Hunting Washington Forum
Big Game Hunting => Bow Hunting => Topic started by: olystorageland on August 18, 2013, 08:38:09 AM
-
It started yesterday, about 1 out of every 8-10 pullbacks it does this...at the end of the draw it makes a loud clicking/rotating sound...does anybody have a clue? All my arrows r same length, different arrows can cause it (not same arrow)...any help b much appreciated
-
It is your draw stop hitting your string or limbs. Getmsome felt or surgical tubing or velcro and put it around the peg that is on your cam and hits your string. Or hits your limb depending on what kind of bow you have.
-
Check all the screws on your cams and make sure nothing has come loose
-
Usually it my poor old shoulder popping in and out :) check the your limbs make sure you don't have a crack at your tension screw
-
Is it a pse? Mine did that and it was the screws in the limbs they need to be tightnd to the right tension or else the limbs click.
-
If its a bow tech check the c clips at the ends of the pins that hold your cams
-
my fall away clicks abit when it pops up .
-
I had something similar happening on my bow a week or so ago and it was the string guide? It actually came loose and ended up falling out. Luckily I didn't loose any screws. I would check everything just to make sure but I would imagine you've already done that. At least it's giving you problems at home and not in the field. Good luck!
-
The bearings in your cams might be sticking. I had the same noise with my Mathews. Replaced the cams under warranty and the noise went away.
-
My PSE EVO made the same sound, till I found a loose screw on the cam. I can say I am not impressed with the quality of this PSE , going to sell my EVO after the season is over.
-
had some screw loose and part of the draw...all fixed and ready to go...thanks for the advice....Lucky shot in chehalis helped me out- 1st experience there was awesome!!!
