collapse

Advertisement


Author Topic: Replacement Reeds for Duck Calls  (Read 1350 times)

Offline pickardjw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2019
  • Posts: 1457
  • Location: Pendleton, OR
Replacement Reeds for Duck Calls
« on: November 21, 2022, 05:30:42 PM »
Been experimenting with the length of the reed on my Phelps call and cut it too short. Where do y’all buy new reeds and are they somewhat universal between single reed calls? I have a JJ Lares as well that I’d like to experiment with different reed lengths on.

Also open to recommendations on a good wood call, family needs suggestions for Christmas!

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 648
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Replacement Reeds for Duck Calls
« Reply #1 on: November 21, 2022, 05:40:53 PM »
You can buy the mylar at a hobby shop or wal mart. If you send me your address in a pm, I can send you a small amount. I make calls.Mike

Offline fast60eddie

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2010
  • Posts: 430
Re: Replacement Reeds for Duck Calls
« Reply #2 on: November 21, 2022, 07:43:06 PM »
Once you find the right gauge of mylar try changing the width instead of length.
Fast60eddie

Offline goosegunner

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2008
  • Posts: 115
Re: Replacement Reeds for Duck Calls
« Reply #3 on: November 22, 2022, 06:33:52 AM »
 You can go to most of the popular call makers websites and most of them sell complete tuning kits, or atleast sell reds and corks. I know RNT, Bill Saunders and Born and Raised call company to name a few offer tuning supplies.

Offline pickardjw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2019
  • Posts: 1457
  • Location: Pendleton, OR
Re: Replacement Reeds for Duck Calls
« Reply #4 on: November 22, 2022, 08:25:20 AM »
Thanks callturner, I'll send a PM.

So on Mack's website I see a lot of different options. Any suggestions on where to start? I'm thinking this pack https://www.mackspw.com/J.J.-LARES-T1-REED?quantity=1&custcol_macks_calls_attributes=12

That doesn't appear to provide different thickness options though.

Offline JPhelps

  • I EAT ELK!!!
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Sep 2007
  • Posts: 2866
  • Location: Pe Ell
Re: Replacement Reeds for Duck Calls
« Reply #5 on: November 22, 2022, 08:52:00 AM »
Thanks callturner, I'll send a PM.

So on Mack's website I see a lot of different options. Any suggestions on where to start? I'm thinking this pack https://www.mackspw.com/J.J.-LARES-T1-REED?quantity=1&custcol_macks_calls_attributes=12

That doesn't appear to provide different thickness options though.

Get ahold of our Customer Service and we will get some headed you way  :tup:
info@phelpsgamecalls.com

Offline pickardjw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2019
  • Posts: 1457
  • Location: Pendleton, OR
Re: Replacement Reeds for Duck Calls
« Reply #6 on: November 22, 2022, 10:30:11 AM »
Thanks callturner, I'll send a PM.

So on Mack's website I see a lot of different options. Any suggestions on where to start? I'm thinking this pack https://www.mackspw.com/J.J.-LARES-T1-REED?quantity=1&custcol_macks_calls_attributes=12

That doesn't appear to provide different thickness options though.

Get ahold of our Customer Service and we will get some headed you way  :tup:
info@phelpsgamecalls.com

Awesome, thanks Jason. Email sent. That PD-1 has been my go-to next to the JJ.

Offline goosegunner

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2008
  • Posts: 115
Re: Replacement Reeds for Duck Calls
« Reply #7 on: November 22, 2022, 11:19:23 AM »
 which JJ lares call do you run? I run the T-1 with a 1.355 reed. i've ran that set up for 5 years now and love it. looks like macks is pretty picked over for there custom cut lares reeds. If you go to Upper duck . com they will have a better selection, or call Brett a Lares co and he will get you set up.

Offline pickardjw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2019
  • Posts: 1457
  • Location: Pendleton, OR
Re: Replacement Reeds for Duck Calls
« Reply #8 on: November 22, 2022, 11:29:58 AM »
which JJ lares call do you run? I run the T-1 with a 1.355 reed. i've ran that set up for 5 years now and love it. looks like macks is pretty picked over for there custom cut lares reeds. If you go to Upper duck . com they will have a better selection, or call Brett a Lares co and he will get you set up.

It's a Hybrid, the one linked below to be exact. I like the tone on it and will probably not mess with the stock reed but figure it might be fun to experiment a bit. Well, more fun for me than my neighbors :chuckle:

The Phelps PD-1 is the reed I really messed up. Sounds like a horse stepped on a duck more than anything.

https://www.cutemdownwaterfowl.com/products/game-calls/duck-calls/j-j-lares-hybrid-acrylic-mallard-duck-call-matte-amber-gray/
« Last Edit: November 22, 2022, 11:41:21 AM by pickardjw »

Offline goosegunner

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2008
  • Posts: 115
Re: Replacement Reeds for Duck Calls
« Reply #9 on: November 22, 2022, 02:29:16 PM »
 Thats the nice about the lares calls is they have all those custom reeds to try and see what fits you best. The shorter the reed the less air and higher pitched it will be, longer reed will be harder to blow and deeper.  do the same with your phelps get a bunch of reeds and just start cutting little bits a time  until you get dialed for you.

Offline pickardjw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2019
  • Posts: 1457
  • Location: Pendleton, OR
Re: Replacement Reeds for Duck Calls
« Reply #10 on: November 22, 2022, 05:19:23 PM »
@JPhelps can't say enough about your C/S department. Chris responded within a couple hours and I just received a tracking number. Top notch stuff, thanks again!

Offline JPhelps

  • I EAT ELK!!!
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Sep 2007
  • Posts: 2866
  • Location: Pe Ell
Re: Replacement Reeds for Duck Calls
« Reply #11 on: November 22, 2022, 06:02:11 PM »
@JPhelps can't say enough about your C/S department. Chris responded within a couple hours and I just received a tracking number. Top notch stuff, thanks again!

No problem. I sent two different length single reeds and a surprise  ;)

 


* Advertisement

* Recent Topics

Springer Fishing Opportunity 3/29 & 3/30 by xXLojackXx
[Today at 11:47:13 AM]


Bearpaw Season - Spring 2024 by bearpaw
[Today at 11:45:41 AM]


Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Springer 2024 Columbia River by WSU
[Today at 08:31:10 AM]


Average by lhrbull
[Today at 07:31:56 AM]


Let’s see your best Washington buck by Pathfinder101
[Today at 07:22:11 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal