collapse

Advertisement


Author Topic: Smoke house build  (Read 4211 times)

Offline 92xj

  • Trade Count: (+26)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3906
  • Location: Out of Place
  • Kill 'em
Smoke house build
« on: November 28, 2022, 09:17:43 AM »
I was able to find a few photos from the build.  Hopefully these help inspire you.
I do not have any measurements currently, but you can determine width and depth by the cinder blocks.
Note that in one of the build photos, I have three rows of blocks.  That was too tall.  I ended up using only two rows.
Also note that I do NOT use wood chips in the cast iron skillet anymore.  I use a pellet tube that I place in the air intake hole.  So much better as I do not have to open the door at all during the cooking process.
I could not find pictures of the exhaust holes but each hole has its own covering and I adjust those each to get it really dialed during a cook.
Anyhow, hopefully these photos will answer all the questions and PMs.
If not, ask away!










"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline 92xj

  • Trade Count: (+26)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3906
  • Location: Out of Place
  • Kill 'em
Re: Smoke house build
« Reply #1 on: November 28, 2022, 09:19:17 AM »
The sun really beats it up here so instead of staining each year, I just decided to burn the outside with a weed burner. 
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Ryans71

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: May 2011
  • Posts: 33
  • Location: Milton, Wa
Re: Smoke house build
« Reply #2 on: November 28, 2022, 11:49:26 AM »
That's awesome.  How long does a full smoker tube last?  Just wondering how often you'd need to refill it or do you have a second one?

Offline 92xj

  • Trade Count: (+26)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3906
  • Location: Out of Place
  • Kill 'em
Re: Smoke house build
« Reply #3 on: November 28, 2022, 11:54:11 AM »
That's awesome.  How long does a full smoker tube last?  Just wondering how often you'd need to refill it or do you have a second one?

It last about 2.5 hours.  And I only have one.  It takes one second to refill and get it going again.  I run smoke for only 5-7 hours of the cooking process.
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Ryans71

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: May 2011
  • Posts: 33
  • Location: Milton, Wa
Re: Smoke house build
« Reply #4 on: November 29, 2022, 11:30:24 AM »
That's awesome.  How long does a full smoker tube last?  Just wondering how often you'd need to refill it or do you have a second one?

It last about 2.5 hours.  And I only have one.  It takes one second to refill and get it going again.  I run smoke for only 5-7 hours of the cooking process.

Sounds good, thanks! 

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11759
  • Location: Southeast WA
  • Semper Primus
Re: Smoke house build
« Reply #5 on: November 29, 2022, 11:41:00 AM »
This is a really cool project.  One day your grandkids are going to talk about "this awesome smokehouse that my grampa had..."  :tup:
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Blacklab

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 7359
Re: Smoke house build
« Reply #6 on: November 30, 2022, 04:35:37 AM »
🤑🤑🤑

Thatís perfect size👍 great job. A buddy an I built one several years ago. Loved it just to big for personal use. Imo. Since moving last year. I need another smokehouse.
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Offline kball4

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Nov 2012
  • Posts: 446
  • Location: Kitsap County
  • Groups: RMEF, NRA
Re: Smoke house build
« Reply #7 on: November 30, 2022, 09:02:07 AM »
Are there any dampeners towards to top to let more smoke/heat escape or does it just go through the wood joints?

Offline pianoman9701

  • Mushroom Man
  • Business Sponsor
  • Trade Count: (+5)
  • Legend
  • *****
  • Join Date: Mar 2011
  • Posts: 43182
  • Location: Vancouver USA
  • WWC, NRA Life, WFW, NAGR, RMEF, WSB, NMLS #2014743
    • www.facebook.com/johnwallacemortgage
    • Apply for a loan
Re: Smoke house build
« Reply #8 on: November 30, 2022, 09:07:51 AM »
That's a really nice smokehouse. Well done.  :tup:
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman

Offline 92xj

  • Trade Count: (+26)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3906
  • Location: Out of Place
  • Kill 'em
Re: Smoke house build
« Reply #9 on: November 30, 2022, 09:40:21 AM »
Are there any dampeners towards to top to let more smoke/heat escape or does it just go through the wood joints?

