collapse

Advertisement


Author Topic: Help with a resizing die.  (Read 1577 times)

Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 399
  • Location: JBLM
Help with a resizing die.
« on: January 22, 2021, 03:52:18 PM »
Alright everyone I'm working on loading up some ammo for a pre64 win model 70 in 338 win mag.

I have rcbs FL dies, .336 expander mandrel, and a belted magnum collet die to remove the bulge if any from above the belt on the case.

I load up about 15 rds that are middle of the pack when it comes to charge weights and fire them to get the chamber dimensions off the case with a comparator to reference how much I should bump the shoulder back in order to essentially headspace off the shoulder. Now the issue is my rcbs resizer die doesn't even touch the shoulder of the 1x fired cases.

Should I slap in I'ma grinder to shorten it so that it does?

I'd still be able to size the case body with the collet die.

Any suggestions or insight is appreciated. 

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4961
  • Location: Puyallup
Re: Help with a resizing die.
« Reply #1 on: January 22, 2021, 04:13:18 PM »
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass. 

Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 399
  • Location: JBLM
Re: Help with a resizing die.
« Reply #2 on: January 22, 2021, 05:47:13 PM »
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass. 
Ive got the same gun in the same caliber.  Also use RCBS dies, but mine is a safe queen and Ive never noticed any issues with resizing the brass.

It's not necessarily an issue with getting them to saami. It's an issue with bump sizing.

Are you sizing in reference to your fired case or just back to Saami?

Offline 300rum

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 2357
Re: Help with a resizing die.
« Reply #3 on: January 22, 2021, 06:09:56 PM »
Are you screwing the die down far enough?  It should "cam over" on the down stroke.  You should feel it. 

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5605
Re: Help with a resizing die.
« Reply #4 on: January 22, 2021, 07:04:32 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?


Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 399
  • Location: JBLM
Re: Help with a resizing die.
« Reply #5 on: January 22, 2021, 07:05:06 PM »
Are you screwing the die down far enough?  It should "cam over" on the down stroke.  You should feel it.

It does screw all the way down and cams over but it doesn't change the shoulder dimensions of fired cases

Offline TooTallMike

  • Trade Count: (+13)
  • Scout
  • ****
  • Join Date: Oct 2019
  • Posts: 399
  • Location: JBLM
Re: Help with a resizing die.
« Reply #6 on: January 22, 2021, 07:06:56 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?

I'm trying to bump size it off the shoulder to preserve brass life

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5605
Re: Help with a resizing die.
« Reply #7 on: January 22, 2021, 07:12:57 PM »
Like said screw the die down, But If the brass chambers freely you don't need to worry about the shoulders.  Any resistance ?

I'm trying to bump size it off the shoulder to preserve brass life

The less you bump the longer it lasts.  With a light load and virgin brass it might not grow enough to even need or allow it to be bumped.   But usually dies allow brass to be bumped way more than you want.  Maybe you have a really short chamber ? 

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 879
  • Location: Tri-Cities
Re: Help with a resizing die.
« Reply #8 on: January 22, 2021, 08:37:22 PM »
If it goes back in the gun after sizing, I'd leave as is. When the brass gets tight in the gun and it still don't bump the shoulder, I'd grind some off the bottom of the die.

 


* Advertisement

* Recent Topics

8 year old attacked by ghosthunter
[Today at 08:17:36 PM]


Bonaparte Lake by elkaholic123
[Today at 08:15:57 PM]


Mt. St. Helens Goat by Jpmiller
[Today at 07:12:37 PM]


Live bait albacore charter by hiway_99
[Today at 07:10:28 PM]


Seeking packer OnCall for early archery unit 328 Naneum/Colockum by teanawayslayer
[Today at 06:53:06 PM]


Surprise quality deer tag by Gentrys
[Today at 06:01:07 PM]


Antelope next year? by Stein
[Today at 05:52:08 PM]


New to bear hunting by ZaneHunts
[Today at 05:35:10 PM]


Area 11 2025 - Well? by Crunchy
[Today at 05:07:01 PM]


Idaho unit 5 2025. Nov-ish by leonpeon2
[Today at 03:42:59 PM]


2025 Area 9 King Opener by CP
[Today at 03:00:27 PM]


3 pintails by hdshot
[Today at 02:16:04 PM]


Good day of steelhead fishing! by HntnFsh
[Today at 01:25:22 PM]


Best all around muzzy (updated) by crabcreekhunter
[Today at 12:43:44 PM]


Pocket Carry by jackelope
[Today at 10:59:06 AM]


Looking for italian sausage recipe by Dhoey07
[Today at 09:12:39 AM]


A little Martini Cadet varmint rifle I have been working on by JDHasty
[Yesterday at 08:26:39 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 07:39:21 PM]


Triple Blacktail Pedestal by blackveltbowhunter
[Yesterday at 05:35:41 PM]


Tasty Pinks! by pianoman9701
[Yesterday at 04:16:01 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal