collapse

Advertisement


Author Topic: Help with a resizing die.  (Read 426 times)

Offline TooTallMike

  • Trade Count: (+10)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 309
  • Location: JBLM
Help with a resizing die.
« on: January 22, 2021, 03:52:18 PM »
Alright everyone I'm working on loading up some ammo for a pre64 win model 70 in 338 win mag.

I have rcbs FL dies, .336 expander mandrel, and a belted magnum collet die to remove the bulge if any from above the belt on the case.

I load up about 15 rds that are middle of the pack when it comes to charge weights and fire them to get the chamber dimensions off the case with a comparator to reference how much I should bump the shoulder back in order to essentially headspace off the shoulder. Now the issue is my rcbs resizer die doesn't even touch the shoulder of the 1x fired cases.

Should I slap in I'ma grinder to shorten it so that it does?

I'd still be able to size the case body with the collet die.

Any suggestions or insight is appreciated. 

Offline Crunchy

  • Political Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4511
  • Location: Puyallup
Re: Help with a resizing die.
« Reply #1 on: January 22, 2021, 04:13:18 PM »
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass. 

Offline TooTallMike

  • Trade Count: (+10)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 309
  • Location: JBLM
Re: Help with a resizing die.
« Reply #2 on: January 22, 2021, 05:47:13 PM »
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass. 
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass.

It's not necessarily an issue with getting them to saami. It's an issue with bump sizing.

Are you sizing in reference to your fired case or just back to Saami?

Offline 300rum

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 2027
Re: Help with a resizing die.
« Reply #3 on: January 22, 2021, 06:09:56 PM »
Are you screwing the die down far enough?  It should "cam over" on the down stroke.  You should feel it. 

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4603
Re: Help with a resizing die.
« Reply #4 on: January 22, 2021, 07:04:32 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?


Offline TooTallMike

  • Trade Count: (+10)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 309
  • Location: JBLM
Re: Help with a resizing die.
« Reply #5 on: January 22, 2021, 07:05:06 PM »
Are you screwing the die down far enough?  It should "cam over" on the down stroke.  You should feel it.

It does screw all the way down and cams over but it doesn't change the shoulder dimensions of fired cases

Offline TooTallMike

  • Trade Count: (+10)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 309
  • Location: JBLM
Re: Help with a resizing die.
« Reply #6 on: January 22, 2021, 07:06:56 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?

I'm trying to bump size it off the shoulder to preserve brass life

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4603
Re: Help with a resizing die.
« Reply #7 on: January 22, 2021, 07:12:57 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?

I'm trying to bump size it off the shoulder to preserve brass life

The less you bump the longer it lasts.  With a light load and virgin brass it might not grow enough to even need or allow it to be bumped.   But usually dies allow brass to be bumped way more than you want.  Maybe you have a really short chamber ? 

Offline Reidus

  • Trade Count: (+10)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 846
  • Location: Tri-Cities
Re: Help with a resizing die.
« Reply #8 on: January 22, 2021, 08:37:22 PM »
If it goes back in the gun after sizing, I'd leave as is. When the brass gets tight in the gun and it still don't bump the shoulder, I'd grind some off the bottom of the die.

 


* Advertisement

* Recent Topics

FS/FT: 270 Winchester Ammo Lot by KM360
[Today at 10:17:18 PM]


FS .308 Trophy Grade Ammo by aorams
[Today at 09:48:52 PM]


BNIB Outdoor Research Foray Medium Coyote Brown $120 by aorams
[Today at 09:45:07 PM]


FS: Hogue Rubber Over Molded Stock for Ruger, 10-22 Standard by aorams
[Today at 09:43:43 PM]


Youth Weekend - Son's First Bird Ever by Dan-o
[Today at 09:42:27 PM]


FS: DNZ Game Reaper 1-Piece Scope Base with 1" Integral Rings Ruger 10/22 by aorams
[Today at 09:41:10 PM]


FS: Nikon Prostaff 4x32 Rimfire Scope by aorams
[Today at 09:35:11 PM]


Kitsap Meetup by TheStovePipeKid
[Today at 09:18:27 PM]


Any hunters in Gig harbor by fanatic291
[Today at 09:16:25 PM]


WTT S&B 30-06 by Dan-o
[Today at 09:02:33 PM]


Bearpaw Delivers Again.... by actionshooter
[Today at 09:01:23 PM]


Big Green Is Back by highside74
[Today at 08:56:42 PM]


WTB Non-toxic .223 ammo by konradcountry
[Today at 08:43:23 PM]


Missed op by lewy
[Today at 08:27:41 PM]


WDFW FIRST TURKEY CERTIFICATE? by WaltAlpine
[Today at 08:21:36 PM]


Tacoma temp gauge by jdb
[Today at 08:03:21 PM]


Guess the species and win a free book by Birdguy
[Today at 07:58:48 PM]


WTS 150 grain Hornady .308 bullets by swanderek
[Today at 07:12:40 PM]


Stud WA muley shed by Tbob
[Today at 07:12:37 PM]


Montana results??? by Tbob
[Today at 07:10:54 PM]