Post by: JJD on January 13, 2017, 10:46:27 AM
I bought a few boxes, not knowing they were small primer and have been hanging on to said brass.
More than anything, I was wondering if the loading manual powder charges are still about the same or does primer size make much of a difference?
Post by: Buzz2401 on January 13, 2017, 03:31:17 PM
Post by: 300rum on January 13, 2017, 06:59:35 PM
Post by: JJD on January 14, 2017, 05:50:34 AM
No difference at all. I hated the stuff at first but since you don't have to change your priming systems say for 9mm/.40 and now .45, it was something that should have been done long ago.....
Ya have a good point there.
I'll use the lg primer brass till I run out of the lg primers then likely switch over too.
Post by: 300rum on January 14, 2017, 06:23:03 AM
No difference at all. I hated the stuff at first but since you don't have to change your priming systems say for 9mm/.40 and now .45, it was something that should have been done long ago.....
Ya have a good point there.
I'll use the lg primer brass till I run out of the lg primers then likely switch over too.