Hunting Washington Forum
Equipment & Gear => Archery Gear => Topic started by: Kc_Kracker on October 05, 2014, 12:12:39 PM
-
easton gamegetter, http://www.3riversarchery.com/Easton+Gamegetter%2526reg%253B+XX75+Aluminum+Arrows_i6777X_variablekit.html (http://www.3riversarchery.com/Easton+Gamegetter%2526reg%253B+XX75+Aluminum+Arrows_i6777X_variablekit.html)
specs point ----400 / 2117 -----21/64"----GPI 12.0---length 31-3/8"----insert 29gr
im shooting a kodiak at 60 lbs
-
:dunno:
-
Not sure, maybe you should pray and find out... :chuckle:
-
Why aluminum? Not that I am apposed to aluminum, but having shot both I prefer carbon. I am no pro, but It will depend on your tip weight in grains. That is a long arrow and it appears you are on the cusp with the 400 / 340...I thing the 340 would be a better choice for a 60 lbs bow with 31" arrow. I would place a 125 grain tip broadhead on it. :twocents:
-
thats what i have
-
Not sure, maybe you should pray and find out... :chuckle:
:chuckle: maybe God likes rifles better :dunno:
-
Nice to see another "fingers" shooter. I have some spare arrows from my first compound. After a limb delaminated I switched to a release and overdraw so the old arrows just sit. Most are unused. They are 2315 in Autumn Orange and 32 1/2 inches in length. If that interests you, send me a PM.
I may have 3 dozen.
-
what on earth are you guys talking about
-
what on earth are you guys talking about
Read your thread title... :chuckle:
-
what on earth are you guys talking about
Read your thread title... :chuckle:
heheheh made me chuckle
-
:lol4:
-
lord, stupid fat fingers :D :chuckle: :chuckle: :chuckle: :chuckle:
-
They could be Cupid arrows. :dunno:
-
What draw length do you have with the recurve? What length will the arrows be cut to? Lots of variables to take in to account. At the bottom of that page there is a spine selections chart.
Also this link may help you out a bit. http://www.3riversarchery.com/SpineCalculator.asp?pass=2 (http://www.3riversarchery.com/SpineCalculator.asp?pass=2)
You can PM me if you have a lot of specific questions.
-
After reading your other thread I realized that the Kodiak is a compound not a recurve. I assumed that you had a bear Kodiak recurve. 400's would be a little lite. I would go with the 340's if you want the Gamegetters.
-
400's would be a little lite. I would go with the 340's if you want the Gamegetters.
400's would be more than a little lite in spine. Even the 2216 at .375 spine is going to be a little lite. 360 to 340 spine should be your target with the 125 grain point. 31 3/8"...you must be built like a gorilla :chuckle: