collapse

Advertisement


Author Topic: Virgin brass vs. once fired  (Read 1708 times)

Online Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4821
  • Location: Puyallup
Virgin brass vs. once fired
« on: January 20, 2021, 01:33:12 PM »
So I developed a really good load while fire forming virgin brass.  It is shooting 1/4 Moa at 200.  Today I had reloaded 8 pieces, and shot the last 3 of virgin brass.

Virgin brass still holding 1/4 Moa.  Once fired reloads opened up to roughly 3/4 Moa. 

Virgin brass ES of 11 SD of 5.7
Reloads ES of 34 SD of 11.

Should I run another ladder over the chrono now that the case volume has changed from virgin to once fired?  Maybe the sweet spot powder charge has changed from virgin to once fired?  Just curious what might have opened up the load.

Offline birdshooter1189

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Nov 2013
  • Posts: 399
  • Location: Port Orchard
Re: Virgin brass vs. once fired
« Reply #1 on: January 20, 2021, 01:50:03 PM »
I have a hard time believing the case volume is changing enough to have any effect on velocity.

I would suspect it might have more to do with neck tension and the brass hardening or softening after being once fired.

Could also be your test batch size....perhaps the spread didn't show up in a 3 round string but it did show up in a 8 round string.

Other possibilities could be barrel heating up, or barrel getting dirty.

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12521
  • Location: Arlington
Re: Virgin brass vs. once fired
« Reply #2 on: January 20, 2021, 02:17:13 PM »
I haven't experienced that, I would try it again to verify it's the once fired issue and not something else.

Did you full length or neck resize?

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 648
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Virgin brass vs. once fired
« Reply #3 on: January 20, 2021, 02:20:22 PM »
 :yeah: Did you anneal your brass? Was it annealed before? What brand is it? Lots of variable's.

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4508
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Virgin brass vs. once fired
« Reply #4 on: January 20, 2021, 02:33:22 PM »
Did your average velocity remain the same ?  If not, match once fired velocity to virgin velocity.

Offline Buckjunkie

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 677
  • Groups: USMC Vet, NRA Life Member, SCI Life Member, WAFNAWS Life Member
Re: Virgin brass vs. once fired
« Reply #5 on: January 20, 2021, 03:14:49 PM »
I have several rifles that like (good quality) new brass and the rest don’t seem to care.

For this rifle, I would either shoot all virgin, or start over working up a load with 1x + fired brass.

Online Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4821
  • Location: Puyallup
Re: Virgin brass vs. once fired
« Reply #6 on: January 20, 2021, 04:16:10 PM »
Did your average velocity remain the same ?  If not, match once fired velocity to virgin velocity.

the reloads averaged 8fps faster than the virgin brass.  I would note that this round of shooting was about 50 fps slower than previous.  I assumed it might be because of the temp difference.  Guess I need to load another batch to figure out what is going on.  Everything is the same.

Online Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4821
  • Location: Puyallup
Re: Virgin brass vs. once fired
« Reply #7 on: January 20, 2021, 04:17:27 PM »
:yeah: Did you anneal your brass? Was it annealed before? What brand is it? Lots of variable's.

It is ADG brass, came looking as if annealed. I anneal every other firing so I have not cycled enough brass to anneal yet.  Next firing I will.

Online Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4821
  • Location: Puyallup
Re: Virgin brass vs. once fired
« Reply #8 on: January 20, 2021, 04:20:47 PM »
I haven't experienced that, I would try it again to verify it's the once fired issue and not something else.

Did you full length or neck resize?

I full length resize.  The groups are night and day from virgin to reloads.  The virgin brass might be less than 1/4 Moa it is shooting great at 200.  At 100, three shots are one hole.  the reloads are prob .75 Moa so I know it is not me.

Offline NWShooter

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2016
  • Posts: 239
  • Location: Oregon
  • Groups: RockyMountain Elk foundation, Mule Deer Foundation, NRA.
Re: Virgin brass vs. once fired
« Reply #9 on: January 20, 2021, 08:37:43 PM »
Fairly simple. Shoot “Virgin” brass. Next would be to work on the shoulder bump as per the chamber dimension.
A empty vessel makes the most noise.

"Every normal man must be tempted , at times, to spit on his hands, hoist the black flag, and begin slitting throats."

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Virgin brass vs. once fired
« Reply #10 on: January 20, 2021, 08:48:35 PM »
Yup can be frustrating.  Have a 338-378 that with virgin brass I just have to fill with powder,  stuff bullet in and shoots 1/2 moa out to 1000 yards.  Difficult to match with resized brass tho tried many ladders, loads, tensions and annealing every time.  Took 3 different dies before I found one and a load that matches virgin accuracy.   Its a hunting rifle so I just use virgin brass.

Offline bugs n bones

  • Business Sponsor
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2011
  • Posts: 1056
  • Location: north bend
  • Groups: WSTA, NRA, SCI
Re: Virgin brass vs. once fired
« Reply #11 on: January 20, 2021, 09:00:05 PM »
Long story short... if your brass is fire formed in your weapons chamber , you then neck size only second go around . 99.9 % time that always has a better group .

Online Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4821
  • Location: Puyallup
Re: Virgin brass vs. once fired
« Reply #12 on: January 20, 2021, 09:03:18 PM »
Fairly simple. Shoot “Virgin” brass. Next would be to work on the shoulder bump as per the chamber dimension.

I am only bumping the shoulders back 2 thou.

Online Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4821
  • Location: Puyallup
Re: Virgin brass vs. once fired
« Reply #13 on: January 20, 2021, 09:06:14 PM »
Yup can be frustrating.  Have a 338-378 that with virgin brass I just have to fill with powder,  stuff bullet in and shoots 1/2 moa out to 1000 yards.  Difficult to match with resized brass tho tried many ladders, loads, tensions and annealing every time.  Took 3 different dies before I found one and a load that matches virgin accuracy.   Its a hunting rifle so I just use virgin brass.

I loaded up another ladder.  The load in virgin brass is 67.6 grains of H1000. So I am starting at 67 and going to 68.5 in .3 steps.  Hope to find the "magic" again.

 


* Advertisement

* Recent Topics

Bearpaw Season - Spring 2024 by Machias
[Today at 09:19:44 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Walked a cougar down by 2MANY
[Today at 08:56:26 AM]


Springer 2024 Columbia River by WSU
[Today at 08:31:10 AM]


Average by lhrbull
[Today at 07:31:56 AM]


Let’s see your best Washington buck by Pathfinder101
[Today at 07:22:11 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal