Hunting Washington Forum
Community => Trail Cameras => Topic started by: Kamo2112 on July 23, 2018, 02:03:50 PM
-
Yesterday while setting a cam (Stealth Cam P36) I set it up where I wanted and turned it on to take a few pics while I set my block up, so I could check angle, height and all that good stuff. I checked the 6 pictures it took in that time, cleared the card and put it back in, turned the camera back on. Now it is saying "NoCard". Any ideas what is going on?
-
How did you look at the pictures and clear the card?
-
With the stealth Cam card reader.
-
Did you accidentally lock the card? :dunno:
-
I'm not actually sure on that. I didn't even know that was a feature on an SD card. Ill have to give that a look, when I get home.
-
Clear card with camera only. Do not delete pictures with any other device. Trust me, it will make life way easier.
-
I never switch sd cards with trail cams. I always check and delete right there and put back in cam.. I have never had a issue in 15 years of running cams deleting pics from tablet,phone or laptop and putting back in cam
-
Some of the cams are real particular as to what type of SD card they will take. Try one of the higher quality cards and see if that works.
-
Thanks for all the feed back, guys. It was definitely the lock on the SD card. Thanks DoubleLunger for the thought. I tried putting the card in my reader last night and if I put it in at the right angle it snags the lock and shuts it down :bash: Good news is this just means I have to make another trip to the mountains to set this cam. Silver lining right? Thanks again for all the ideas guys!
-
Thanks for all the feed back, guys. It was definitely the lock on the SD card. Thanks DoubleLunger for the thought. I tried putting the card in my reader last night and if I put it in at the right angle it snags the lock and shuts it down :bash: Good news is this just means I have to make another trip to the mountains to set this cam. Silver lining right? Thanks again for all the ideas guys!
:tup: Right on, ya I never new about that little feature until the exact same thing happened to me!