Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: mazama on September 11, 2012, 06:54:59 PM


Advertise Here
Title: colt 1911 disembely
Post by: mazama on September 11, 2012, 06:54:59 PM
What is easy way to disemble colt 1911 govt.
Title: Re: colt 1911 disembely
Post by: copasj on September 11, 2012, 07:00:39 PM
Lot's of answers depending on the setup and how far you want to disassemble it.  You tube should have a few video's.  It's pretty easy, but trying to write it out would take awhile.

Sent from my DROID3 using Tapatalk 2
Title: Re: colt 1911 disembely
Post by: Slenk on September 11, 2012, 07:06:42 PM
http://coolgunsite.com/disassembly/disassembly.htm (http://coolgunsite.com/disassembly/disassembly.htm)
Title: Re: colt 1911 disembely
Post by: Huntbear on September 11, 2012, 07:08:35 PM
What is easy way to disemble colt 1911 govt.

One pin and spring at a time.... 
Title: Re: colt 1911 disembely
Post by: ArrowH on September 11, 2012, 07:36:05 PM
hand load a double charge, plug the barrel and touch it off!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                :chuckle: :chuckle: :chuckle:
Title: Re: colt 1911 disembely
Post by: mazama on September 11, 2012, 08:00:24 PM
Got it apart,little more work than A glock.
Title: Re: colt 1911 disembely
Post by: copasj on September 11, 2012, 08:06:49 PM
True, but you don't have to pull the trigger to disassemble it either =p.

Be careful putting the slide release back, you don't want an idiot scratch on your new toy!

Sent from my DROID3 using Tapatalk 2
Title: Re: colt 1911 disembely
Post by: 300rum on September 12, 2012, 09:17:51 AM
Field strip or detail cleaning?  If detail cleaning and taking it completely apart, (which I do only twice a year after about 15k rounds or so) make sure that you have a couple of hours.  If you know someone who can help you it will be easier.  Youtube helps if it is your first time but watch multiple videos and also look for some still photos.     
Title: Re: colt 1911 disembely
Post by: mazama on September 12, 2012, 09:38:28 AM
This gun was a military gun that my bosses father had as a service gun,took me about 1hr to take apart and put together,found a little rust inside of barrel crown.
SimplePortal 2.3.7 © 2008-2025, SimplePortal