collapse

Advertisement


Author Topic: Help with Carry-Lite Mallard Magnum Shell decoy stake replacement  (Read 3756 times)

Offline Geoffphrye123456

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2019
  • Posts: 17
  • Location: Snohomish County
I recently bought a large lot of magnum mallard shell decoys that didn't come with stakes.
Each decoy has three holes (side/side/top) so I assume the OG stakes were a "T" of some sort. I think I want to replace the stakes for a couple of reasons.
The shells are all stacked in groups of 6 right now, and they are cupping badly. I will be splaying the stacks open hoping to get the shape back. But I also want the movement that the stakes provide vs placing on the ground.

Does anyone have a picture of the OG stakes? A link to replacement stakes? Or even a picture of your DIY solution!
Thanks in advance!!

Offline BD1

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2011
  • Posts: 1603
  • Location: Snohomish County
Re: Help with Carry-Lite Mallard Magnum Shell decoy stake replacement
« Reply #1 on: March 07, 2025, 01:12:34 PM »
If the hole is on the back I think I would just use thin doweling sharpened on both ends. Put in the ground and set decoy on top with tip going through the hole. Think of a circus guy balancing a tray on a stick. You might need to modify the hole a bit. I think if done right you would get some nice movement with a breeze. Or....that might not work at all but worth a shot  :dunno: Might need to play with the doweling size, location of the hole and what not. Sounds like a fun "Problem" to try some different ideas with. 
Let us know what you come up with...post pictures if possible.
Good luck,
BD1

Offline M_59

  • Trade Count: (+7)
  • Hunter
  • ***
  • Join Date: Dec 2007
  • Posts: 145
  • Location: Mt. Vernon, WA
Re: Help with Carry-Lite Mallard Magnum Shell decoy stake replacement
« Reply #2 on: March 23, 2025, 11:46:54 PM »
I may have a couple dozen stakes. They will not balance on the single stake. You need the "t" ones. PM me.

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by Rat44
[Today at 12:26:36 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


Archery elk gear, 2025. by spin05
[Today at 12:03:42 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Rainier10
[Yesterday at 10:19:01 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


2025 Canning by Twispriver
[Yesterday at 09:15:12 PM]


2025 Montana alternate list by Edminsterquality
[Yesterday at 08:47:06 PM]


WSTA 2025 Summer Rendezvous Agenda by Trapper John
[Yesterday at 08:00:27 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Yesterday at 07:57:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Yesterday at 11:56:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal