Equipment & Gear > Power Equipment & RV
Resetting dash warning lights
Woodchuck:
--- Quote from: Buckmark on May 28, 2025, 02:56:41 PM ---Bet you have an ABS fault code hence the trac control and stabilitrac lights as those systems will be disabled by an ABS issue and those warnings come on.
A basic code reader usually wont access ABS codes, you will need an actual scan tool.
Sounds like a hard fault as they wont clear/reset right away when the key is activated (ABS systems run a self check on power up.)
Electrical tape over the lights :chuckle:
--- End quote ---
WINNER WINNER, CHICKEN DINNER!
jackelope:
--- Quote from: Buckmark on May 28, 2025, 02:56:41 PM ---Bet you have an ABS fault code hence the trac control and stabilitrac lights as those systems will be disabled by an ABS issue and those warnings come on.
A basic code reader usually wont access ABS codes, you will need an actual scan tool.
Sounds like a hard fault as they wont clear/reset right away when the key is activated (ABS systems run a self check on power up.)
Electrical tape over the lights :chuckle:
--- End quote ---
All accurate information. Almost like you know what you’re talking about.
Sandberm:
--- Quote from: Buckmark on May 28, 2025, 02:56:41 PM ---Bet you have an ABS fault code hence the trac control and stabilitrac lights as those systems will be disabled by an ABS issue and those warnings come on.
A basic code reader usually wont access ABS codes, you will need an actual scan tool.
Sounds like a hard fault as they wont clear/reset right away when the key is activated (ABS systems run a self check on power up.)
Electrical tape over the lights :chuckle:
--- End quote ---
So I need to pay someone who has "an actual scan tool" to get this fixed and/or the light to go off?
HUNTINCOUPLE:
--- Quote from: Sandberm on May 28, 2025, 09:32:06 PM ---
--- Quote from: Buckmark on May 28, 2025, 02:56:41 PM ---Bet you have an ABS fault code hence the trac control and stabilitrac lights as those systems will be disabled by an ABS issue and those warnings come on.
A basic code reader usually wont access ABS codes, you will need an actual scan tool.
Sounds like a hard fault as they wont clear/reset right away when the key is activated (ABS systems run a self check on power up.)
Electrical tape over the lights :chuckle:
--- End quote ---
So I need to pay someone who has "an actual scan tool" to get this fixed and/or the light to go off?
--- End quote ---
I wouldn’t pay someone to put electric tape over the lights. :chuckle:
Woodchuck:
--- Quote from: Sandberm on May 28, 2025, 09:32:06 PM ---
--- Quote from: Buckmark on May 28, 2025, 02:56:41 PM ---Bet you have an ABS fault code hence the trac control and stabilitrac lights as those systems will be disabled by an ABS issue and those warnings come on.
A basic code reader usually wont access ABS codes, you will need an actual scan tool.
Sounds like a hard fault as they wont clear/reset right away when the key is activated (ABS systems run a self check on power up.)
Electrical tape over the lights :chuckle:
--- End quote ---
So I need to pay someone who has "an actual scan tool" to get this fixed and/or the light to go off?
--- End quote ---
I believe that's what he's telling you. Depending on your location, you might shoot him a pm.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version