collapse

Advertisement


Author Topic: Rendered Bear Grease  (Read 1437 times)

Offline jrebel

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2008
  • Posts: 7787
  • Location: East Wenatchee
Rendered Bear Grease
« on: October 21, 2020, 05:26:17 PM »
For those on the fence.......rendering your bear fat to make lard / bear grease is easy and super amazing.  I have been waiting to kill a bear with enough fat to make it worth my time.  Well this year I did just that.  I rendered the fat and have about 12 pints of the whitest grease a person could ask for.  I have used it to cook with and thus far no one in my family has complained.  I use it in my cast iron pans to cook up deer tenderloin and........it was mouth watering good.   :drool: :drool: :drool:   

Absolutely no game flavor or smell.  If anything it smells a little like the wild plums the bear had been eating...a slight sweet smell to it.  I will be doing this with every bear I kill that has a decent amount of fat. 

How I did it for those on that want to try. 

1.  cut all the clean fat off the bear while butchering.  No blood shot fat, no hair, no anything nasty. 
2.  Trim as much meat off fat.
3.  Put fat in freezer / fridge to harden a little.
4.  Grind fat through grinder once.
5.  In a pot big enough for all the fat, ad 1/2 cut of water and start warming on the lowest setting your stove top has. 
6.  Add about a cup of ground fat to the pot and let it start to render.  When it starts to liquify, add additional fat and stir. 
7.  Stir occasionally and let the fat render.  This will literally take hours.  Mine took 7-8 hours before it started to bubble just a little bit. 
8.  Strain through three layers of cheesecloth into jars you want to store grease in. 
9.  Let it cool, put a lid on it and store in a freezer. 

The video I watched and learned from was using leaf lard from a pig.  It recommended the low and slow method over faster to keep the color bright white and not burn the lard causing it to turn colors.  I may try a little warmer burner next time.....but definitely not to warm.  I don't want it to ever boil or turn brown.  The video stated the leaf lard from a pig has more Omega 3 fatty acids that fish when done on low heat.....not sure if the applies to a bear. 

Everyone needs to do this.....it really is amazing and very easy. 

Offline callturner

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2020
  • Posts: 176
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Rendered Bear Grease
« Reply #1 on: October 21, 2020, 05:55:08 PM »
I use the same process without grinding it.

Offline Skywagon_185

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Oct 2009
  • Posts: 80
  • Location: Lewis River country
Re: Rendered Bear Grease
« Reply #2 on: October 21, 2020, 07:38:30 PM »
Bear grease makes the  very best boot grease that exists!!  Mix with equal parts of beeswax, neatsfoot oil and bear grease and apply warm.  Excellent waterproofing.  My mom claimed it was also the best fat to use for piecrusts.  Ya,  I'm an old timer. Pure pork lard is a close second.
Mike

Offline h3x0ctb1n

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Sep 2020
  • Posts: 39
  • Location: Everett
  • Groups: NRA, RMEF, BHA, MDF
Re: Rendered Bear Grease
« Reply #3 on: October 21, 2020, 07:57:55 PM »
Want to do this so bad! I need a bear first...

Offline Sutherland

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2018
  • Posts: 553
  • Location: East Wenatchee
Re: Rendered Bear Grease
« Reply #4 on: October 21, 2020, 08:02:04 PM »
That sounds amazing I must try this is I can get the time to find a bear this year! Thanks for the detailed instructions Jreble!

Offline callturner

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2020
  • Posts: 176
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Rendered Bear Grease
« Reply #5 on: October 21, 2020, 08:05:47 PM »
Bear grease makes the  very best boot grease that exists!!  Mix with equal parts of beeswax, neatsfoot oil and bear grease and apply warm.  Excellent waterproofing.  My mom claimed it was also the best fat to use for piecrusts.  Ya,  I'm an old timer. Pure pork lard is a close second.
Mike
Mixed right it also makes an awesome bullet lube! :chuckle:

Offline lokidog

  • Global Moderator
  • Trade Count: (+5)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 14821
  • Location: Decatur Island/Sultan
Re: Rendered Bear Grease
« Reply #6 on: October 21, 2020, 11:08:59 PM »
I didn't grind mine, diced to about 1/4 by 1/2 inch. I didn't use water either, maybe goes faster? I just cooked slow until it quit bubbling, no moisture left in the fat.

The chitlins make great doggy treats also.

Still looking forward to making a pie crust with it.

Offline jrebel

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2008
  • Posts: 7787
  • Location: East Wenatchee
Re: Rendered Bear Grease
« Reply #7 on: October 22, 2020, 06:17:24 AM »
I didn't grind mine, diced to about 1/4 by 1/2 inch. I didn't use water either, maybe goes faster? I just cooked slow until it quit bubbling, no moisture left in the fat.

The chitlins make great doggy treats also.

Still looking forward to making a pie crust with it.

I didnít get any chitlins.....I has a mushy pulp that I strained off.   I thought it may be contributed to my grinding method.. :dunno:   I wonder if that pulp would have crisped up with hotter temps??   

Offline huntnnw

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2010
  • Posts: 8045
  • Location: Spokane
Re: Rendered Bear Grease
« Reply #8 on: October 22, 2020, 06:23:51 AM »
grind ours also, wife makes soap with it.

Offline lokidog

  • Global Moderator
  • Trade Count: (+5)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 14821
  • Location: Decatur Island/Sultan
Re: Rendered Bear Grease
« Reply #9 on: October 22, 2020, 10:54:37 AM »
I didn't grind mine, diced to about 1/4 by 1/2 inch. I didn't use water either, maybe goes faster? I just cooked slow until it quit bubbling, no moisture left in the fat.