In the early stages of the build pictures, I don't have the exhaust holes cut in.  But the final house does have exhaust ports.  Lots of them, that I can cover individually to really dial it in.
Here is what they look like.


"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Blacklab

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 7359
Re: Smoke house build
« Reply #10 on: November 30, 2022, 11:25:13 AM »
Again nicely done. Thanks for sharing.
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Online TommyH

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 2047
  • Location: Eastside
Re: Smoke house build
« Reply #11 on: November 30, 2022, 02:20:20 PM »
Thanks, looks great.  :tup:

Offline LDennis24

  • Bear poker
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2010
  • Posts: 4296
Re: Smoke house build
« Reply #12 on: November 30, 2022, 02:58:13 PM »
Ooh! I was hoping for this! I didn't think you wanted to share your smokehouse build with us or I would have asked. It seriously crossed my mind several times! Lol Thank you!

Offline 92xj

  • Trade Count: (+26)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3906
  • Location: Out of Place
  • Kill 'em
Re: Smoke house build
« Reply #13 on: November 30, 2022, 03:15:49 PM »
Ooh! I was hoping for this! I didn't think you wanted to share your smokehouse build with us or I would have asked. It seriously crossed my mind several times! Lol Thank you!

Heck, I am always willing.  I actually had a build thread on here years ago, when I actually built it.  The photos went away when photo buckets did their lameness.  Then when I posted up the summer sausage stuff, I had folks mention in the thread and about 15 PMs from folks asking about it. Luckily I was able to find some of the build photos and hosted them with Flickr and was able to post this thread.
Hopefully it helps someone build one and have success at processing their own meat.

Im more than willing to answer any questions about anything and help where I can.
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline LDennis24

  • Bear poker
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2010
  • Posts: 4296
Re: Smoke house build
« Reply #14 on: November 30, 2022, 03:19:28 PM »
Ok thank you so much! So what brand of smoke tube are you using? And do you have a fan to move smoke in to the box?

 


* Advertisement

* Recent Topics

Vortex quick release by Fletch
[Today at 02:00:55 PM]


COUGAR COMMENT TIME by MADMAX
[Today at 01:37:17 PM]


Two Teanaway Cow Tags by teanawayslayer
[Today at 01:17:49 PM]


Pure 14x52 by b23
[Today at 11:56:03 AM]


2024 field reports by hdshot
[Today at 11:44:22 AM]


Wife drew 49 degrees North early any Bull Moose . by Bonnie
[Today at 11:19:50 AM]


Oregon Beulah Deer by polishstunner
[Today at 11:12:14 AM]


Lets Talk Boat Concealment and Stuff by ducks4days
[Today at 10:59:18 AM]


Not a lot of love for Colorado wolves! by LDennis24
[Today at 10:21:53 AM]


Commission MTG PT II TODAY by Loup Loup
[Today at 09:58:11 AM]


TODAY's commission MTG Pt II by Frank The Tank
[Today at 09:46:20 AM]


18 year old daughter drew 204 quality deer by fishngamereaper
[Today at 09:29:31 AM]


Biscuits and Gravy? I'm your huckleberry.... :-) by ghosthunter
[Today at 09:23:07 AM]


Blackhorn 209 by JakeLand
[Today at 08:23:04 AM]


BC Mtn Goat Recommendations by lhrbull
[Today at 07:45:21 AM]


Dodge 48re transmission recommendations by Born2late
[Today at 06:23:04 AM]


Trapping books or the like? by TeacherMan
[Today at 06:03:27 AM]


Toutle Quality Bull - Rifle by Dark2Dark
[Yesterday at 11:29:05 PM]


Billy Clapp Lake by shootem
[Yesterday at 09:49:09 PM]


NW Mountain challenge by Bo_nimrod
[Yesterday at 09:40:14 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal