Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: jdb on June 14, 2015, 08:42:46 AM


Advertise Here
Title: Tikka ftf
Post by: jdb on June 14, 2015, 08:42:46 AM
My son bought a tikka .22-250 with his graduation money and it won't feed from the magazine? Any ideas?
Title: Re: Tikka ftf
Post by: grundy53 on June 14, 2015, 08:53:09 AM
Probably a bad magazine.
Title: Re: Tikka ftf
Post by: Elliott on June 14, 2015, 08:54:40 AM
Remove the stock and put it back together?  :dunno: sometimes their just missaligned. If that doesnt work take it back and get it replaced  :twocents:
Title: Re: Tikka ftf
Post by: magnumb on June 14, 2015, 10:00:17 AM
Make sure that the magazine is firmly in place which means that you need to apply upward pressure until you hear the mag click into the locked position. 

If you don't clearly hear the 'click', it's not seated properly and won't chamber a round.

Good luck.
Title: Re: Tikka ftf
Post by: Bofire on June 14, 2015, 01:46:00 PM
 :)if the action has been removed from the stock alot of guys miss on fitting the recoil lug in properly. I find it easiest to put the barrel up side down, put the lug in the slot properly and then sit the stock onto the action.
Carl
SimplePortal 2.3.7 © 2008-2025, SimplePortal