collapse

Advertisement


Author Topic: Help finishing shoulder elk mount.  (Read 2522 times)

Offline Pete112288

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 1151
  • Location: Vancouver, WA
Help finishing shoulder elk mount.
« on: December 09, 2022, 02:45:16 PM »
So in 2019 I took my elk to have a shoulder mount done. Was a coworker of friend of a friend that does it on the side type of deal. Won't do that again. His full time job got busy, and his personal life took a dump on him. Then he dropped off the face of the planet for a year and a half, at least from my perspective.
Anyway, I have my skull cap/antlers and the hide back. The hide is fully tanned by a tannery he shipped it out to, it looks great as far as I'm concerned, but I don't have a taxidermist experience or eye. I can get some pictures put up later of the hide.
Trying to figure out how to get it finished.
Contacted my first choice, but they said they can't take any more work at the moment and are leary to take on other taxidermist 's unfinished work as it can potentially be more work than doing it from scratch. Which I understand.
So I got ahold of the guy that did my 2020 deer. He said "maybe...maybe not" will have to see it in person. Unfortunately it's quite a drive, so that'll have to wait. Anyone, specifically any taxis that can chime in with advice or anything?
Is Charlie's Taxidermy still a thing?
Found a pic on google of a mount he did that is EXACTLY what I want. Tried tracking him down, no luck yet.
Thanks ya'll

Offline Pete112288

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 1151
  • Location: Vancouver, WA
Re: Help finishing shoulder elk mount.
« Reply #1 on: December 09, 2022, 02:47:06 PM »
This is what I want, I figured it would be OK to post it, as it actually came from HuntWa in the first place haha. If I'm wrong please correct me

Offline Prime Time

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2010
  • Posts: 221
  • Location: Pe Ell
Re: Help finishing shoulder elk mount.
« Reply #2 on: December 09, 2022, 02:58:02 PM »
Charlie isn’t taking anything in anymore.

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 5553
  • Location: Toledo
Re: Help finishing shoulder elk mount.
« Reply #3 on: December 09, 2022, 04:40:08 PM »
This is what I want, I figured it would be OK to post it, as it actually came from HuntWa in the first place haha. If I'm wrong please correct me

That the exact same one I wanted for my Dayton bull. Today I regret settling for something else!

Try Joel at Black River Taxidermy. Hes a sponsor on here and does impressive work. Best of luck to you!

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Help finishing shoulder elk mount.
« Reply #4 on: December 09, 2022, 04:43:02 PM »
Try Frank Specht Taxidermy in Kelso.  You could drive up there and chat.  Nice guy, works in his shop all the time and got my animals done typically in under 6 mo.   

Offline Pete112288

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 1151
  • Location: Vancouver, WA
Re: Help finishing shoulder elk mount.
« Reply #5 on: December 11, 2022, 11:12:30 PM »
Here are some pictures of how it sits at the moment. The chest through neck was skinned like peeling off a tube sock. I had the whole hide intact so I had the whole thing tanned so that I could use the back half to lay over a chair or stretch on the wall somewhere.

Offline Pete112288

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 1151
  • Location: Vancouver, WA
Re: Help finishing shoulder elk mount.
« Reply #6 on: December 11, 2022, 11:12:52 PM »
.

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 18678
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: Help finishing shoulder elk mount.
« Reply #7 on: December 12, 2022, 06:42:51 AM »
Well, you have enough hide that's for sure.  I'd make the drive east or even into idaho, west side guys are just too expensive, unrealistically expensive any more.  Dark timber taxi in colville and wildlife creations in Hayden Idaho are two I'd call.  I can get my wifes moose shoulder mounted at dark timber for 1,500, an elk shoulder mount is 1,095 there. 
“In common with”..... not so much!!

Offline link

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2007
  • Posts: 1113
Re: Help finishing shoulder elk mount.
« Reply #8 on: December 14, 2022, 08:14:27 AM »
Charlie isn’t taking anything in anymore.
Charlie is only 7 years behind.

Offline Ghost Hunter

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 5149
  • Location: SW <-> NE
  • Groups: NRA Patron Life Member, RMEF Life, Sponser Member
Re: Help finishing shoulder elk mount.
« Reply #9 on: December 14, 2022, 08:23:55 AM »
Charlie isn’t taking anything in anymore.
Charlie is only 7 years behind.
Glad I got my WY buck when I did.  He does nice work.
Economy failure = Too many people spending money they don't have on things they don't need to impress people they don't like.

Offline Tball77

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Apr 2021
  • Posts: 81
  • Location: Kitsap
Re: Help finishing shoulder elk mount.
« Reply #10 on: January 04, 2023, 11:23:26 AM »
Its a drive from where you are at but I would bet that Over the hill taxidermy in Clear lake (skagit County) would help you out.  Another option is Critters taxidermy in Gig harbor. 

I had my grandpa's deer antlers put on a mount by over the hill and he did an awesome job recreating it for me and the price was low compared to most.

Critters mounted my first pronghorn, it took 14 months but it turned out incredible.  Good luck

 


* Advertisement

* Recent Topics

Springer 2024 Columbia River by Taco280AI
[Today at 03:45:23 PM]


Springer Fishing Opportunity 3/29 & 3/30 by Blacklab
[Today at 12:48:56 PM]


Long Beach Clamming Tides by dilleytech
[Today at 12:39:19 PM]


Let’s see your best Washington buck by abhold87
[Today at 12:03:27 PM]


Bearpaw Season - Spring 2024 by bearpaw
[Today at 11:45:41 AM]


Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Average by lhrbull
[Today at 07:31:56 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal