Unknown Suppressors - Whisper Pickle

[dreadi]

Only if they show up at my distributors.

There's other manufacturers with over the barrel designs that have been on the market for more than a hot minute.

The last time a bunch of people hopped on the newest Ti can at that price point, I was asked about  it and it appeared to some people that I'm not of fan of light weight suppressors. I am definitely a fan of Ti silencers but, I would never rush into a new suppressor that doesn't have extensive field experience with consumers. Let some people put a few ten round groups of hot 300WM through it and see if the welds hold.


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms

[pickardjw]

Only if they show up at my distributors.

There's other manufacturers with over the barrel designs that have been on the market for more than a hot minute.

The last time a bunch of people hopped on the newest Ti can at that price point, I was asked about  it and it appeared to some people that I'm not of fan of light weight suppressors. I am definitely a fan of Ti silencers but, I would never rush into a new suppressor that doesn't have extensive field experience with consumers. Let some people put a few ten round groups of hot 300WM through it and see if the welds hold.


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms

I know they're doing destructive testing, can't remember the specifics. Knowing those guys it'll be right on the edge of ridiculous.

Not sure weld failure will be a concern on a 3D printed can but I'm not a machinist by any means.

[dreadi]

Only if they show up at my distributors.

There's other manufacturers with over the barrel designs that have been on the market for more than a hot minute.

The last time a bunch of people hopped on the newest Ti can at that price point, I was asked about  it and it appeared to some people that I'm not of fan of light weight suppressors. I am definitely a fan of Ti silencers but, I would never rush into a new suppressor that doesn't have extensive field experience with consumers. Let some people put a few ten round groups of hot 300WM through it and see if the welds hold.


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms

I know they're doing destructive testing, can't remember the specifics. Knowing those guys it'll be right on the edge of ridiculous.

Not sure weld failure will be a concern on a 3D printed can but I'm not a machinist by any means.

I'm glad to hear they are doing destructive testing. It would be a shame for a mfg to publish no barrel length restrictions and then have to come back around say "within reason".

Neither am I. Welds, glue, fusion, mechanical adhesion, chemical bonding, whatever it is, I hope no one is disappointed in its performance.


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms

[James]

I'll be interested, once it is on the market for a while.

Savage also just released an over the barrel suppressor, which I will be watching too.

What I really want is a suppressor that's a bit more modular.  Modular end caps for different calibers, extra sections to increase volume/baffles including reflex sections. Probably won't be the lightest, even is the smallest configuration, but it quite versatile.

[Sundance]

I'll be interested, once it is on the market for a while.

Savage also just released an over the barrel suppressor, which I will be watching too.

What I really want is a suppressor that's a bit more modular.  Modular end caps for different calibers, extra sections to increase volume/baffles including reflex sections. Probably won't be the lightest, even is the smallest configuration, but it quite versatile.

https://jkarmament.com/product-category/suppressors/#

JK Armament has been in the game for a bit, might want to check them out

[dreadi]

I'll be interested, once it is on the market for a while.

Savage also just released an over the barrel suppressor, which I will be watching too.

What I really want is a suppressor that's a bit more modular.  Modular end caps for different calibers, extra sections to increase volume/baffles including reflex sections. Probably won't be the lightest, even is the smallest configuration, but it quite versatile.

You want a SilencerCo 46M?
Front comes off. It's 46 cal, you can put caps on down to .224


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms

[dreadi]

I'll be interested, once it is on the market for a while.

Savage also just released an over the barrel suppressor, which I will be watching too.

What I really want is a suppressor that's a bit more modular.  Modular end caps for different calibers, extra sections to increase volume/baffles including reflex sections. Probably won't be the lightest, even is the smallest configuration, but it quite versatile.

https://jkarmament.com/product-category/suppressors/#

JK Armament has been in the game for a bit, might want to check them out

Do you own or have shot any of their stuff?


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms

[pickardjw]

Some more finalized info came out yesterday for the .760" barrel profile version.

1.55” diameter
10.5oz
Sub 132dB at the shooter's ear with .308 20” - if that's repeatable with the TBAC summit testing it's very competitive.

https://rokslide.com/forums/threads/um-s2h-suppressors-scopes-and-more.394379/post-4145040

Sounds like there will be one or more at the Blue Ridge NRL in Benge, WA in June if anyone is attending that.

And some info on distribution, "We will be using silencershop for transfers inside the Unknown Munitions shop, other than that we will be form 3 transferring to any dealer of your choosing and it is up to them how they want to do the form 4."