collapse

Advertisement


Author Topic: Is Anyone Loading Their Own 10MM??  (Read 2565 times)

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 5378
  • Location: Olympia
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Is Anyone Loading Their Own 10MM??
« Reply #15 on: August 14, 2021, 10:21:07 AM »
I like the 200gr bullet from Montana Bullet Works over Alliant 2400. I've shot this combo in a few different 10mm pistols with good results. Start at 9.5gr and work up until the gun tells you to stop. I'm at 1275fps with 11.5gr of 2400 in a 5" Kimber with a 22# variable weight recoil spring, 28# hammer spring, and a flat-bottom firing pin stop. I don't know if I'd go that high in a Glock or other stock pistol though.

https://www.montanabulletworks.com/product/10mm-noe-200gr-wfn-pb/

I am looking at those... probably will be the way I go but have you ever tried the 220s? I have not been able to figure out who is making them.
Rainier Arms Shooting Team
Rainier Arms, Fortis Manufacturing, Timney Triggers
Vortex Optics, Viking Tactics, Sporting Systems Vancouver

Offline yorketransport

  • Business Sponsor
  • Trade Count: (+10)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3300
  • Location: Yelm
  • I'm sorry, it's my fault I'll try harder next time
    • https://www.facebook.com/scapegoatenterprises/
    • Scapegoat Enterprises
Re: Is Anyone Loading Their Own 10MM??
« Reply #16 on: August 15, 2021, 04:26:24 PM »
I played with the Cast Performance 220gr in both of my 10ís and wasnít happy with them. They never penetrated in a straight line, always veering off course a couple inches into whatever I was shooting. The 220s are ridiculously long and I donít think most guns are properly stabilizing them. I think I have a couple hundred of the 220 on my shelf if you want to try some.

For comparison, these are unfired and recovered bullets shot into 20% gel blocks. Thatís a 200gr from Montana Bullet Works, a 152gr bullet I had Hammer make for me, the Cast Performance 220gr and a 180gr XTP.
Scapegoat Enterprises Custom Shirts and Decals

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 5378
  • Location: Olympia
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Is Anyone Loading Their Own 10MM??
« Reply #17 on: September 21, 2021, 09:28:22 PM »
OK, starting the load testing and am going to use Longshot (only powder I could find), 200gr Montana Hardcast, Starline Brass and winchester primers.... Has anyone used the Longshot for a similar load?   I'll post results soon.
BTW.... this will be in a G20
Rainier Arms Shooting Team
Rainier Arms, Fortis Manufacturing, Timney Triggers
Vortex Optics, Viking Tactics, Sporting Systems Vancouver

Offline dreadi

  • Business Sponsor
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2016
  • Posts: 532
  • Location: Tacoma
    • http://www.facebook.com/blackhammerarms
    • Black Hammer Arms
Re: Is Anyone Loading Their Own 10MM??
« Reply #18 on: December 15, 2021, 10:05:02 PM »
BLACK HAMMER ARMS
Buy A Suppressor http://www.silencershop.com/blackhammerarms
1911 Pistolsmithing
Firearm Refinishing
GLOCK Certified Armorer
CMMG Authorized Dealer
NEMO Arms Authorized Dealer
http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms/

Online duckmen1

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 2003
  • Location: outdoors
Re: Is Anyone Loading Their Own 10MM??
« Reply #19 on: December 15, 2021, 10:59:23 PM »
If any 10mm brass is needed feel free to pm me and I will get you some details on what I have for a bit more reasonable price then you will find it for elsewhere. I have a fair amount.
Live a lifetime of example and you see the whole picture. Hear spread gossip of the scenario doesn't make it true. Especially from the source it is coming from. Take a step back and see the big picture. It's obvious as to what is.

 


* Advertisement

* Recent Topics

WDFW facebook users in Skagit by RobinHoodlum
[Today at 09:12:53 AM]


What do you use to boil your heads? by Magnum_Willys
[Today at 09:08:15 AM]


Ithaca Mag 10 Deluxe by rainshadow1
[Today at 09:03:55 AM]


Thieves by KFhunter
[Today at 08:55:05 AM]


Comment on HB 1718 bill to outlaw fur farms by Katalla
[Today at 08:37:39 AM]


mec 9000G12 shotgun reloader WTS by BigBullDreamer11
[Today at 08:18:32 AM]


RCBS/Ohaus 10-10 Scale/RCBS Trim Pro by Forks
[Today at 06:51:29 AM]


Two Young Beagles--- Hunting Buddies by buckcanyonlodge
[Today at 05:38:58 AM]


WTS 10-22 stock by Tbar
[Yesterday at 09:11:42 PM]


Predator Masters by Threewolves
[Yesterday at 08:50:46 PM]


Goose Pastrami by greenhead_killer
[Yesterday at 08:16:17 PM]


WTT/WTS Primos alpha dogg by raydog
[Yesterday at 08:03:23 PM]


Wtb Imr 4198 by Cfcarpenter
[Yesterday at 06:32:37 PM]


WTS 16 gauge Federal Steel shot by Streamer
[Yesterday at 06:31:35 PM]


Local Tannery? by HntnFsh
[Yesterday at 05:45:35 PM]


Mountain marten line by wadu1
[Yesterday at 05:41:38 PM]


FS: Nightforce SHV 4-14x56 illuminated by jrebel
[Yesterday at 05:06:29 PM]

SimplePortal 2.3.7 © 2008-2022, SimplePortal