Hunting Washington Forum
Equipment & Gear => Archery Gear => Topic started by: CementFinisher on April 19, 2014, 04:37:04 PM
-
When i come to full draw my peep ends up in different orientations. how do i fix this?
-
My guess is yoir dloop is slipping. If its in a different twisted left or twisted right everytime. Your d loop should be stright inline with the peep if it turns a little left or right at every shot and you dont recenter it this can happen :twocents:
-
fairly new to archery, how do you tighten the d loop
-
How okd is the string? If its too new the peep might shift due to break in. Any shop should be able to reset it for you
-
What type of strings are you shooting? Some factory strings take a while to settle in. Most after market strings are very solid and do not twist. If you do not have the tool for tightening your D lood you can take a screwdriver(preferabbly a phillips) put it thru the D loop , hold the riser and PULL!!!. Draw your bow to see which way it goes. Turn you D loop slightly to allow for the rotation. Depending on the string type or manufacturer it may not stop moving. If it settles down now it may move again in the heat. I shoot winners choice, I made my own strings for years, It was less time consuming to order strings from Mike and just put them on the bow. If you have time and the knowledge making strings can be a good thing to know. I place my new string on the bow,line up my D loop with the peep and never touch it again.
