Post by: Samloffler on October 08, 2019, 11:41:13 AM
I'm plenty happy with my current peep/globe set up, I'm just looking to shoot it with a scope and see what it is really capable of. There are also some opportunities for weapons restricted modern seasons around that may get my attention soon.
Post by: Brushcrawler on October 09, 2019, 06:56:43 PM
Post by: Pinetar on October 09, 2019, 07:05:49 PM
Post by: Sabotloader on October 10, 2019, 09:02:57 AM
I've got a Remington 700 ML, the new one with the case ignition, that I'm looking for a peep/rail combo for. Does anyone know of one? I've looked at Williams and EABCO but neither of them have one for a 700. The Williams is advertised as a rem 700/Mossberg 500 combo so I ordered it and its not even close. I'd prefer a picatiny rail vs the weaver.
I'm plenty happy with my current peep/globe set up, I'm just looking to shoot it with a scope and see what it is really capable of. There are also some opportunities for weapons restricted modern seasons around that may get my attention soon.
There is a company in Boise that might have what you are looking for and certainly have the ability to produce one...
Murphy Precision - might give then a call and check
https://www.murphyprecision.com/
https://www.murphyprecision.com/Products/Item/1010
(https://i.postimg.cc/5y3WjY1w/1-Remington-700-SA-Silver-ISO-1.jpg)
Hope this might help
Post by: woodswalker on October 10, 2019, 09:29:59 AM
Aaron Everett
Grumpys Gun Repair.
Post by: Samloffler on October 10, 2019, 10:25:06 AM
I've been looking around for a peep sight that will go on a pic rail like you would attach a scope ring and so far only found something from XS sights, but it doesn't look nearly as robust as the Williams. Does anyone have any experience with the XS sights peeps? They make a threaded one that will accept the normal apertures.
Aaron, do you think you could mill and drill this one to work on a 700 without tearing up the ramp on the back?
Post by: Sabotloader on October 10, 2019, 10:30:10 AM
(https://i.postimg.cc/Bvjhrr4y/NECG-Weaver-Peep.jpg)
This one is using a regular Warne scope base and then the QR - NECG is placed on the block. Easily removed and a scope mounted back on.
Post by: Samloffler on October 10, 2019, 12:05:17 PM
XS makes a short and a tall. I was thinking the short stacked on a rail would be best, but maybe not based on your pic. The tall looks about the same as your set up. What front sight are you using on there? I've got a low globe on a ramp, but not sure of the actual height.
Post by: Samloffler on October 10, 2019, 12:08:03 PM
Post by: Sabotloader on October 10, 2019, 12:51:24 PM
That is about the set up I'm looking at with the XS sights peeps. Ideally, I'd like to be able to keep the peep on while the scope can come on and off. Obviously that requires a full length rail.
XS makes a short and a tall. I was thinking the short stacked on a rail would be best, but maybe not based on your pic. The tall looks about the same as your set up. What front sight are you using on there? I've got a low globe on a ramp, but not sure of the actual height.
(https://i.postimg.cc/hGzCkLM0/Front-Sight-set-up.jpg)
Just a regular Williams Streamlined Ramp, Williams .343 Fiber Optic, and a Fire Sight Hood. Gives me the illusion that I am shooting through a 1X scope with a post. I do change the Red - Pin to a Green - Pin for better contrast on the target.
(https://i.postimg.cc/Y06QVJfF/Green_Fiber.jpg)
Post by: howlow on October 11, 2019, 07:34:17 PM
And some sort of globe sight up front
Post by: Taco280AI on October 11, 2019, 07:47:34 PM