Post by: jackelope on January 23, 2018, 11:29:23 AM
:dunno:
Post by: BULLBLASTER on January 23, 2018, 11:40:26 AM
http://www.seekinsprecision.com/ai-tactical-dbm.html
If so that fits into an M5 stock inlet. It’s a standard inlet that many stock makers can inlet for. There is some sizeable differences between it and bdl bottom. Bottom metal height is a pretty important aspect of this set up for good cartridge feeding.
Some of the bottom metals come with pillars already set to correct length. Did the seekins?
It’s not too hard or scary to modify the inlet on the stock. Just go slow and easy and test fit a lot.
Post by: jackelope on January 23, 2018, 11:55:09 AM
:sry:
Post by: jackelope on January 23, 2018, 11:57:52 AM
Post by: BULLBLASTER on January 23, 2018, 12:00:38 PM
There will still be some inletting needed I would imagine. Same thing. Just go slow and test fit.
Post by: jackelope on January 23, 2018, 12:05:10 PM
Ahh. Bombs! :chuckle:
There will still be some inletting needed I would imagine. Same thing. Just go slow and test fit.
Terrifying. Maybe I'll try it on the take off stock first. That's what Bondo is for anyway, right?
Post by: BULLBLASTER on January 23, 2018, 12:06:26 PM
If it uses m5 inlet badger has a template on their website
Post by: jackelope on January 23, 2018, 12:16:51 PM
Yes exactly. Did the mag set up you got come with pillars for the action screws? Does it use ai pattern mags?
If it uses m5 inlet badger has a template on their website
No pillars, yes AI mags. I'll take a look at badger's website.
Thanks!
Post by: jay.sharkbait on January 31, 2018, 08:13:25 PM
Ahh. Bombs! :chuckle:
There will still be some inletting needed I would imagine. Same thing. Just go slow and test fit.
Terrifying. Maybe I'll try it on the take off stock first. That's what Bondo is for anyway, right?
Actually, that's what lipstick is for :)
Post by: jackelope on January 31, 2018, 08:58:56 PM
I’m not sure how to take that lipstick comment.
Post by: yorketransport on February 01, 2018, 04:52:59 AM
Hey you’re back!
I’m not sure how to take that lipstick comment.
Either he mis-read the Bondo comment as bondage, or he’s suggesting that you’d use the lipstick as an indicator while fitting the bottom metal. Coat everything with the lipstick, test fit, then remove material anywhere the lipstick is rubbing off on the stock.
More importantly, the return of Sharkbait means that I have to reset the clock and get my wagers in now. I’m going double or nothing on 13 days.....
Post by: jay.sharkbait on February 01, 2018, 04:53:54 AM
Hey you’re back!
I’m not sure how to take that lipstick comment.
Lipstick works great for fitting metal parts to the stock.
I would find some extra long bolts that have the same thread as the rec'r and cut the heads off. These will act as alignment pins. Then coat the bottom metal with your or your wife's favorite color of lipstick and the rest is easy.
Just be sure to only remove the material that has the coating that's been transferred from the metal and go slowly
Post by: jackelope on February 01, 2018, 07:20:56 AM
Thanks for the tip.
Post by: BULLBLASTER on February 01, 2018, 08:31:52 AM
I assumed that's what you meant....just didn't want to make any lipstick comments that may start a downward spiral...Is there really any downward spiraling left to go for jay or York? :chuckle:
Thanks for the tip.
Post by: jackelope on February 01, 2018, 09:42:51 AM
I assumed that's what you meant....just didn't want to make any lipstick comments that may start a downward spiral...Is there really any downward spiraling left to go for jay or York? :chuckle:
Thanks for the tip.
Hey I was looking at it as a fresh start.
Post by: BULLBLASTER on February 01, 2018, 10:04:10 AM
Im glad to see him back. I like reading his posts.I assumed that's what you meant....just didn't want to make any lipstick comments that may start a downward spiral...Is there really any downward spiraling left to go for jay or York? :chuckle:
Thanks for the tip.
Hey I was looking at it as a fresh start.
Post by: yorketransport on February 01, 2018, 06:39:40 PM
I assumed that's what you meant....just didn't want to make any lipstick comments that may start a downward spiral...Is there really any downward spiraling left to go for jay or York? :chuckle:
Thanks for the tip.
The short answer is yes. Wait, How do I get drug into this? :chuckle: I'm the official Sharkbait translator. I take his cryptic and often confusing posts and reword them into something that's more productive and uplifting. Sometimes his blood sugar is either too low or his blood alcohol level is too high and his otherwise helpful comments don't come out quite right.
Post by: BULLBLASTER on February 01, 2018, 07:05:22 PM
just guilt by association I guess?I assumed that's what you meant....just didn't want to make any lipstick comments that may start a downward spiral...Is there really any downward spiraling left to go for jay or York? :chuckle:
Thanks for the tip.
The short answer is yes. Wait, How do I get drug into this? :chuckle: I'm the official Sharkbait translator. I take his cryptic and often confusing posts and reword them into something that's more productive and uplifting. Sometimes his blood sugar is either too low or his blood alcohol level is too high and his otherwise helpful comments don't come out quite right.
Post by: jackelope on February 01, 2018, 08:48:04 PM
Post by: lamrith on February 02, 2018, 10:36:01 AM
Post by: jackelope on February 02, 2018, 09:51:25 PM