure out why but I suspect because they are so easy to load they arenít seated very good in the barrel and therefore you are going to get the occasional tumbling flyer. Never get that with TC shockwaves or knight full lead conicals both have sabots.

Oh also Iím glad I stayed away from them because in Oregon the law is written that your bullet may NOT have a plastic base attached or otherwise.
DISCLAIMER: The opinions expressed here are not those of HW Management, Admins, Mods or Myself... But they are the opinions of Elvis who has revealed them to me through the medium of my pet hamster, Lee Harvey Oswald...


MB

Growing old is mandatory ... Growing up is optional!

 


* Advertisement

* Recent Topics

How do I change my username? by Rainier10
[Today at 08:48:27 AM]


Bottom metal for Remington LA by Kauaiian
[Today at 08:44:00 AM]


Chiwawa quality rifle tag by lemondog
[Today at 08:42:31 AM]


Looking for advice on 11 1/2 ft Artic Fox camper by Angry Perch
[Today at 08:40:11 AM]


Alaska Bucket List Hunt #1 by ShaneTyTrey
[Today at 08:17:50 AM]


Thieving Rat *censored*s!!! by GWP
[Today at 08:14:47 AM]


Game Cart by RightPlace-RightTime
[Today at 08:00:01 AM]


Sinlahekin Quality Deer by Southpole
[Today at 07:44:53 AM]


200 rounds of 10 mm ammo LAX brand factory new 180 gr copper plated $200 by nicz
[Today at 07:41:52 AM]


Vortex impact 1000 rangefinder - new -$200 by nicz
[Today at 07:41:21 AM]


Quality elk tags check in here! by Elkterd
[Today at 07:23:35 AM]


FS: Garage Sale - Various Items by silverdalesauer
[Today at 07:16:42 AM]


Mayview Buck Tag, anyone hunt with Deadman Creek Outfitters? by ELKBURGER
[Today at 06:48:15 AM]


BACON!!! by trophyhunt
[Today at 06:47:17 AM]


For sale: Winchester M70 Westerner 7mm Rem Mag by MeatMissile
[Today at 06:45:26 AM]


Boat net storage by blackpowderhunter
[Today at 06:45:05 AM]


2021 OIL Tags by Rob
[Today at 06:42:52 AM]


What is considered bait? by Alan K
[Today at 06:15:55 AM]


Help me pick a new deer rifle by jasnt
[Today at 06:15:01 AM]


Jet Pro 10 table saw by RightPlace-RightTime
[Today at 06:09:47 AM]