Hunting Washington Forum

Equipment & Gear => Guns and Ammo => Topic started by: jay.sharkbait on July 14, 2015, 12:03:09 PM


Advertise Here
Title: Today at Grizz Precision
Post by: jay.sharkbait on July 14, 2015, 12:03:09 PM
Finished a couple limited guns and a carry 19

Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 14, 2015, 12:04:00 PM
G19

Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 14, 2015, 12:05:05 PM
Glock 17
Title: Re: Today at Grizz Precision
Post by: trophyhunt on July 14, 2015, 12:09:00 PM
Very Purdy!  What did you do to them to make it custom?
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 14, 2015, 06:01:04 PM
Very Purdy!  What did you do to them to make it custom?

2011= slide is lightened by decking the sides, adding windows and running a ball mill down the sides just above the slide serrations. I checkered the top. The frame has lightning cuts on the side and bottom. Rough comp style stippling.  Barrel and small parts are TiN coated and the pistol refinished in Biggerhammer's Terminal grey.

Glock 19= Front slide serrations. Ghost trigger. Carry stippling, TiN and more Terminal Grey.

Glock 17= Limited competition gun  that showcases what we can do. all the cuts on the slide were done on a manual mill... my head still hurts..
Title: Re: Today at Grizz Precision
Post by: lokidog on July 14, 2015, 07:08:19 PM
Pretty guns!
Title: Re: Today at Grizz Precision
Post by: KimWar1911 on July 16, 2015, 12:34:13 PM
Awesome work. Hope to get my 1911 into you some day.


Sent from my iPhone using Tapatalk
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 16, 2015, 02:37:05 PM
Today was RMR day.

Title: Re: Today at Grizz Precision
Post by: 257wbymagkiller on July 16, 2015, 04:21:27 PM
awesome work! what would cost to do the frame of a glock 31 in Flat dark earth?
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 16, 2015, 08:30:40 PM
awesome work! what would cost to do the frame of a glock 31 in Flat dark earth?


70.00 if you send it stripped.

http://www.grizzprecision.com/cerakote.html
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 23, 2015, 09:16:25 PM
The forge got fired up today for some fun.
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 25, 2015, 11:12:58 AM
The first of what will be a production run..

Warhog double stack 9mm
Title: Re: Today at Grizz Precision
Post by: jackelope on July 25, 2015, 11:39:50 AM
The forge got fired up today for some fun.

I'm gonna need a bottle opener.
Title: Re: Today at Grizz Precision
Post by: CAMPMEAT on July 25, 2015, 01:59:49 PM
Nice work Matt......
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 25, 2015, 02:40:57 PM
The forge got fired up today for some fun.

I'm gonna need a bottle opener.

http://shop.grizzprecision.com/products/hand-forged-bottle-opener
Title: Re: Today at Grizz Precision
Post by: jackelope on July 25, 2015, 02:41:40 PM
The forge got fired up today for some fun.

I'm gonna need a bottle opener.

http://shop.grizzprecision.com/products/hand-forged-bottle-opener

 :tup:
Title: Re: Today at Grizz Precision
Post by: actionshooter on July 25, 2015, 05:06:49 PM
Those bottle openers are damn cool!
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 25, 2015, 06:18:31 PM
Those bottle openers are damn cool!

They are. Wait till you see one first hand.
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 27, 2015, 04:52:16 PM
First of the Diamondcoat carriers are here.

These will offer all the advantages of TiN but with a grey color.
Title: Re: Today at Grizz Precision
Post by: WoodlandShooter on July 28, 2015, 01:19:14 PM
Hey I need the lower forklegs on my KTM DLC coated...
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 28, 2015, 04:29:50 PM
Hey I need the lower forklegs on my KTM DLC coated...

How big are they and what are they made out of?
Title: Re: Today at Grizz Precision
Post by: 2labs on July 28, 2015, 09:05:09 PM
Hi Sharkbait. I have a 30 year old Rem. Nylon that has been a porch/truck gun it's whole life. The receiver and barrel are in rough shape, still shoots awesome.
What would it cost to have it prepped and coated.  20 inch barrel and about 9 inches of receiver.
Thanks.
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on July 29, 2015, 11:38:47 AM
CZ 527 action wrench and switch barrel prototype.

We will be offering a barrel system similar to the Savage.
Title: Re: Today at Grizz Precision
Post by: WoodlandShooter on July 29, 2015, 12:41:51 PM
Hey I need the lower forklegs on my KTM DLC coated...

How big are they and what are they made out of?

bearing surface is chrome plates steel, and the axle clamps are aluminim. only need the bearing surface done, it's ~ 18" long
Title: Re: Today at Grizz Precision
Post by: jakeweb on August 07, 2015, 06:59:01 PM
What would it cost to do a glock 19 like that..minus the yellow
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on August 08, 2015, 01:26:10 PM
AR15/10 side charger knobs are turning now!
Title: Re: Today at Grizz Precision
Post by: CAMPMEAT on August 08, 2015, 01:33:59 PM
Who does the stippling and how long does it take and cost on a 29sf ? Patterns ?
Title: Re: Today at Grizz Precision
Post by: Biggerhammer on August 08, 2015, 04:23:08 PM


I'll take a grey bolt carrier with the side charger installed. :tup:
Title: Re: Today at Grizz Precision
Post by: actionshooter on August 08, 2015, 05:47:09 PM
Grizz is going to bankrupt me......... :chuckle:
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on August 08, 2015, 06:36:12 PM
Who does the stippling and how long does it take and cost on a 29sf ? Patterns ?

We do!

Usually a couple weeks and price varies depending on pattern etc (125-175)

Here are some pics :chuckle:
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on August 08, 2015, 06:37:31 PM
more.....
Title: Re: Today at Grizz Precision
Post by: 300rum on August 08, 2015, 07:36:50 PM
The 2011 is nice.  All it needs is the grip safety pinned and the triggerguard undercut.
Title: Re: Today at Grizz Precision
Post by: CAMPMEAT on August 08, 2015, 07:54:31 PM
Extra cool stippling.....
Title: Re: Today at Grizz Precision
Post by: WoodlandShooter on August 12, 2015, 08:43:48 AM
AR15/10 side charger knobs are turning now!

so, any prints on how to modify my current Bolt carrier and upper to get this to work on my stuff?
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on August 16, 2015, 08:53:48 AM
AR15/10 side charger knobs are turning now!

so, any prints on how to modify my current Bolt carrier and upper to get this to work on my stuff?

I can locate and cut your carrier if you like. What kind of upper are you using? I would start with a slab sided upper.(no fwd assist or shell deflector.) and make the side charging slot. Or better yet buy one of the commercially available uppers. MEGA Eisenach, etc
Title: Re: Today at Grizz Precision
Post by: WoodlandShooter on August 17, 2015, 08:38:43 AM
it's just a standard RRA upper, converted to Piston with an adams arms kit with the AA monolithic bolt carrier
Title: Re: Today at Grizz Precision
Post by: jay.sharkbait on September 18, 2015, 07:14:24 PM
Just finished prototyping AR mag extensions.

Title: Re: Today at Grizz Precision
Post by: yorketransport on September 19, 2015, 07:43:05 AM
You guys should really broaden your horizons; ARs are so boring! :chuckle: But if you've finally out smarted that machine maybe you can come up with something interesting!

What you really need is for some sucker to just throw a pile of parts your way so you can build something in a real caliber! :tup:

Andrew
SimplePortal 2.3.7 © 2008-2025, SimplePortal