collapse

Advertisement


Author Topic: Build Your Own Bowfishing Arrows  (Read 30890 times)

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31430
  • Location: Goldendale,WA
Build Your Own Bowfishing Arrows
« on: July 14, 2011, 04:21:02 PM »
Well I found some time to work up some new arrows.This is how I build my arrows. Sometimes you can save a few bucks on doing this yourself. I like to do all my own stuff because I am very picky on my own gear :chuckle: Here is some pictures that might help you with your own build. As always build your own stuff at your own risk  :tup:

I am using some new stuff on this build. The uni nock adapters and nocks by muzzy. Most times I just use simple glue on nocks. I had a arrow with a busted nock so I also did that one the other way to show how they look.

Pic 1: First we start with the blanks. I like colored arrows the best orange and yellow work best. These are just solid fiberglass arrows. I like to take a coarse sand paper and ruff up both ends of the arrows so that the epoxy sticks better. The blanks are very slick and you get a better bond this way.

Pic 2: Some of the supplies we will be using on this build. Ams safety slides "on all my arrows" 2 diffrent points same brand, one setup is 2 barb and the other 3 barb grapples. Uni nock adapters and nocks.

Pic 3: The epoxy I use which has always worked great for me.

Pic 4: The 2 diffrent types of nocks used on bowfishing arrows.
« Last Edit: July 14, 2011, 04:46:45 PM by carpsniperg2 »
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31430
  • Location: Goldendale,WA
Re: Build Your Own Bowfishing Arrows
« Reply #1 on: July 14, 2011, 04:41:22 PM »
First you need to mix up a small batch of epoxy to mount the nock and addpaters.  Apply epoxy on the inside of the adapters and the push on nock. When installing the push on nock it is important that the nocks grove is lined up with the hole for the safety slide. If not the safety slide will not work on that arrow and hit the rest when you shoot. The uni nock adapter does not matter because you can twist the nock to match up with the slide stopper.
Pic 5: Uni nock adapters installed and glue on nock installed.

Next install the ams safety slide stops. You will need a Phillips Head screw driver to do this. combine the 2 parts of the safety stop and then thread screw into the stop. Then screw the stop into the arrow,screw it down all the way! The longer slide of the stop goes in from toward the point.
Pic 6: Safety slide stops installed.

Next you will need to add the slides, make sure they are facing the right direction. You will not be able to put these on after the points and nock adapters and stops are installed.
Pic 7: Slides on the arrow facing the right way.

What I like to do is add epoxy to the hole that has the screw threw it. This helps keep the screw from backing out. Also a small bead around the base of the nock or adapters always helps strength them.
Pic 8: Epoxy added to the holes and the base of the nock or adapters.

Next comes the big part. Adding the points. You do not want to skip on the amount of epoxy. Make a good sized batch and work on only 1-2 arrows at a time. Put the epoxy on the inside of the point then slide it onto the arrow. Twist it a few times to even out the epoxy. You will want to then place the arrow point down on the floor and press and hold the arrow down. This will make sure the arrow point is seated all the way to the bottom and bonds there. Wait a min or two and do your next arrow.
Pic 9: Points installed- I also like to add a small bead around the base of the point. This is done later after the points have bonded with the arrow shaft.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31430
  • Location: Goldendale,WA
Re: Build Your Own Bowfishing Arrows
« Reply #2 on: July 14, 2011, 04:46:00 PM »
Then after a few hours of setting up they are good to go. I like to let them setup 1-2 days because like I said I am picky :chuckle:

I also wait to push the nocks into the adapters until after they are dry because if there is any epoxy not setup yet then your replaceable nock just became a permanent nock :chuckle:

Hope this might help some :tup: Good shooting carpsniperg2 :tup:

Also as always feel free to ask me any questions you might have on this subject or any others! Always glad to help :tup:

Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31430
  • Location: Goldendale,WA
Re: Build Your Own Bowfishing Arrows
« Reply #3 on: July 14, 2011, 04:47:36 PM »
Unlocked and feel free to post :tup:
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline BOWHUNTER45

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Nov 2009
  • Posts: 14731
Re: Build Your Own Bowfishing Arrows
« Reply #4 on: July 23, 2011, 04:37:51 PM »
beautiful man ...  :tup:

Offline Docgcarr

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jul 2011
  • Posts: 4
  • Location: Seattle
Re: Build Your Own Bowfishing Arrows
« Reply #5 on: July 23, 2011, 06:27:37 PM »
Hello,  first post to this site.  Name is Gary.  Moving to Seattle area from Mississippi.  Bowhunted past 20 years.  Leaving a wonderful 7000 acre whitetail bow hunting only club on MS River.  Painful!!  Looking for hunting clubs/ opportunities in Washington.  All leads appreciated!  Thanks, Gary

Offline agchawk

  • AGCHAWK
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1256
  • Location: Clarkston, WA
Re: Build Your Own Bowfishing Arrows
« Reply #6 on: July 23, 2011, 06:50:22 PM »
Very nice! Thanks for posting this up...looks like something I'd like to give a try.

Offline BOWHUNTER45

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Nov 2009
  • Posts: 14731
Re: Build Your Own Bowfishing Arrows
« Reply #7 on: July 23, 2011, 07:10:14 PM »
Then after a few hours of setting up they are good to go. I like to let them setup 1-2 days because like I said I am picky :chuckle:

I also wait to push the nocks into the adapters until after they are dry because if there is any epoxy not setup yet then your replaceable nock just became a permanent nock :chuckle:

Hope this might help some :tup: Good shooting carpsniperg2 :tup:

Also as always feel free to ask me any questions you might have on this subject or any others! Always glad to help :tup:
Watch you do not scratch that table ... :yike: :bdid: :tup:

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31430
  • Location: Goldendale,WA
Re: Build Your Own Bowfishing Arrows
« Reply #8 on: July 23, 2011, 10:43:00 PM »
Do you see that table? LOL
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline soccerftw123

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2012
  • Posts: 121
  • Location: washington
  • Groups: nwtf
Re: Build Your Own Bowfishing Arrows
« Reply #9 on: December 29, 2016, 02:31:01 PM »
Have you changed this set up at all since then? Just getting into building my own arrows, thanks for posting!

 


* Advertisement

* Recent Topics

Let’s see your best Washington buck by high_hunter
[Yesterday at 10:31:08 PM]


Bearpaw Season - Spring 2024 by actionshooter
[Yesterday at 09:43:51 PM]


Walked a cougar down by MADMAX
[Yesterday at 08:31:53 PM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]


Long Beach Clamming Tides by Encore 280
[Yesterday at 05:16:00 PM]


WTS Suppressors I Can Get by dreadi
[Yesterday at 03:30:33 PM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by Longfield1
[Yesterday at 03:27:51 PM]


Straight on by kentrek
[Yesterday at 03:04:53 PM]


2024-2026 Hunting Season Proposals by trophyhunt
[Yesterday at 01:51:40 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal