collapse

Advertisement


Author Topic: Rendered Bear Grease  (Read 3023 times)

Offline jrebel

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+12)
  • Old Salt
  • ******
  • Join Date: Feb 2008
  • Posts: 8216
  • Location: East Wenatchee
Rendered Bear Grease
« on: October 21, 2020, 05:26:17 PM »
For those on the fence.......rendering your bear fat to make lard / bear grease is easy and super amazing.  I have been waiting to kill a bear with enough fat to make it worth my time.  Well this year I did just that.  I rendered the fat and have about 12 pints of the whitest grease a person could ask for.  I have used it to cook with and thus far no one in my family has complained.  I use it in my cast iron pans to cook up deer tenderloin and........it was mouth watering good.   :drool: :drool: :drool:   

Absolutely no game flavor or smell.  If anything it smells a little like the wild plums the bear had been eating...a slight sweet smell to it.  I will be doing this with every bear I kill that has a decent amount of fat. 

How I did it for those on that want to try. 

1.  cut all the clean fat off the bear while butchering.  No blood shot fat, no hair, no anything nasty. 
2.  Trim as much meat off fat.
3.  Put fat in freezer / fridge to harden a little.
4.  Grind fat through grinder once.
5.  In a pot big enough for all the fat, ad 1/2 cut of water and start warming on the lowest setting your stove top has. 
6.  Add about a cup of ground fat to the pot and let it start to render.  When it starts to liquify, add additional fat and stir. 
7.  Stir occasionally and let the fat render.  This will literally take hours.  Mine took 7-8 hours before it started to bubble just a little bit. 
8.  Strain through three layers of cheesecloth into jars you want to store grease in. 
9.  Let it cool, put a lid on it and store in a freezer. 

The video I watched and learned from was using leaf lard from a pig.  It recommended the low and slow method over faster to keep the color bright white and not burn the lard causing it to turn colors.  I may try a little warmer burner next time.....but definitely not to warm.  I don't want it to ever boil or turn brown.  The video stated the leaf lard from a pig has more Omega 3 fatty acids that fish when done on low heat.....not sure if the applies to a bear. 

Everyone needs to do this.....it really is amazing and very easy. 

Offline callturner

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Jun 2020
  • Posts: 292
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Rendered Bear Grease
« Reply #1 on: October 21, 2020, 05:55:08 PM »
I use the same process without grinding it.

Offline Skywagon_185

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Oct 2009
  • Posts: 93
  • Location: Lewis River country
Re: Rendered Bear Grease
« Reply #2 on: October 21, 2020, 07:38:30 PM »
Bear grease makes the  very best boot grease that exists!!  Mix with equal parts of beeswax, neatsfoot oil and bear grease and apply warm.  Excellent waterproofing.  My mom claimed it was also the best fat to use for piecrusts.  Ya,  I'm an old timer. Pure pork lard is a close second.
Mike

Offline h3x0ctb1n

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Sep 2020
  • Posts: 43
  • Location: Everett
  • Groups: NRA, RMEF, BHA, MDF
Re: Rendered Bear Grease
« Reply #3 on: October 21, 2020, 07:57:55 PM »
Want to do this so bad! I need a bear first...

Offline Sutherland

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2018
  • Posts: 642
  • Location: East Wenatchee
Re: Rendered Bear Grease
« Reply #4 on: October 21, 2020, 08:02:04 PM »
That sounds amazing I must try this is I can get the time to find a bear this year! Thanks for the detailed instructions Jreble!

Offline callturner

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Jun 2020
  • Posts: 292
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Rendered Bear Grease
« Reply #5 on: October 21, 2020, 08:05:47 PM »
Bear grease makes the  very best boot grease that exists!!  Mix with equal parts of beeswax, neatsfoot oil and bear grease and apply warm.  Excellent waterproofing.  My mom claimed it was also the best fat to use for piecrusts.  Ya,  I'm an old timer. Pure pork lard is a close second.
Mike
Mixed right it also makes an awesome bullet lube! :chuckle:

Offline lokidog

  • Global Moderator
  • Trade Count: (+6)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 14873
  • Location: Decatur Island/Sultan
Re: Rendered Bear Grease
« Reply #6 on: October 21, 2020, 11:08:59 PM »
I didn't grind mine, diced to about 1/4 by 1/2 inch. I didn't use water either, maybe goes faster? I just cooked slow until it quit bubbling, no moisture left in the fat.

The chitlins make great doggy treats also.

Still looking forward to making a pie crust with it.

Offline jrebel

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+12)
  • Old Salt
  • ******
  • Join Date: Feb 2008
  • Posts: 8216
  • Location: East Wenatchee
Re: Rendered Bear Grease
« Reply #7 on: October 22, 2020, 06:17:24 AM »
I didn't grind mine, diced to about 1/4 by 1/2 inch. I didn't use water either, maybe goes faster? I just cooked slow until it quit bubbling, no moisture left in the fat.

The chitlins make great doggy treats also.

Still looking forward to making a pie crust with it.

I didnít get any chitlins.....I has a mushy pulp that I strained off.   I thought it may be contributed to my grinding method.. :dunno:   I wonder if that pulp would have crisped up with hotter temps??   

Offline huntnnw

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2010
  • Posts: 8155
  • Location: Spokane
Re: Rendered Bear Grease
« Reply #8 on: October 22, 2020, 06:23:51 AM »
grind ours also, wife makes soap with it.

