collapse

Advertisement


Author Topic: Split Case neck (Reloading Advise)  (Read 1224 times)

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Split Case neck (Reloading Advise)
« on: March 04, 2021, 12:04:08 PM »
So went out for some target practice this mourning.
I only shot 12 times ,3 out of 12 had split case neck .
No sticky bolt or primers signs of pressure.
Brass has been reloaded 5+ times with no annealing.
Load is over max in reloading book. But never got split cases before.
Just looking for advise,groups seemed decent and not really look in to change it. Thinking my brass might just be brittle.

Any thoughts.
I rather piss in the wind,then have piss down my back.

Offline MountainWalk

  • "Pa Nevermissashot"
  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Mar 2008
  • Posts: 3083
  • Location: Afognak, POW, Kodiak, Quilcene
  • High lead logger/ cutter
Re: Split Case neck (Reloading Advise)
« Reply #1 on: March 04, 2021, 12:09:48 PM »
Full length or neck size? Measuring your cases once sized?
The way that you wander, is the way that you choose
The day that you tarry, is the day that you lose

Online jrebel

  • Non-Hunting Topics
  • Trade Count: (+20)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 10602
  • Location: East Wenatchee
Re: Split Case neck (Reloading Advise)
« Reply #2 on: March 04, 2021, 12:13:47 PM »
What caliber and how much over max are you?   5 times without annealing could be the answer especially with a hot load.

Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+14)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8057
Re: Split Case neck (Reloading Advise)
« Reply #3 on: March 04, 2021, 12:14:13 PM »
Split neck wont have anything to do with pressure. Its from cycles of shooting and sizing. The rest of that lot is likely near splitting also.

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Split Case neck (Reloading Advise)
« Reply #4 on: March 04, 2021, 12:15:00 PM »
7mm mag
63 grains of hybrid v 100
162 sst
Full length resize

Lee reloading manuals says 60 grain max
Hodgdon says 58 grain is max.
My load would be max if I was using a 140 grain bullet.
Cronograph loads last trip. Was 62.5 grains ,MV 2970.
Didn't crono this time thought 63 grain would put me right at 3000 MV or close enough.
Group I got today was right at 1in moa at 100 ,just a budget 783 remington.
« Last Edit: March 04, 2021, 12:24:23 PM by hunter399 »
I rather piss in the wind,then have piss down my back.

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Split Case neck (Reloading Advise)
« Reply #5 on: March 04, 2021, 12:17:41 PM »
Split neck wont have anything to do with pressure. Its from cycles of shooting and sizing. The rest of that lot is likely near splitting also.
Ya that what I was thinking also.
Thanks for reply.
I have some new brass .
That brass might be at the end of its days.
I rather piss in the wind,then have piss down my back.

Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+14)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8057
Re: Split Case neck (Reloading Advise)
« Reply #6 on: March 04, 2021, 12:19:58 PM »
You might be able to salvage what hasnt split if you anneal it. But if its already started to deform it might be too far gone.
Your rifles chamber neck is likely just a bit big, your sizing die a bit small or a combination of both.

Offline HighlandLofts

  • Business Sponsor
  • Trade Count: (+19)
  • Sourdough
  • *****
  • Join Date: Mar 2013
  • Posts: 1034
  • Location: North Snohomish County
  • Groups: WAC,
Re: Split Case neck (Reloading Advise)
« Reply #7 on: March 04, 2021, 12:24:38 PM »
Bottle neck cases do get brittle from being woked. With all that preasure you are doing good with the rounds used.
WAC
NRA
Walk Light, Carry A Big Stick, Never Walk Away. - Teddy Roosevelt
Don't Take Your Guns To Town.   Johnny Cash

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Split Case neck (Reloading Advise)
« Reply #8 on: March 04, 2021, 12:32:19 PM »
Here's a pic of the cases.
And the steel plate been getting hammered lately.
« Last Edit: March 04, 2021, 12:53:41 PM by hunter399 »
I rather piss in the wind,then have piss down my back.

Offline Nimrod

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Sep 2010
  • Posts: 154
Re: Split Case neck (Reloading Advise)
« Reply #9 on: March 08, 2021, 08:55:58 AM »
Let’s see the primer and

Offline BigGoonTuna

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 2375
  • Location: Yelm
Re: Split Case neck (Reloading Advise)
« Reply #10 on: March 08, 2021, 10:42:52 AM »
I had a batch of starline  7.62x39 that split just sitting on the shelf. This was virgin brass that I ran through a sizing die and loaded. Only thing I can think of is that it may not have been annealed at all.
you can still get gas in heaven, and a drink in kingdom come,
in the meantime, i'll be cleaning my gun

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Split Case neck (Reloading Advise)
« Reply #11 on: March 08, 2021, 10:55:15 AM »
I just got done with annealing all of my old cases.
There is no doubt that they are flattened a little.
63 grains is what I'm calling max for my rifle.
And not advise or to be used in any other rifle.
I rather piss in the wind,then have piss down my back.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Split Case neck (Reloading Advise)
« Reply #12 on: March 08, 2021, 11:35:09 AM »
What is size of fired case neck vs loaded ?

Guessing its over .005 and with 5 cycles needed annealing.

Had necks on 338-378 crack on 3rd cycle even.
« Last Edit: March 08, 2021, 12:52:39 PM by Magnum_Willys »

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 7662
  • Location: In Your Hunting Spot
  • If you know me,then you know I give zero #&$@$
  • Groups: NRA RMEF
Re: Split Case neck (Reloading Advise)
« Reply #13 on: March 08, 2021, 11:47:36 AM »
I guess I should check that.
There outside shaking around in walnut media.
I will have to get back on that one.
I will measure and repost.
It sounds like I need to keep better track of how many reloads on brass.
This is first time it ever happened to me .
I rather piss in the wind,then have piss down my back.

 


* Advertisement

* Recent Topics

Springer Fishing Opportunity 3/29 & 3/30 by Blacklab
[Today at 12:48:56 PM]


Long Beach Clamming Tides by dilleytech
[Today at 12:39:19 PM]


Let’s see your best Washington buck by abhold87
[Today at 12:03:27 PM]


Bearpaw Season - Spring 2024 by bearpaw
[Today at 11:45:41 AM]


Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Springer 2024 Columbia River by WSU
[Today at 08:31:10 AM]


Average by lhrbull
[Today at 07:31:56 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal