Hunting Washington Forum

Equipment & Gear => Power Equipment & RV => Topic started by: JohnVH on May 30, 2013, 08:04:37 AM


Advertise Here
Title: any travel trailer furnace experts around?
Post by: JohnVH on May 30, 2013, 08:04:37 AM
mid 90's atwood hydroflame 8525 - III furnace, lights occasionally, and isnt consistent running. Ive pulled the burner and electrodes out, everything looks new, they put a new board on it last year. It turns on, fan runs, you can hear the thing sparking away in there for 3 cycles, then shuts down and flashes the 3 lights on the board.

Im kind of stumped, everything else in the trailer works great, thoughts?

(https://hunting-washington.com/smf/proxy.php?request=http%3A%2F%2Fjohnvh.smugmug.com%2FOther%2FTT%2Fi-Z3qXp9Z%2F0%2FXL%2FCA_05291317492926-XL.jpg&hash=9cc48f8bce16376a08ed0d33f8125e1534bcab85)
Title: Re: any travel trailer furnace experts around?
Post by: Elkbow33 on May 30, 2013, 08:13:39 AM
I assume your gas is on.  If there's a spark your gas valve is not opening.  May be bad gas valve, or the board is not sending the signal to gas valve for it to open.
Title: Re: any travel trailer furnace experts around?
Post by: JohnVH on May 30, 2013, 08:15:23 AM
if I hook 12v up to the gas valves can I hear them click to test them?

how far off the burner should the ignitor and the other probes be?
Title: Re: any travel trailer furnace experts around?
Post by: Elkbow33 on May 30, 2013, 08:24:25 AM
Yes.  You should be able to open cover and visually see it?  As for distance not exactly sure, but if it worked before that is probably not the problem.  Also clean probes of gently with light sand paper. 
Title: Re: any travel trailer furnace experts around?
Post by: JohnVH on May 30, 2013, 08:47:05 AM
picture above is the burner and the probes.

Here is the other side. Ill pull it out again tonight.

(https://hunting-washington.com/smf/proxy.php?request=http%3A%2F%2Fjohnvh.smugmug.com%2FOther%2FTT%2Fi-Zv7hs3M%2F0%2FXL%2FCA_05291317493582-XL.jpg&hash=987b248a9987da4a7922f55ef7be0d25219351df)
Title: Re: any travel trailer furnace experts around?
Post by: wildmanoutdoors on May 30, 2013, 08:48:05 AM
I changed my board in my Suburban furnace to a Dino board. The connector hooks up pretty good but not perfect. Mine does the same thing and I just have to wiggle the connector on the board and it works fine for the trips duration.
Title: Re: any travel trailer furnace experts around?
Post by: JohnVH on May 30, 2013, 08:50:16 AM
I changed my board in my Suburban furnace to a Dino board. The connector hooks up pretty good but not perfect. Mine does the same thing and I just have to wiggle the connector on the board and it works fine for the trips duration.

Yours did the same things as mine?
Title: Re: any travel trailer furnace experts around?
Post by: wildmanoutdoors on May 30, 2013, 08:54:35 AM
Yes, Sometimes it would light, then die. Or just not light at all. Just clicked away into safty mode. Wiggle the connection and its runs perfect for days. Untill it sits again with no use for awhile.
Title: Re: any travel trailer furnace experts around?
Post by: JohnVH on May 30, 2013, 08:54:40 AM
video, it actually lit on the 3rd cycle this time, and it works great once it lights, but it wouldnt light off after this again.

Tt2 (http://www.youtube.com/watch?v=t-8umQs6Q_8#ws)
Title: Re: any travel trailer furnace experts around?
Post by: JohnVH on May 30, 2013, 08:56:45 AM
this one it doesnt light and shows the codes

Tt3 (http://www.youtube.com/watch?v=9iOzF7dkqmE#)
Title: Re: any travel trailer furnace experts around?
Post by: baker5150 on June 12, 2013, 03:51:24 PM
Flame sensor or gas valve solenoid.  Send 12v to the gas valve solenoid with everything hooked up and see if gas comes out.  You may or may not hear it open and close.  Probably not.  Try it a few times.  If it consistently opens and you have gas coming out then change your flame sensor.  THey are cheap.  Its the probe that doesnt spark.  Let me know.
Also be sure to disconnect the spark probe before testing the valve.  No need to get burnt.
Title: Re: any travel trailer furnace experts around?
Post by: JohnVH on June 12, 2013, 03:55:27 PM
Forgot to update this thread, when I put 12v to the solenoids they open and it lights off instantly, the board isnt consistant on opening the solenoids and only puts out 7v

SO, I have a voltage stepper to try to up the voltage out of the board, if that doesnt help, Ill buy a dinosaur board for it.


Hydro Flame 8525 III (http://www.youtube.com/watch?v=nLlxeKxHNiY#ws)
Title: Re: any travel trailer furnace experts around?
Post by: JohnVH on June 12, 2013, 06:23:32 PM
FIXED, just had to step the voltage up a few to make the solenoids open, works flawlessly now. $15 part and some brains.  :tup:


FPV parts fix an RV furnace (http://www.youtube.com/watch?v=4IjKHjWLrr0#ws)
SimplePortal 2.3.7 © 2008-2025, SimplePortal