Offline lokidog

  • Global Moderator
  • Trade Count: (+6)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 14873
  • Location: Decatur Island/Sultan
Re: Rendered Bear Grease
« Reply #9 on: October 22, 2020, 10:54:37 AM »
I didn't grind mine, diced to about 1/4 by 1/2 inch. I didn't use water either, maybe goes faster? I just cooked slow until it quit bubbling, no moisture left in the fat.

The chitlins make great doggy treats also.

Still looking forward to making a pie crust with it.

I didnít get any chitlins.....I has a mushy pulp that I strained off.   I thought it may be contributed to my grinding method.. :dunno:   I wonder if that pulp would have crisped up with hotter temps??

The chunks probably contributed to something more remaining. I just fried mine on low (still hot enough to fry) until all of the moisture was cooked out of them.  I did overheat one batch which ended up slightly brown, that was made into some wonderful soap.

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 3539
  • Location: PREDATOR PIT UNIT 121
Re: Rendered Bear Grease
« Reply #10 on: October 22, 2020, 11:15:06 AM »
My wife experimented with her large crock pot/slow cooker on low setting and now leaves it overnight and it turns out pure white nearly odorless.

Main stay for soap and baking for several years.

Offline jrebel

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+12)
  • Old Salt
  • ******
  • Join Date: Feb 2008
  • Posts: 8216
  • Location: East Wenatchee
Re: Rendered Bear Grease
« Reply #11 on: October 22, 2020, 11:19:36 AM »
My wife experimented with her large crock pot/slow cooker on low setting and now leaves it overnight and it turns out pure white nearly odorless.

Main stay for soap and baking for several years.

That's a great idea.  Does she leave the top to let the moisture evaporate?  I'm sure I could have left mine longer and maybe rendered a little more out of it....but it was bedtime, LOLOL. 


Offline KFhunter

  • Global Moderator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Jan 2011
  • Posts: 27002
  • Location: NE Corner
  • My posts do not reflect an official opinion of HW
Re: Rendered Bear Grease
« Reply #12 on: October 22, 2020, 11:57:38 AM »
Turkey roaster oven on the deck overnight.

I use those cheap 22 qt or so roaster ovens a lot!  I do my tomato sauce in them too, just cook hours and hours.


They also made liners for easy cleanup

Offline yakimanoob

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jun 2016
  • Posts: 1042
  • Location: Naches
Re: Rendered Bear Grease
« Reply #13 on: October 22, 2020, 12:28:41 PM »
Yeah!  We got a bear this year and I got all the fat I wanted to carry.  I should end up with about 8 qts, including my first batch which was a bit gamier than intended (I failed to trim enough meat off and also didn't grind it). 

Trimmed the meat off, partially froze then ground the fat, then let the crockpot on low work its magic for ~4 hours.  Voila! 

For those experimenting or concerned: my good batches still have a faint hint of gamey aroma to the fat itself, but once it gets warm there is ZERO aroma.  I make my living selecting coffees, at least partially on the aroma.  I'm not always the best at identifying what I'm smelling, but smelling something with no aroma at all is always a memorable experience. 

Hash browns cooked in bear fat are MAGICAL. 

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 3539
  • Location: PREDATOR PIT UNIT 121
Re: Rendered Bear Grease
« Reply #14 on: October 22, 2020, 01:28:03 PM »
My wife experimented with her large crock pot/slow cooker on low setting and now leaves it overnight and it turns out pure white nearly odorless.  She was doing bear fat when bear fat wasnt cool.   :chuckle:

Main stay for soap and baking for several years.

That's a great idea.  Does she leave the top to let the moisture evaporate?  I'm sure I could have left mine longer and maybe rendered a little more out of it....but it was bedtime, LOLOL.

Lids always on when I notice, but then again its her gig so I dont pay attention to details (other than delicious pie crust and pastries).   :dunno:  And incredible soap.

 


* Advertisement

* Recent Topics

Breeding female wolf illegally shot and killed in Stevens County by Goshawk
[Today at 10:22:28 PM]


Post The Ammo/Reloading Supplies You Find In Stock Here! by fowl smacker
[Today at 10:11:18 PM]


WTS or trade H4350,H1000, Retumbo and others by Frankoneal
[Today at 10:08:25 PM]


Youth muzzy cow by Rodney107
[Today at 10:05:45 PM]


Bearpaw Season - Spring 2021 by bearpaw
[Today at 10:04:04 PM]


The Boys by WyatBaker
[Today at 09:47:20 PM]


Year round Bull Elk season by Rainier10
[Today at 09:34:37 PM]


Free Primers From Pulled Down Ammo by R.hatchling
[Today at 09:33:43 PM]


FS akc silver lab pups by lewy
[Today at 09:13:19 PM]


Play Free: Hunting-Washington Monthly Lotto! by Gentrys
[Today at 09:10:09 PM]


Chiliwist quality buck by twright1991
[Today at 09:02:09 PM]


coeur d'alene kokanee by Utah
[Today at 08:44:38 PM]


AKC chocolate lab female by Wa hunter
[Today at 08:15:26 PM]


65 and over antlerless tag 49 degrees by Wizekrakr
[Today at 07:24:35 PM]


Snow and duck decoys by Jakobv
[Today at 07:22:33 PM]


FS Kimber 8400 Classic 7mm WSM by Shadrach71
[Today at 07:21:12 PM]


Coastal Roosevelt elk calling by Igottanewknee
[Today at 07:13:41 PM]


What is considered bait? by Stein
[Today at 06:52:49 PM]


Modern Firearm Blacktail GMU 621, 624, 627 by Phipps14
[Today at 06:38:22 PM]


Who else has a hot rod project? lets see em! by ASHQUACK
[Today at 06:13:24 PM]