Post by: jrebel on March 29, 2015, 11:43:21 AM
Well, lying in bed I thought to myself...why not my H414? The next day I was back at the rang with two loads worked up. Both shot good, but the 48 grains H414 pushing the 150 grain accu bond was down right scary accurate. 5 shot groups sub one inch out of the R25....DONE!!!! I have my load. I will take pics next time I am at the range, but this thing is wicked accurate.
Anyone else load .308 with h414?? if not and you are thinking about working a laod....you may give it a try.
Post by: yorketransport on March 29, 2015, 06:48:00 PM
Good to hear that the R25 is shooting so well. 1 MOA is pretty good for a gun like that in my book, especially for 5 shots. :tup:
Andrew
Post by: jrebel on March 29, 2015, 06:55:56 PM
I had a pound of H414 that's been sitting on my shelf for months that I had never used. I ended up throwing it into some 30-06 cases to try in a Rem 742. Sure enough it shot about 1.5 MOA, which is pretty darn good for that gun (or any 742 for that matter!). I don't even remember why I bought that powder!
Good to hear that the R25 is shooting so well. 1 MOA is pretty good for a gun like that in my book, especially for 5 shots. :tup:
Andrew
Best I could do with any other powder was 1 1/4" to 2" groups. Half the people I talked to said that would be the best I could do....the other half swore the gun would shoot sub 1". I was almost ready to sell the dumb thing.....when all of a sudden the H414 gods spoke to me..LOLOLOL I should have taken a picture....5 shots 4 cutting the same holes and one 1/4" outside the others. Amazing!!!!! Took it to 200 yards and held sub 2" groups. This thing can shoot.....Just loaded up 50 rounds today and may take it bear hunting at the end of the week. :tup:
Post by: stevemiller on March 29, 2015, 09:53:13 PM
Post by: jrebel on March 29, 2015, 09:59:22 PM
Post by: stevemiller on March 29, 2015, 10:07:11 PM
Post by: jrebel on March 29, 2015, 10:10:14 PM
jrebel,when you load up a round and check it against your chrono what kind of variances do you get between rounds?i shot 10 6 were dupes another member said that was very rare and cause to think it was wrong.so i wonder how rare is it to have rounds that are coming up as close as 5-10-15 fps apart?
Tried to PM you a few links to post with some of my chrono'd groups....but it said you blocked my PM's?? :dunno: :dunno:
Good luck and let us know what you find out.
Post by: stevemiller on March 29, 2015, 10:25:43 PM
Post by: thinkingman on March 30, 2015, 09:09:53 AM
It works well in both 7-08 and 300WSM.
And it is one of the temp-tolerant powders.
Post by: DRobnsn on March 30, 2015, 09:52:14 AM
Working on my LR308 right now. Took it out this weekend and had some issues with the bolt stop hanging up causing feed failures. So its off to the internet for parts. I'm also thinking about building another upper with a 18" barrel to cut down on weight so its always good to have load data! Thanks JREBEL!!!