The chitlins make great doggy treats also.

Still looking forward to making a pie crust with it.

I didnít get any chitlins.....I has a mushy pulp that I strained off.   I thought it may be contributed to my grinding method.. :dunno:   I wonder if that pulp would have crisped up with hotter temps??

The chunks probably contributed to something more remaining. I just fried mine on low (still hot enough to fry) until all of the moisture was cooked out of them.  I did overheat one batch which ended up slightly brown, that was made into some wonderful soap.

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 3478
  • Location: PREDATOR PIT UNIT 121
Re: Rendered Bear Grease
« Reply #10 on: October 22, 2020, 11:15:06 AM »
My wife experimented with her large crock pot/slow cooker on low setting and now leaves it overnight and it turns out pure white nearly odorless.

Main stay for soap and baking for several years.

Offline jrebel

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2008
  • Posts: 7787
  • Location: East Wenatchee
Re: Rendered Bear Grease
« Reply #11 on: October 22, 2020, 11:19:36 AM »
My wife experimented with her large crock pot/slow cooker on low setting and now leaves it overnight and it turns out pure white nearly odorless.

Main stay for soap and baking for several years.

That's a great idea.  Does she leave the top to let the moisture evaporate?  I'm sure I could have left mine longer and maybe rendered a little more out of it....but it was bedtime, LOLOL. 


Offline KFhunter

  • Global Moderator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Jan 2011
  • Posts: 24141
  • Location: NE Corner
  • My posts do not reflect an official opinion of HW
Re: Rendered Bear Grease
« Reply #12 on: October 22, 2020, 11:57:38 AM »
Turkey roaster oven on the deck overnight.

I use those cheap 22 qt or so roaster ovens a lot!  I do my tomato sauce in them too, just cook hours and hours.


They also made liners for easy cleanup
A strong body makes the mind strong.  As to the species of exercises, I advise the gun. While this gives moderate exercise to the body, it gives boldness, enterprise and independence to the mind. Games played with the ball and others of that nature are too violent for the body and stamp no character on the mind. Let your gun therefore be your constant companion of your walks.
~Thomas Jefferson

Offline yakimanoob

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jun 2016
  • Posts: 1028
  • Location: Naches
Re: Rendered Bear Grease
« Reply #13 on: October 22, 2020, 12:28:41 PM »
Yeah!  We got a bear this year and I got all the fat I wanted to carry.  I should end up with about 8 qts, including my first batch which was a bit gamier than intended (I failed to trim enough meat off and also didn't grind it). 

Trimmed the meat off, partially froze then ground the fat, then let the crockpot on low work its magic for ~4 hours.  Voila! 

For those experimenting or concerned: my good batches still have a faint hint of gamey aroma to the fat itself, but once it gets warm there is ZERO aroma.  I make my living selecting coffees, at least partially on the aroma.  I'm not always the best at identifying what I'm smelling, but smelling something with no aroma at all is always a memorable experience. 

Hash browns cooked in bear fat are MAGICAL. 

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 3478
  • Location: PREDATOR PIT UNIT 121
Re: Rendered Bear Grease
« Reply #14 on: October 22, 2020, 01:28:03 PM »
My wife experimented with her large crock pot/slow cooker on low setting and now leaves it overnight and it turns out pure white nearly odorless.  She was doing bear fat when bear fat wasnt cool.   :chuckle:

Main stay for soap and baking for several years.

That's a great idea.  Does she leave the top to let the moisture evaporate?  I'm sure I could have left mine longer and maybe rendered a little more out of it....but it was bedtime, LOLOL.

Lids always on when I notice, but then again its her gig so I dont pay attention to details (other than delicious pie crust and pastries).   :dunno:  And incredible soap.

 


* Advertisement

* Recent Topics

Montana units next year by vandeman17
[Today at 02:40:52 AM]


WTT/WTS Black Cloud by vandeman17
[Today at 02:40:07 AM]


Cuga Vest - sold please remove by MLHSN
[Today at 01:25:55 AM]


WTB entry level compound bow by Huntnfish89
[Today at 12:05:13 AM]


Finally after 3 years by shootem
[Yesterday at 11:26:01 PM]


2020 elk harvest by SeatoSummit88
[Yesterday at 11:02:19 PM]


WTS- First Lite VAPOR stormlight jacket- brand new-$170 by BeWitty
[Yesterday at 10:09:05 PM]


Wts excellent hard to find win model 70 270 weatherby by wrchinook
[Yesterday at 10:01:36 PM]


WDFW Proposal to Eliminate Public Grazing Where Wolves Reside by Brad Harshman
[Yesterday at 09:55:43 PM]


Looking for a Classic? by AL WORRELLS KID
[Yesterday at 09:38:57 PM]


Suppressors by Special T
[Yesterday at 09:37:11 PM]


500 S&W Revolver by b23
[Yesterday at 09:33:42 PM]


Crispi Colorado size 10 by Rambo1969
[Yesterday at 09:23:25 PM]


Hanson Fish Co Winter Group Buy 2020 by RB
[Yesterday at 09:23:08 PM]


Fins or Fur by Camo
[Yesterday at 09:11:22 PM]


Looking to trade for some once fired 6.5 Grendel brass by Missing
[Yesterday at 09:02:35 PM]


DNR needs to fix ther mess by Buckhunter24
[Yesterday at 08:54:16 PM]


6th Annual - 2020 YOUTH TURKEY HUNT CONTEST (enter by Mar 15) by stickbuck
[Yesterday at 08:45:52 PM]


Trade/Co-op reloading stuff by JJB11B
[Yesterday at 08:45:05 PM]


WTB 2 burner propane camping stove by erk444
[Yesterday at 08:43:35 PM]