collapse

Advertisement


Author Topic: RWS No. 55 caps?  (Read 1451 times)

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 5657
  • Location: Toledo
RWS No. 55 caps?
« on: August 04, 2022, 08:27:17 PM »
Does anybody know anything about these caps.The only thing I can find is that they are the same diameter as the No. 11s but with a longer skirt.

Curious how the compare to the No. 11s as far as how hot they are and how waterproof they are. Also wondering if anybody has tried them in their muzzleloader

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2308
  • Location: Idaho, Northern
Re: RWS No. 55 caps?
« Reply #1 on: August 05, 2022, 12:42:13 AM »
This is what I found

SKU 033452
RWS 1055 no.55 Percussion Caps

RWS 1055 No.55 long percussion caps. Suitable for black powder percussion rifles and shotguns. Diameter same as no.11 caps but with a longer skirt. Not normally suitable for revolvers. These percussion caps are packed in a 100 count tins.
Keep shooting muzzleloaders - They are a blast!!

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 5657
  • Location: Toledo
Re: RWS No. 55 caps?
« Reply #2 on: August 05, 2022, 04:58:36 AM »
Thanks for the input. I found that also. But haven't been able to find anything else. I'm hoping their as hot and waterproof as the 1075s.
I have a tin of them and don't remember where I even got them.

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2308
  • Location: Idaho, Northern
Re: RWS No. 55 caps?
« Reply #3 on: August 05, 2022, 07:35:11 AM »
Thanks for the input. I found that also. But haven't been able to find anything else. I'm hoping their as hot and waterproof as the 1075s.
I have a tin of them and don't remember where I even got them.

Temp wise I think there is a good possibility that they are the same as the 1075+.  But I am a bit worried about the increased length of the squirt possibly interring with the correct crush of the cap.  Most #11 nipple posts are or have tapered structure to them.  If the taper causes the cap not to push down all the way onto the nipple it could be a problem.  I really would suggest placing the nipple on the post with a capper that allows you to really push with pressure to ensure the cap is tightly seated.

Then again... giving RWS credit they might know exactly what they built.  Wish I had some to try - but until this post I didn't know they even existed. If you got them I sure would shoot some.

One thing once installed - the only way you might get them off is to shoot them off or peel them off with the edge of a Knife blade.



Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

Didn't draw again 🤣 by MADMAX
[Today at 02:38:02 PM]


2024 Special Permit Draw Results by elkrack
[Today at 02:37:43 PM]


Bearpaw Season - Spring 2024 by Twispriver
[Today at 02:35:32 PM]


WDFW Commission Cancels 2024 Special Permits by Chris57
[Today at 02:13:03 PM]


some special hunts results posted in the WDFW account by lazydrifter
[Today at 02:06:03 PM]


Cougar Tips by nicz
[Today at 01:51:14 PM]


Can not posses a rifle while bow hunting? by steeleywhopper
[Today at 01:47:55 PM]


Idaho moose, sheep, mountain goat by kentrek
[Today at 01:44:49 PM]


Broadhead weight by Dreaded Archer24
[Today at 01:38:39 PM]


One of the lucky ones- 108 Douglas Bull Moose by jae
[Today at 01:38:30 PM]


Limited Entry notification by nicz
[Today at 01:17:32 PM]


2024 Trips by dylanb
[Today at 01:02:04 PM]


3D Shoot in Eastern Washington? by DWAT
[Today at 12:44:09 PM]


Oregon results posted. by Trooper
[Today at 12:30:51 PM]


Garmin InReach Minis by meat_in_the_pot3
[Today at 11:45:18 AM]


MA10 launches by metlhead
[Today at 11:25:02 AM]


Idaho Special Permits (deer, elk, antelope) by jowings22
[Today at 11:18:50 AM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal